Top 10 ec and ph meter for 2019
If you looking for ec and ph meter then you are right place. We are searching for the best ec and ph meter on the market and analyze these products to provide you the best choice.
Best ec and ph meter
1. Bluelab 716441 Combo Meter for Plant Germination
Feature
Measures pH, temperature and EC, ppm 500, ppm 700 and CFLightweight and portable.Probe cable length: 6.5 feet
Successful pH calibration indicator
Replaceable Double Junction pH Probe included
Auto off function. Please see page 3 onwards for set up info, see page 12 for troubleshooting in the user manual attached in the catalog below.
Description
Bluelab Combo Meter
The Bluelab Combo Meter is a portable Meter that takes measurements of pH, conductivity and temperature within a solution. The correct pH, conductivity and temperature levels of a nutrient solution is critical for healthy successful growth. If you are experiencing problems with yellow leaves, or slow stunted growth, the Bluelab Combo Meter will soon tell you if each parameter is within the plants requirements. Adjustments can be quickly made to get your crop back on track.
Features
- Measures pH, conductivity(EC, CF, ppm 500 and ppm 700)and temperature(C,F)
- Lightweight and portable
- Large easy to read display
- Simple push button pH calibration
- Successful pH calibration indicator
- No calibration required for conductivity and temperature
- Replaceable double junction pH probe included
- Over range and under range indicators
- Low battery indicator
- 2 x AAA alkaline batteries included
- Auto off function
It's all you need for simple and reliable crop management
The Bluelab Combo Meter has two probes, a Bluelab pH Probe and a Bluelab Conductivity / Temperature Probe. The Conductivity / Temperature probe is permanently fitted to the Meter, whereas the pH probe is replaceable. This is due to the fact that pH probes have a limited life and age through normal use. Replacement pH probes can be purchased separately.
You can also connect a Bluelab Soil pH Probe to the Combo Meter to take direct pH soil measurements or measure the pH of a soil solution. The soil pH probe can also measure solutions. Bluelab Soil pH Probes can be purchased separately. Both probes require cleaning at least once a month and it is recommended to use the Bluelab pH and Conductivity Care kits. These care kits are made specifically for Bluelab instruments to increase probe life and ensure you are always receiving accurate readings.
The simplest Meter in it's class
When taking a reading, simply place both probes into the solution and the selected reading is displayed on screen. Both probes may be fully submerged into the solution. As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anywhere, anytime to help you manage your crops daily nutrient requirements.
Calibration of the pH probe is simple and the instructions are supplied on the back of the meter. The push button calibration method makes this one of the simplest meters to use. Successful pH calibration indicators on the screen guide you through so you know the reading is reliable. After 30 days the calibration indicators will disappear, letting you know calibration is due. The Conductivity / Temperature probe does not require calibration as this is locked in during manufacture.
2. Apera Instruments PC60 Premium 5-in-1 Waterproof pH/Conductivity/TDS/Salinity/Temp. Multi-Parameter Pocket Tester, Replaceable Probe
Feature
Simultaneously tests pH/EC/TDS/Salinity/Temp. in a quick,accurate, and reliable mannerEASY-TO-INSTALL Replaceable Multi-parameter Probe with EASY measuring mode switch
Auto recognition of stable values (with optional AUTO HOLD function) improves consistency so you don't have to guess when to manually hold measurement
LARGE CLEAR viewing angle screen with 3 backlit color (indicating 3 different modes), dual display of temp./pH/EC/TDS/Salinity, and indications of completed calibrations and stable readings
COMPLETE KIT with READY-TO-USE calibration solutions, calibration bottles, storage solutions, AAA batteries, and a lanyard all in a portable carrying case
Description
The Apera Instruments PC60 Multi-parameter Tester simply tests pH, EC, TDS, Salinity &Temperature in an ACCURATE, QUICK & Professional manner for all kinds of regular water solutions such as hydroponics, aquaculture, pools& spas, tap/drinking water, water treatment, cooling towers, etc. The multi-parameter probe is replaceable.
1 to 3 points of Auto Calibration and 0 to 50C Auto Temperature Compensation (ATC), 0.01 pH, 1% F.S, 0.5C accuracy with -2.00 to 16.00 pH & 0 to 20.00 mS/cm measuring range, auto recognition and reminders of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement (auto hold function available).
Easy menu setting, customizing your testers functions according to your needs. Smart self-diagnosis, warning of out-of-range measurement and incorrect calibrations. IP67 waterproof and dustproof, floating on water so you dont have to worry if it falls into water by accident. Up to 2000 hours' continuous operation (without backlit) powered by AAA batteries (with low power warning and auto power off in 8 min if no operation).
