Top 10 best floater switch for pump
Finding the best floater switch for pump suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best floater switch for pump
1. Barnes 126921 Model SE411 Preassembled Simplex Sewage Package with SE411 Pump, 4/10 hp, 115V, Polyethylene Basin, 18" Split Cover, 2" Vertical Check Valve
Feature
Comes with Barnes Se411 heavy duty 1/2-horse power, 115V sewage pumpLevel control mechanical switch molded inside of a waterproof float
Large capacity 41 gallon polyethylene basin 25" dia. X 24" deep, with 4" inlet hole
Split Cover with Floater, 2" vent, 2" Discharge and cord openings
2 inch
Description
Barnes PitPro Contractor Tough Package 25 by 24-Inch Sewage System with 1/2-Horse Barnes SE411 Sewage Pump.2. Elecall Stainless Steel Tank Water Level Sensor Float Switch 110V ES10010
Feature
Product Name : Water Level Sensor;Stainless steel Material;Contacts : NO+NC;Max Contact Rating : 10WIt does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Material:Stainless Steel. Alternating current: 223v.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water's rise or fall.
Description
Product Features:Product Name : Water Level Sensor;Contacts : NO+NC;
Max Contact Rating :10W;Max Switching Voltage :100V AC/DC;Max Switching Current :0.5A;Max Load Current:1.0A; Max Breakdown Voltage: 110V AC/DC; Max Carry Current :1.0A
Max Contact Resistance:100M;Temperature Rating: -30~+125 degree centigrade;Max Load Pressure: 0.2MPA;Net weight:43g
Installation: top or bottom mounted vertically ; Use medium: water, oil, chemical medium
Product Specification:
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank,
freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers,
carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever
your project may be. It can be easily converted from normally open to normally close by invertin the float. Note: because the current that the switch can carry is much little(0.5A),
you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.
3. Aiskaer 6 Pieces Side mounted Aquarium Tank Side mounted Horizontal Liquid Float Switch Water Level Sensor-Black (Black-1)
Feature
The texture of guide rod: PP plastic;The texture of floater: PP plastic ;Switch formsN.O /N.COpen and close frequentlyAccurate error: 2mm In the water;Repeatability: 1mm In the water
Max Contact Rating :10W;The voltage of work:110VDC;The current of work: 0.5A;Pressure of work: 15 Bar;Temperature of work: -10~80
Float Ball Size(Approx) : 2.35 x 1.7cm (L*D);Thread Dia(Approx) : 1.13cm;Hex Nut Diameter(Approx) : 1.87cm ;Body Total Length : 8.5cm ;Cable Length :39cm
Color : Black;Net Weight : 20g;Package Content : 6 x Water Level Sensor
Description
The description of products:
The plastic float switch of side mount duckbilled is a frequently opened, often closed, switching contact and with the overall brake, it's installed from the outside and doesn't need to be sealed.
The Main parameters of products:
Installation: It is installed horizontally drilling at the bottom or at the top
The texture of guide rod: PP plastic
The texture of floater: PP plastic
Pressure of work: 15 Bar
Temperature of work: -10~80
Accurate error: 2mm In the water)
Repeatability: 1mm In the water)
Switch formsN.O /N.COpen and close frequently
Max Contact Rating :10W
The voltage of work:110VDC
The current of work: 0.5A
It is often used in mechanical equipment, such as environmental protection air conditioning, water cooling fan, water heater, water dispenser, dishwasher, Electric heating barrel, hydraulic press, treatment equipment of water, air compressor and other mechanical equipment, etc.
NOTE: The float switch cannot control solenoid valve directly or high power relay, ac contactor, etc. It will be buffer by adding small relays such as HH54P.
4. FLUENTPOWER 3/4HP 3300GPH Portable Submersible Water Pump, Dirty/Clean Submersible Pump with Revocable Function of Float Switch by its Holder, Included 1"&1.5" MNPT thread for Discharge Hose
Feature
3/4 HP Power High Efficiency- Portable and energy saving Maximum capacity of transferring water up to 3300 GPH and Max delivery height is 26ft, 2200 gallons per hour on a 10-foot discharge lift.Pure Copper Motor with Thermal Protection- Pure copper motor can bring better and more lasting work to the pump. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal protector, pump will rework after cooling down.
