Which are the best v6 block available in 2019?
We spent many hours on research to finding v6 block, reading product features, product specifications for this guide. For those of you who wish to the best v6 block, you should not miss this article. v6 block coming in a variety of types but also different price range. The following is the top 8 v6 block by our suggestions:
Best v6 block
1. Genuine E3D Block & Sock V6 Upgrade Kit (V6-BLOCK-SOCK-KIT)
Feature
Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge BlockDescription
Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Thermistor Cartridge Block. V6 cartridge heater block, V6 Silicone Sock Original x3, The new cartridge Thermistor, Thermistor cable Fixings, and applicable wrenches/screws included.2. Zomiee 5pcs Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Heads M6 Threaded + 5pcs Aluminum Heater Block Extruder Kit for E3D V6 3D Printer 1.75mm Extruder Hot End
Feature
[Nozzle] - 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 7*12mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.[E3D-V6 Aluminum Heater Block] - Dimensions: 20*16*12mm(L*W*H); Material: Aluminum.
[Throat Tube] - Filament Diameter - 1.75mm; Material - Stainless Steel.
[Combine Pack] - 5pcs Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Head + 5pcs Aluminum Heater Block
Description
Specification of Brass Nozzle:Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 7*12mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Filament Diameter : 1.75mm
Material : Stainless Steel
Specification of Aluminum Heater Block:
Material: Aluminum
Dimensions: 20*16*12mm(L*W*H)
Inner hole for install screw: M6 and M3 (heat pipe and thermocouple)
Package:
5 x E3D-V6 0.4mm Brass Nozzle
5 x Extruder 1.75mm Tube
5 x E3D-V6 Aluminum Heater Block
3. Genuine E3D v6 Plated Copper Heater Block (V6-BLOCK-CARTRIDGE-COPPER)
Feature
Genuine E3D Parts1 - V6 Plated Copper Heater Block per Order
Resistant to temperatures beyond 500C
Or swap to a Type-K Thermistor cartridge, instead of a thermistor
These heater blocks are extremely similar to the standard E3D-v6 heater block
Description
These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminum blocks which begin to lose integrity beyond 350C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300C where a silicone sock can't be used.
Use these blocks with our plated copper nozzles for the ultimate extrusion pairing!
Why Copper?
Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. A small side effect is that the copper's higher thermal conductivity will also slightly increase your heat-up times, but it can provide tighter temperature control as well.
This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500C. It's perfect for the high-temperature printing that aluminium heater blocks can't handle.
Product Specs
Copper-alloy heater block with nickel plating
Resistant to temperatures beyond 500C
Laser-engraved with E3D logo
Very shiny
non-stick surface, to repel filament without a silicone sock
Compatible with sensor cartridges and silicone socks.
Supplied with an M3 Grub screw to secure the PT100, and an M3 Socket Screw to clamp the heater cartridge.
4. KINGPRINT Aluminum Heat Block for 3D V6 J head 3D Printer Specialized for MK7 MK8 3D Printer Extruder (Pack of 5pcs)
Feature
-Made of solid aluminum material, durable in use-It works perfect with nozzle and nozzle throat
Inner hole for heater tube: 6mm
Inner hole for thermocouple/thermistor: 3mm
Dimension:15*15*10mm
Description
SpecificationsPlate thickness: 1.0mm-10mm
Material Capabilities: Aluminum
output power: 15w(Max)
Size: 16*16*12MM
Package Included:
5*Aluminum Heater Block
5. 15pc/set Aluminum Heater Blocks Hotend + 0.4mm Brass Extruder Nozzle Print Heads + 1.75mm Teflon Throat Tube for E3D V6 3D Printer
Feature
Extruder Brass Nozzle Print Head: Size:7x12mm , Input Diameter: 1.75mm , Output Diameter: 0.4mmTeflon Throat Tube : Material : Stainless Steel , Filament Diameter : 1.75mm
Description
Package Contents:5 x 0.4mm Brass Nozzle
5 x Extruder 1.75mm Tube
5 x Heater Blocks Hotend
6. Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)
Feature
Genuine E3D PartsONLY works for HotEnds which use the E3D V6 style heater block
3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds
These socks will keep your nozzle clean
These socks really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles
Description
A pack of 3 original high temperature non-stick silicone socks for E3D V6 and other HotEnds also using the E3D V6 style heater block with thermistor cartridges.
Not sure about this design? E3D is confident that the new-style socks will suit almost all customers, but E3D kept this design available for specific use-cases. In particular, these socks may be preferable in set-ups where keeping the heater block AND nozzle fully insulated are desirable. We recommend using these socks with our 0.15mm nozzles.
These socks will keep your nozzle clean and free of burnt on blackened plastic. They don't just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm.
These v6 socks are a pack of 3 because they don't last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With materials like ABS and gentler use you can get almost infinite life. Mileage may vary.
7. Genuine E3D V6 Heater Block for Sensor Cartridges (V6-BLOCK-CARTRIDGE-ALU)
Feature
Genuine E3D PartsThis heater block works with our New Standard thermistor sensor for V6
Easily swap to use our high temperature, high accuracyPT100 temperature sensors on your E3D-v6 HotEnd
Or swap to a Type-K Thermistor cartridge, instead of a thermistor
These heater blocks are extremely similar to the standard E3D-v6 heater block
Description
This heater block works with our New Standard thermistor sensor for V6... Along with the other E3D temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracyPT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a thermistor.
These heater blocks are extremely similar to the standard E3D-v6 heater block, but instead of a hole sized for a thermistor with a clamping washer these blocks have a hole sized for the PT100 sensor, and use an M3 grub screw to quickly and easily secure or release the sensor.
Supplied with an M3 Grub screw to secure the PT100, and an M3 Socket Screw to clamp the heater cartridge.
8. Zzanggu V6 Heater Block(5pcs) Aluminum Heat Block Specialized for MK7 MK8 3D Printer Extruder
Feature
Size of Heater Block20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/thermistor: 3mmHigh Quality Material Made of solid aluminum material with sandblasting oxidation treatment, durable in use
Inner Hole Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Nozzle Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat
Application Accept Nozzle with M6 screw thread for Reprap V6 3D printer heating block
Description
Zzanggu 5pcs Aluminum V6 Heater Block, Specialized for MK7 MK8 3D Printer ExtruderSpecifications
[Type] V6 Heater Block
[Material] Aluminum Alloy
[Size] 20*16*12mm
[Inner Hole for Heater Tube] 6mm
[Surface Treatment] Sandblasting Oxidation
Features
[1] Inner hole for thermocouple/thermistor: 3mm
[2] Inner hole for set screwM3
[3] It works perfect with nozzle and nozzle throat
[4] Suitable for V6 nozzle (M6 Screw)
TIPS
In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.
Packaging Includes
1x V6 Aluminum Heater
Recent Comments