Comes with a complete kit of premixed calibration solutions (4.00 and 7.00), soaking solutions (3M KCL), calibration bottles, AAA batteries, and a lanyard all in a portable carrying case.
The meter is CE certified and comes with a 2-YEAR Warranty (6 months for the probe). The company designs and manufactures scientific analytical instruments like meters and sensors for pH, conductivity, turbidity, and dissolved oxygen for over 25 years, and meets ISO 9001:2008 Standards.
NOTES: The instrument will NOT give accurate or stable readings for distilled or deionized water's pH testing (conductivity testing works well in distilled water). This is because distilled and deionized water do not have enough ions present for the electrode to function properly in pH measuring. To measure distilled or deionized waters pH, users need to use a specialized pH electrode. Do NOT store the probe in distilled water or deionized water because they will cause damage to the glass membrane of the pH probe. Only use distilled water for cleaning the pH probe.
3. Water Quality Test Meter Pancellent TDS PH EC Temperature 4 in 1 Set
Feature
[ Convenience Use ] 5 Seconds know water quality, Accuracy, Faster. This set Combo of TDS PH EC Temperature. Also it have Best Price, Trustable Quality, all make it be your FIRST water quality Test.[ How Accuracy? ] PH resolution is 0.01pH,accuracy 0.05pH.TDS:0~9990ppm,Conducitivity:0~9990us/cm,Accuracy:2%.This's same as big brand resolution in Amazon, but Pancellent test only need half price of them.
[ Lasted Model ] PH pen have AUTO CALIBRATION function, not need any kind of screwdrivers to calibrate the pH pen tester.TDS pen have Lock & auto shut off function.
[ Pocket Portable ] Small size but Suitable for testing pH balance of drinking water, pool, aquarium, RO system, Spa, or hydroponics.
[ Money Back Guarantee ] Pancellent (Plan of excellent) to provide 30 days Money Back Guarantee and 120 days Replacement Service.
Description
Little Money to Know Water QualityThe Pancellent TDS EC PH Meter set is a professional level water test meter.
Application: pure water production and drinking, tap water, well water, sea water, fish tank water,
swimming pool water, amniotic fluid early break, soil, aquaculture, food processing, saliva,
enzyme, chemical experiment, ionized water, PH value of human urine and so on.
PH Meter Specifications:
Measure Range : 0.00 - 14.00 pH
Resolution : 0.01 pH
Accuracy : 0.01 pH
Automatic Temperature Compensation : 0 - 60 / 32 - 140
Calibration : Two Points Automatic Calibration Button
Button battery: 2 x 1.5V LR44(keep using more than 500 hours)
Dimension:155mm*31mm*18mm
Weight:50g
TDS EC Temperature Meter Specifications:
Lock function - makes it easy to read and record, press HOLD button then remove from test solution.
4 Display modes: press SHIFT button: TDS - ppm & C, EC - s/cm & C, TDS - ppm & F, EC - s/cm & F.
5 minute Auto Shut Off feature, so battery won't run down.
Measurement Range: Conductivity: 0 - 9990 s/cm TDS: 0 - 9990 ppm (parts per million) Degrees
Celsius: 0.1 - 80.0C, Fahrenheit: 32.0 - 176.0F
Accuracy: 2%
Net weight: 55g
Size: 154 x 30 x 14 mm
Tips:TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water.
Package Includes:
1 x PH Meter
1 x TDS EC Temperature Meter
2 x Calibration packets
2 x User's manual
About Pancellent:
Pancellent was a registered brand in United States and European Union. It mean plan of excellent.
We are doing our best to providing each customer with the highest standard of customer service.
All our product have 30 days Money Back Guarantee and 120 days Replacement Service.
4. Hanna Combo pH/EC/TDS/C/PPM Tester HI98129
Feature
Automatic calibration at one or two points with two sets of memorized buffer values for ease of useReplaceable electrodes to prolong life of meter
Automatic temperature compensation (ATC) eliminates need for extra calculations
Waterproof and floats in water
Automatic shut-off to extend battery life
Description
The Hanna Instruments HI 98129 is a multi-parameter tester that measures pH, electro-conductivity (EC), total dissolved solids (TDS), and temperature, and features automatic temperature compensation (ATC), an LCD screen, automatic shut-off, and a waterproof body that floats in water. The tester automatically compensates for the effects of temperature when taking pH and EC/TDS readings, so additional measurements and manual temperature entries are unnecessary.
