Where to find solenoid valve b2015-s85?
When you want to find solenoid valve b2015-s85, you may need to consider between many choices. Finding the best solenoid valve b2015-s85 is not an easy task. In this post, we create a very short list about top 10 the best solenoid valve b2015-s85 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 solenoid valve b2015-s85:
Best solenoid valve b2015-s85
1. Replacement 4040 Humidifier Valve for Aprilaire Solenoid Valve, Part No. B2015-S85 | 24 Volts | 2.3 Watts | 60 HZ By: Eagleggo
Feature
The 4040 by Eagleggo is a replacement humidifier solenoid valve.For Aprilaire Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
2. Humidifier Water Valve for Aprilaire 4040 Solenoid Valve 24 Volt Humidifier Models 400, 500, 600, 700, Part No. B2015-S85
Feature
The 4040 by Eagleggo is a replacement humidifier solenoid valve.For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
3. 4040 Replacement Humidifier Valve for Whole House Humidifiers Compare to Aprilair Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ By: Alpine Hardware
Feature
The 4040 by Alpine Hardware is a replacement humidifier solenoid valve.For Whole House Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Alpine Hardware is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
-24 Volts
-2.3 Watts
-60Hz
-Orifice (3/32-3/64) NOT INCLUDED
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
4. Aprilaire 4040 Solenoid Valve, 24 Volt for Aprilaire Whole House Humidifier Models 400, 400M, 500, 500M, 600, 600M, 558, 550A, 550, 568, 560A, 560, 700, 700M, 768, 760A, 760
Feature
Genuine Aprilaire humidifier replacement partMade in Madison, wi, usa
Ensures that the right amount of humidity is delivered into your home
Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home
Compatible with all Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
Description
Proper humidification of your home is important for protecting your familys health and the beauty of your home. The 4040 24 Volt solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid Valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.5. Aprilaire 4040 Solenoid Valve, 24 Volt
Feature
Genuine Aprilaire humidifier replacement partMade in Madison, WI, USA
Ensures that the right amount of humidity is delivered into your home
Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home
Compatible with all Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
Description
Proper humidification of your home is important for protecting your familys health and the beauty of your home. The 4040 24 Volt Solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.6. Solenoid Valve for Whole House Humidifiers
Description
Replacement solenoid formany brands/models of whole househumidifiers.Same as Aprilaire 4040. Bryant:HUMBBSBP2412-A27HUMBBLBP2417-A24HUMBBLFP1418-A24HUMBBWBP2417-A24 Carrier:HUMCCSBP2412-A27HUMCCLBP2417-A24HUMCCLFP1418-A24HUMCCWBP2417-A24Totaline: P110-SBP2412P110-LBP2417P110-LFP1418ICP: HMICSB12BHMICLB17BHMICLF18B Lennox:HCWB3-12HCWB3-17HCWP3-18HCWB3-12AHCWB3-17AHCWP3-18A Trane:THUMD200ABM00BATHUMD300ABA00BATHUMD500APA00BA American Standard:AHUMD200ABM00BAAHUMD300ABA00BAAHUMD500APA00BA Nordyne:917897091786309178640 Maytag:918127091812809181290 York:S1-BP5000MYS1-BP6000MYS1-FP7000MY Coleman:S1-BP5000MCS1-BP6000MCS1-FP7000MC Luxaire:S1-BP5000MLS1-BP5000MLS1-BP6000MLS1-FP7000ML 24 VAC 2.3 Watts Replacement solenoid value for newer Bryant Carrier Humidifiers. Valveincludes a new inline strainer (pre-inserted in inlet side of valve), and a compression nut &washer for the inlet side only. Solenoid Valve Replacement Instructions For power units unplug electrical cord. For bypass units turn off power to furnace. Also turn the humidistat off. Shut off water supply at the saddle valve Disconnect inlet and outlet water compression nuts. Double wrench. Note, some water may drip on floor. Remove the orifice (which controls the water flow)from the plastic or copper tube and make sure there is no obstruction.If blocked clean or replace. Remove the wire nuts from the water solenoid valve wire connections. Set aside. Remove screws that secure valve to unit. Attach new valve with screws. Do not over-torque screws into plastic housing. Reconnect wires with wire nuts. For units with plastic feed tubes inspect for brittleness, hairline cracks, nicks or abrasions, etc.Replace if necessary. Reconnect the water lines, double wrenching the compression nuts. Turn water back on and check system for leaks. Tighten compression nuts as necessary. Restore electrical service and a7. 4040 Replacement Humidifier Valve for Whole House Humidifiers Compare to Aprilair Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ
Feature
The 4040 by Eagleggo is a replacement humidifier solenoid valve.For Aprilaire Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
8. Antoble 4040 Humidifier Valve for Aprilaire Solenoid Valve, Part No# B2015-S85
Feature
The 4040 by Eagleggo is a replacement humidifier solenoid valve.For Aprilaire Humidifiers 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications: Volts: 24/60 Watts: 2.3 MOPD: 125 Orifice: 3/32 -Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing. -Includes compression nut, washer and inline strainer. -The inlet includes the compression fitting & ferrule. -For the outlet, your existing compression fitting is reused. -NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models: Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
9. Transhome 4040 HUMIDIFIER Solenoid Valve for Aprilaire,ReplacementCompare to Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ
Feature
Replacement 4040 humidifier solenoid valve.Compare to Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760, 768.
Do not work on models 330, 445, 110, 112, 350, 360.
High quality standards and is durable, robust.
Description
We stand by our words, if our product fails to deliver on what you expect of it simply return it and we will issue full refund...no questions asked.Take Advantage of Our Promo Offer - Add The Solenoid Valve to Cart Now!
10. Blavit Humidifier Water Valve for Aprilaire 4040 Solenoid Valve 24 Volt Humidifier Models 400, 500, 600, 700, 220, 224, 400A Part No. B2017-S85
Feature
The 4040 by Blavit is a replacement humidifier solenoid valve.For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
The humidifier valve includes compression nut, washer and inline strainer.
This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
Description
About:The 4040 by Blavit is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for " tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
Recent Comments