Upgraded Sealing Structure- The pump features a durable sealing structure that ensure that the submersible pump has longer life time and more effective pumping, so that pump can be used for farms, swimming pools, fountains, flooded basements, and drainage in typical residential or commercial water transfer applications
1" and 1.5" NPT Thread male connectors included- With 1.5" discharge port will give pump maximum output flow rate. Pump can be worked in water that contains small dirt or solid less than 35mm. Pump also comes with a long 26.2ft cable cord, it can be installed for automatic operation or used in temporary situations
Disable Function of Float Switch- The pump has a special design on float switch, which is very good for customers who don't like to use float switch. To disable the function of float switch, you just need simply put it on its side slot. So that the pump becomes manually controlled by plug in or out socket. When floater is on its side slot, pump becomes compulsively at "ON" postion all the time. This can be used when water level is low and not enough for floater freely floating in the water
Description
Specifications:Clean/Dirty submersible water pump with float switch
Powerful 3/4 HP, copper winding motor, upgraded Seal Structure
Stainless case and durable PP plastic base
Thermal Overload Protection prevents motor burn because of dry running or impeller block
Maximum flow rate up to 3300GPH and Maximum lift water up to 26 feet
Removes water down to 2 inch
Float and flat base can allows for pit installation and automatic operation
Included in this Package:
Pump (operating with 110V~120V)
Instruction Manual
Adapter fits discharge hose size 1", 1-1/4", and 1-1/2" by using clamp to fix hose
After dis-assembled top outlet, its elbow has male thread G1.5" and can be connected with bigger hose
Ideal for:
It can be used to quickly remove water from pools, ponds, water tank and other large bodies of water
Irrigating Garden
Draining flood from cellars or basements
Powering waterfalls or fountains
Transferring water from unwanted place
Tips:
If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port. The bigger the flow is, the wider the outlet should be
Before starting, tilt the pump to remove all air and wait for 15 seconds
If the water level is not enough height for float switch freely floating, you can use float buckle mode, pump can still work, which means manual operation
About FLUENT TOOLS was founded in 2008 with the goal of creating user-friendly and energy saving products. We are professional manufacturer of garden water pump. Our customers include Tool retailer companies, supermarket, and DIY stores
5. uxcell Liquid Water Level Controller Stainless Steel Dual Ball Float Switch ZP12010-2
Feature
Product Name : Floating Switch;Model No. : ZS12010-2;Max Contact Rating : Max Contact Rating;10W : 10WMax Switching Voltage : 100V DC;Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1A
Max Contact Resistance : 100m;Max Temperature : -30C - +120C;Material : Stainless Steel, SUS304;Thread Dia(Approx) : 10mm / 0.39"
Thread Length : 15mm / 0.59";Switch Length (Thread Length Excluded) : 120mm / 4.7";Cable Length : 34cm / 13.4"
Color : Silver Tone;Net Weight : 64g;Package Content : 2 x Floating Switch
Description
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here.6. FLUENTPOWER 3/4 HP Sump Pump with Max Flow 3300 GPH for Dirty/Clean Submersible Water Pump with Revocable Function of Float Switch, Included 1" MNPT thread connector for Pond, Puddle, Swimming Pool
Feature
3/4 HP Power High Efficiency- Portable and energy saving Maximum capacity of transferring water up to 3300 GPH and Max delivery height is 26ft, 2200 gallons per hour on a 10-foot discharge lift.Pure Copper Motor with Thermal Protection- Pure copper motor can bring better and more lasting work to the pump. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal protector, pump will rework after cooling down.
Upgraded Sealing Structure- The pump features a durable sealing structure that ensure that the submersible pump has longer life time and more effective pumping, so that pump can be used for farms, swimming pools, fountains, flooded basements, and drainage in typical residential or commercial water transfer applications
Disable Function of Float Switch- The pump has a special design on float switch, which is very good for customers who don't like to use float switch. To disable the function of float switch, you just need simply put it on its side slot. So that the pump becomes manually controlled by plug in or out socket. When floater is on its side slot, pump becomes compulsively at "ON" postion all the time. This can be used when water level is low and not enough for floater freely floating in the water
1" and 1.5" NPT Thread male connectors included- With 1.5" discharge port will give pump maximum output flow rate. Pump can be worked in water that contains small dirt or solid less than 35mm. Pump also comes with a long 26.2ft cable cord, it can be installed for automatic operation or used in temporary situations
Description
Specifications:Clean/Dirty sump pump with float switch
Powerful 3/4 HP, copper winding motor, Upgraded Seal Structure
Durable PP plastic case construction
Thermal Overload Protection prevents motor burn because of dry running or impeller block
Maximum flow rate up to 3300GPH and Maximum lift water up to 26 feet
Removes water down to 2 inch
Float and flat base can allows for pit installation and automatic operation
Included in this Package:
Pump (operating with 110V~120V)
Instruction Manual
Multiple Adapter fits discharge hose size 1", 1-1/4", and 1-1/2" by using clamp or hose thread directly
After dis-assembled top outlet, its elbow has male thread 1.5" and can be connected with bigger hose
Ideal for:
It can be used to quickly remove water from pools, ponds, water tank and other large bodies of water
Irrigating Garden
Draining flood from cellars or basements
Powering waterfalls or fountains
Transferring water from unwanted place
Tips:
If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port. The bigger the flow is, the wider the outlet should be
Before starting, tilt the pump to remove all air and wait for 15 seconds
If the water level is not enough height for float switch freely floating, you can use float buckle mode, pump can still work, which means manual operation
About FLUENT TOOLS was founded in 2008 with the goal of creating user-friendly and energy saving products. We are professional manufacturer of garden water pump. Our customers include Tool retailer companies, supermarket, and DIY stores
7. CoolDi 12v Auto Inflatable Pumps Electric Tire Inflater Mini Portable Car Air Compressor (260psi)
Feature
CONVENIENT: This air compressor is powered by cigarette lighter / DC 12V,ideal for inflating tires, balls, rubber floater, hovercraft and so on. It is compact, portable and easy to use. FAST: 260PSI, inflates ordinary car tire about 5 minutes (>30PSI)SIMPLE: Once pressed the switch, it will work automatically with low noise. Compact and portable, easy to use.