The HI 98129 meter has a replaceable pH electrode with an extendable cloth junction, and an EC/TDS graphite electrode that is resistant to salts and other corrosives. These features extend the life of the meter by allowing for replacement of the electrodes. Calibration is automatic at one or two points, with two sets of memorized buffer values (pH 4.01/7.01/10.01 or 4.01/6.86/9.18). The EC/TDS conversion factor and temperature compensation coefficient (&Beta) is user-selectable.
The tester functions in temperatures of 0.0 to 60.0 degrees C/32.0 to 140.0 degrees F (+ or - 0.5 degrees C/1 degree F), and has a range of pH 0.0 to 14.0 (+ or - 0.05 pH). EC range is 0 to 3999 uS/cm, TDS range is 0 to 2000 ppm (+ or - 2% F.S), with respective resolutions 1 uS/cm and 1 ppm. At 3.5 ounces and 8.3 x 2.7 x 1.3 inches (H x W x D), the HI 98129 is sized for taking measurements in the field. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)
pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists.
Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards.
Whats in the Box?
- HI 98129 meter
- Protective cap
- Electrode removal tool
- Four 1.5V batteries
- Instructions
5. Hanna Instruments HI 9813-6N Waterproof pH/EC/TDS Temperature Meter Clean and Calibration Check for Growers, 0 to 50 Degree C, 9V Battery
Feature
Starter set with portable, water-resistant meter for testing pH, electroconductivity, and total dissolved solids, provided with solutions and sachetsCalibration check function to validate instrument performance
Automatic temperature compensation (ATC) to eliminate the need for extra calculations
Alert system when low battery and potential measurement error
On-screen user and calibration guides
Description
The HI 9813-6N waterproof multiparameter meter measures pH, electroconductivity (EC), and total dissolved solids (TDS), making it suitable for designed specifically for agricultural applications such as hydroponics, greenhouses, farming and nurseries. The HI 9813-6N comes with a HI 1285-6 combination probe with DIN connector and 1 m/3.3 ft. cable, a starter set of calibration and cleaning solution sachets, a check solution sachet, a 9V battery and instructions. The attached HI 1285-6 polyprolylene probe features a fiber junction and gel electrolyte.
The meter has a calibration check function (Cal-Check) to validate instrument performance and an LCD screen. If the meter is calibrated, a message will indicate Probe is OK, but if the meter needs cleaning the device will direct the user to Clean Probe and Calibrate.
The HI 9813-6N tester functions in temperatures of 0.0 to 60.0 degrees C, and has a range of pH 0.0 to 14.0 (+ or - 0.1 pH) with a resolution of 0.1 pH. For EC, the device has a range of 0.00 to 4.00 mS/cm (+ or - 2% F.S. mS/cm) and a resolution of 0.01 mS/cm. For TDS, the device has a range of 0 to 1999 ppm (mg/L) (+ or - 2% F.S. ppm) and a resolution of 1 ppm (mg/L). Dimensions are 144.6 x 79.5 x 37 mm/5.7 x 3.1 x 1.5 inches (H x W x D) with a weight of 230 g (8.1 oz.). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)
pH meters and testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agricultural, wine-making and water-testing and for scientific applications.
Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards.
Whats in the Box?
- HI 9813-6N meter
- HI 1285-6 combination probe with DIN connector and 1 m/3.3 ft cable
- HI 70007 pH 7.01 calibration solution (20 mL)
- HI 70442 1500 ppm (mg/L) calibration solution (20 mL)
- HI 70031 1413 S/cm calibration solution (20 mL)
- Two HI 700521 cleaning solution sachets (20 mL)
- Carrying case
- (1) 9V battery
- Instructions
6. pH EC Temperature Meter Waterproof Water Quality Tester Monitor Pen Type Acidometer Drink Water Quality Multi-Parameter, hydroponics, pools, spa (Pen Type EC PH meter)
Feature
PH & EC 2-in-1 with single press to switchReplaceable Electrode probe with ATC function
3-points pH calibration (9.18pH, 6.86pH,4.01pH)
Temperature shows simultaneously, with switchable unit (C / F)
Easy to carry and simple to operate
Description
Highly accurate meter for testing PH/EC/TEMP of solution level with 3-points calibration!
Application Usage:
Best choice for a variety of applications like spas, swimming pools, aquarium, hydroponics and other water systems, beverage, fish hatcheries, food processing, aquarium, photography, laboratory, quality control, school & colleges, swimming pools, water conditions.
