Best table saw zero for 2019
Finding your suitable table saw zero is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best table saw zero including detail information and customer reviews. Let’s find out which is your favorite one.
Best table saw zero
1. LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert
Feature
15-1/8" x 3-3/4" x 1/8"Fits RIDGID R4512 Professional Table Saw
Zero-Clearance blade insert with riving knife slot
Durable phelnolic construction
Coated surface for friction free operation
Description
LEECRAFT Model RG-5 fits Home Depot's RIDGID R4512 Professional Table Saw. Zero-Clearance insert for single blades and includes a riving knife slot.2. Leecraft DW-3 Zero-Clearance Dado Table Saw Insert for Dewalt Saws (Colors May Vary)
Feature
Fits DeWalt: DW744, DW745, DW746, DeWalt, DWE7480, DWE7490X, DWE7491RS, DWE7499GD Table SawsInsert is cut with dado blade or regular blade to create a perfectly matched insert.
Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
Measures: 13-9/16" x 3-3/4" x 29/64" (Please measure before ordering) instructions included
Factory splitter/guard incompatible with DW-3 insert and will need to be lowered or removed
Description
Leecraft model DW-3 fits DeWalt: DW744 & DW745 (factory splitter/guard incompatible with DW-3 insert on these saws); DW746 & DeWalt DWE7480, DWE7490X, DWE7491RS, DWE7499GD. LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. Complete with instructions. Insert surface colors may vary. Insert is the same design as Leecraft's DW-2 with the only change being more material is removed from the bottom.
3. Delta Uni-Saw Contractor Large Grizzly Phenolic Zero Clearance Insert for Table Saws 13-3/8 x 3-3/4 x 1/2
Feature
Insert Dimensions: 13-3/8" x 3-3/4" x 1/2". Actual Color May VaryMade from high-density phenolic laminate with a bonded-melamine surface
Delta Uni-Saw/Contractor/Large Grizzly insert fits various models of table saws.
Includes leveling screws, side and end adjustment screws; rear safety tab; pre-cut blade bottom pocket
Please check your Length,Width and Thickness of your current insert before ordering
Description
Replace your factory table saw insert with a phenolic zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard carbide tipped saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts. Actual Color May Vary.4. Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
Feature
Elimantes dangerous gap around blade where thin off-cuts can get wedgedFits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Description
LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. This 1/2" thick insert is precision machined from a nearly frictionless melamine faced, high density phenolic laminate. It offers durability and flatness unobtainable from cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen. Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Craftsman insert measures 14" x 3-3/4" and fits most new, 10" belt drive models. (Check the opening of your Sears saw before ordering). Complete with instructions. Insert surface colors may vary.5. Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
Feature
Fits: Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor, Grizzly G1023, Jet CTAS-10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685Measures: 13-3/8" x 3-3/4" x 1/2" (Please measure before ordering)
Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
Elimantes dangerous gap around blade where thin off-cuts can get wedged
Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
Description
LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.6. Leecraft BH-1 Zero Clearance Table Saw Insert for 4000 and 4100 Table Saw (Colors may Vary)
Feature
Installation instructions includedPrecision machined from melamine faced, high-density phenolic laminate
Leecraft Model #BH-1
Fits 4100/4000 series jobsite table saws 13-9/16" x 3-3/4" x 7/16" thick w/o riving knife slot
Description
Leecraft model BH-1 fits 4100 & 4000 table saws. LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. Complete with instructions. Insert surface colors may vary.7. Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
Feature
Table saw insert for eWalt DW744 and DW746Significantly reduces saw noise, dust, chip-out, and splintering
Constructed of high-density phenolic laminate with a bonded-melamine surface
User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket
Measures 13-5/8-by-3-3/4 inches (LxW)
Description
Leecraft model DW-2 fits DeWalt: DW744 & DW745 (factory splitter/guard incompatible with DW-2 insert on these saws); DW746 & DeWalt DWE7480, DWE7490X, DWE7491RS, DWE7499GD. LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. Complete with instructions. Insert surface colors may vary.8. LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert
Feature
15-1/8" x 3-3/4" x 1/8"Fits RIDGID R4512 Professional Table Saw
Zero-Clearance dado insert with no riving knife slot
Durable phenolic construction
Coated surface for friction free operation
Description
LEECRAFT Model RG-6 fits Home Depot's RIDGID R4512 Professional Table Saw. This insert is for dados with no riving knife slot.9. Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw
Feature
Table saw insert supports work right up to the blade for smooth, more precise cutsOffers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
Made from high-density phenolic laminate with a bonded-melamine surface
Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only
Description
LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate. Offer durability and flatness unobtainable from cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen. Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.10. SKILSAW SPTA70WT-ZC Zero Clearance Insert
Feature
Exclusively designed for the SPT70WT Portable Worm Drive Table SawFor precision cuts at 90 degrees
Reduces kerf clearance to thickness of the blade
Includes needed hardware for attaching insert to the saw
Recent Comments