MULTIFUNCTION: Provide pressure gauge and 3 nozzle adapters.
MULTI-PURPOSE: Ideal for inflating tires, rubber floater, hovercraft etc.
Description
Specifications:PSI: 260
Voltage: DC12V
Power: 120~150W
Material: Metal & plastic
Length of power plug: 9.2ft
Length of air tube: 19.7in
Item diameter: 7.1in
Item height: 2.8in
Item weight: 1.7lb
Package size: 7.5*7.3*3.6in
Package weight: 1.89lb
Package includes:
1 x Air Compressor
3 x Nozzle Adapter
8. MD Sports BBG019_067M 4 in 1 Junior Basketball Game (Basketball, Soccer, Boxing & Knee Hockey), Blue
Feature
Features 4 different games- basketball, Soccer, Boxing and knee hockeyLED electronic scoring System with 8 different modes for basketball game
Convenient fold-up design for safe, easy storage
Sturdy .75 inch metal frame and durable 7.75 inch rims
Includes 3 basketballs, 1 air pump, 1 Soccer, 2 hockey pucks, 2 hockey sticks, 1 speed bag
Description
Bring arcade-style hoop home with the MD Sports 4-in-1 Basketball game. We design our sports equipment for all players to enjoy. Whether you're just starting to learn how to play Basketball, soccer, Hockey, or boxing, anyone can join in the fun and competition. The hoop is ideal for birthday parties, graduations, family get-togethers, Holidays, or simply just for fun! 4 sports in 1 - accessories included once you've Got your hoops Fix, quickly switch to soccer, Hockey or boxing. The MD Sports 4 in 1 junior Basketball game easily converts from a court, to soccer or Hockey goal, as well as a boxing setup, extending the fun for everyone. Practice your penalty kicks, slap shots, and right hook with quick switches between games. The best part is that all of the accessories need to play each game are included! 8 game modes for Basketball once you've Got your shot and form down, put your skills to the test with eight different game modes. Each game is designed to test your reactions and accuracy during play. Games include horse, beat the clock, battle back, around the world, one on one, 3 point beat the clock, check point, and left/right shoot out in either one person or two person games. Master each game and square off against friends to see who reigns supreme. Space saving storage the MD Sports 4 in 1 junior Basketball game is designed for easy storage. The game can easily be moved and stored in your closet or under your bed.9. daffodilblob Air Compressor, 260 PSI Motors Automotive Tool Car Pump Portable Tire Inflator Air Compressor
Feature
Ideal for inflating tires, rubber floater, hovercraft etc.260 PSI, inflates ordinary car tire about 5 minutes(>30PSI).
Size: 18cm x 18cm x 7cm/7.09
Compact and portable, easy to use.Provide pressure gauge and 3 nozzle adapters.
Powered by cigarette lighter/DC 12V, once pressed the switch, it will work automatically with low noise.
Description
Type: Air Compressor
Material: Metal, Plastic
Voltage: DC 12V
PSI: 260
Length of Power Plug: 2.3m/90.55" (Approx.)
Length of Air Tube: 40cm/15.75" (Approx.)
cigarette Adapter ports mobile phones tablet Automotive Parts Interior Fittings Mobile DC Outlet 6.8A 4 Ports Multi-Function Power Universal Portable Auto Air Compressor Electric Tire Inflator Pump Tool
Note:
1. Due to the light and screen settings, the color of the item may be slightly different from the pictures.
2. Please allow slight dimensional difference due to the different manual measurement.
3. If you have any questions, please feel free to contact us, I will be happy to solve your problem and provide top quality service!
Package Included:
1 x Air Compressor
1 x Cigar Lighter
3 x Nozzle Adapters
10. Air Conditioning Condensate Removal Pump with Safety Switch and Alarm 20 Lift
Feature
Part number PCP115Siwtch is Normally Open (NO)
Buzzer switch will close when 2-3/4 water collects in the tank, to activate the audible alarm. The 80 decibel alarm functions together with the safety switch.
Maximum Work Lift 20 GPH at 20 FT ,115 Volt, 60 Hz, 1.5A, 1/10hp
Description
Part number PCP115.Siwtch is Normally Open (NO).
Buzzer switch will close when 2-3/4 water collects in the tank, to activate the audible alarm. The 80 decibel alarm functions together with the safety switch.
Maximum Work Lift 20 GPH at 20 FT
115 Volt, 60 Hz, 1.5A, 1/10hp
Thermally protected motor.
Open/Close rubber ball check valve.
Integrated Safety Switch.
Vibration absorbing rubber feet.
Specially designed leak-free motor and safety floater.
1/2 Gallon water tank.
1-1/8" hole for the inlet
6 ft power cord.
Recent Comments