Features:
Electrode probe can be replaced, ATC function
Measure pH, EC, TEMP solution
Automatic temperature compensation
3-points pH calibration (4.01pH, 6.86pH, 9.18pH)
Test temperature in degrees / Fahrenheit (switchable unit)
Easy to carry and simple to operate
Easy calibration of pH and EC with just a mini-screwdriver
Large and clear LCD with backlight, easy to read and accurately measuring functions
Specifications
Range:
pH: 0.00 ~ 14.00p
EC: 0.00 ~ 19990us/ms
Temperature: -50~70C (-58 ~158F)
Resolution:
pH: 0.01pH
EC: 10us/ms
Temperature: 0.1C (0.2F)
Accuracy:
pH: 0.1pH
EC: 2%F.S.
Temperature: 1C (2F)
Temperature Compensation: 0~50C (32 ~ 122F)
Working Temperature: 0~50C (32 ~122F)
Power Supply: 41.5V AG-13 Button Cell Batteries
Material: AB
Item Size: Approx. 188 x 35 x 35mm
Item Weight: Approx. 80g
Set includes:
1 x pH EC Temperature Meter
3 x Calibration Buffer Powder (pH 4.01 , pH6.86 and pH9.18)
1 x User Manual
1 x Mini Screwdriver
7. Pancellent Water Quality Test Meter TDS PH 2 in 1 Kit 0-9990 PPM Measurement Range 1 PPM Resolution 2% Readout Accuracy
Feature
[ Convenience Use ] 5 Seconds know water quality, Accuracy, Faster. This set Combo of TDS PH. Also it have Best Price, Trustable Quality, all make it be your choose of water quality Test.[ How Accuracy? ] PH resolution is 0.01pH,accuracy 0.01pH.TDS:0~9990 ppm, Accuracy:2%.This's same as big brand resolution in Amazon, but Pancellent tester only need half price of them.
[ Lasted Model ] PH pen have AUTO CALIBRATION function, not need any kind of screwdrivers to calibrate the pH pen tester.TDS pen have Lock & auto shut off function.
[ Pocket Portable ] Small size but Suitable for testing pH balance of drinking water, pool, aquarium, RO system, Spa, or hydroponics.
[ Money Back Guarantee ] Pancellent (Plan of excellent) to provide 30 days Money Back Guarantee and 120 days Replacement Service.
Description
Little Money to Know Water QualityThe Pancellent TDS PH Meter set is a professional level water test meter.
Application: pure water production and drinking, tap water, well water, sea water, fish tank water,
swimming pool water, amniotic fluid early break, soil, aquaculture, food processing, saliva,
enzyme, chemical experiment, ionized water, PH value of human urine and so on.
PH Meter Specifications:
Measure Range : 0.00 - 14.00 pH
Resolution : 0.01 pH
Accuracy : 0.01 pH
Automatic Temperature Compensation : 0 - 60 / 32 - 140
Calibration : Two Points Automatic Calibration Button
Button battery: 2 x 1.5V LR44(keep using more than 500 hours)
Dimension:155 x 31 x 18 mm
Weight:50g
TDS Meter Specifications:
Lock function - makes it easy to read and record, press HOLD button then remove from test solution.
5 minute Auto Shut Off feature, so battery won't run down.
Measurement Range: TDS: 0 - 9990 ppm (parts per million)
Accuracy: 2%
Automatic temperature compensation: can automatically change the value of the value of 25 .
Working temperature: 0 ~ 50
Ambient relative humidity: <85%
Net weight: 28g
Size: 142 x 23 x 13 mm
Tips:TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water.
Package Includes:
1 x PH Meter
1 x TDS Meter
2 x Calibration packets
2 x User's manual
About Pancellent:
Pancellent was a registered brand in United States and European Union. It mean plan of excellent.
We are doing our best to providing each customer with the highest standard of customer service.
All our product have 30 days Money Back Guarantee and 120 days Replacement Service.
8. Water Quality Tester, Accurate and Reliable, HoneForest TDS Meter, EC Meter & Temperature Meter 3 in 1, 0-9990ppm, Ideal Water Test Meter for Drinking Water, Aquariums, etc.
Feature
ACCURATE AND RELIABLE: To achieve high accuracy, equipped with premium quality titanium alloy probe, and reliable Automatic Temperature Compensation (ATC) ensures reading always be accurate at various temperatures.MULTIFUNCTIONAL AND UPGRADED: Professional TDS, EC and Temperature Pen 3 in 1. Upgraded with big backlit LCD for easier reading, and auto-lock function for easier use.
EASY AND INSTANTLY: Just turn TDS meter on and stir water gently, then stabilized readings will be auto-locked on LCD in seconds, and the tds ppm meter will shut off automatically if without operation over 2 minutes.
MULTIPURPOSE TDS TESTER: Test drinking water purity to ensure it's healthy, monitor if Reverse Osmosis (RO)/DI System works properly, whether filter need replaced, maintenance aquarium, hydroponics(test nutrients), pool and spa, etc.
3 YEARS WARRANTY. And we offer 90 days Money Back Guarantee if not totally happy with the digital TDS water tester meter.
Description
Super accurate, reliable and easy to use TDS, EC &Temp water tester reader, with backlit and auto-lock function, 3 years warranty and 90 days money back guarantee.
This advanced digital ppm meter pen with Advanced Microprocessor Technology, combines TDS Meter(Total Dissolved Solids), EC Meter(Electrical Conductivity) and Temperature meter all in one ergonomically designed pen.
Widely be used for all Water Quality Testing, Water Purification Applications, Aquaculture, Hydroponic, Pool & Spa, Colloidal Silver, Water Treatment and more.
It's a must have handy tool for every household, testing for tap water, filtered water, distilled water, bottled water, well water, refrigerated water, etc.
Features:
* Automatic Temperature Compensation(ATC)
* Equipped with backlit LCD for easy reading.
If TDS40, the backlit color is green,
If TDS>40, the backlit color is red.
* Auto-Lock Function: From test beginning, the reading can be stabilized in seconds, and locked automatically for easy read and record.
* Hold Function: Before reading locked automatically, the reading can be locked manually if press "HOLD".
* Factory Calibrated: No need calibration by user.
* Auto-Off in 2 Minutes to conserve battery.
* A colorful TDS chart on the back to explains ppm readings.
* Includes a protective carrying case with belt clip, easy to carry.
Specifications:
* Measuring Range:
TDS: 0 - 9990 ppm (parts per million)
Conductivity: 0 - 9990 s/cm
Degrees Celsius: 0.1 - 50.0C
Fahrenheit: 32.0 - 122.0F
* Accuracy: 2% F.S
* Net Weight:1.62oz(46g)
* Size:6.29 x 1.14 x 0.59 inches (160x29x15mm)
Package Including:
1x TDS Meter
1x HoneForest Instruction
1x portable leather bag
1x HoneForest color box
9. Dr.meter PH100-V 0.01 Resolution High Accuracy Pocket Size pH Meter with ATC, 0-14pH Measurement Range
Feature
Great for laboratory PH testing applications including aquariums, swimming poolsMeasurement range of 0-14 PH - highly accurate, reliable and quick readings
Comes with carrying case; lightweight, handheld design for portability and convenience
Display PH value and temperature simultaneously
Reliable and friendly customer service: ready to respond within a 24 hour time lifetime support
Description
Dr.meter - Ultimate Measure for Accuracy The Dr.Meter pH-100 is a handheld, accurate pH meter that measures pH value of water or solution. It has been widely used in the realm of hydroponics, education, water treatment, and swimming pools. This meter has ATC(automatic temperature compensation) for accurate readings in fluctuating temperatures. Specifications: Measuring range: 0-14 pH Resolution: 0.01 Batteries: 4x 1.5V LR44 button cell (AG13) Working temperature: 0-50C (32-122F) Weight: 88gPackage includes:1 x pH Meter 1 x Carrying case 6 x Calibration packet 1 x User manual 1 x Warranty card 4 x button cell 1 x Warranty card Warranty: 30 Days Money Back; 12 Month Free Exchange10. Water Quality Test Meter Pancellent TDS PH EC Temperature 4 in 1 Kit (Blue)
Feature
[ Convenience Use ] 5 Seconds know water quality, Accuracy, Faster. This set Combo of TDS PH EC Temperature. Also it have Best Price, Trustable Quality, all make it be your FIRST water quality Test.[ How Accuracy? ] PH resolution is 0.01pH,accuracy 0.01pH.TDS:0~9990ppm,Conducitivity:0~9990us/cm,Accuracy:2%.This's same as big brand resolution in Amazon, but Pancellent test only need half price of them.
[ Lasted Model ] PH pen have AUTO CALIBRATION function, not need any kind of screwdrivers to calibrate the pH pen tester.TDS pen have Lock & auto shut off function.
[ Pocket Portable ] Small size but Suitable for testing pH balance of drinking water, pool, aquarium, RO system, Spa, or hydroponics.
[ Money Back Guarantee ] Pancellent (Plan of excellent) to provide 30 days Money Back Guarantee and 120 days Replacement Service.
Recent Comments