water level float switch buyer’s guide for 2019
We spent many hours on research to finding water level float switch, reading product features, product specifications for this guide. For those of you who wish to the best water level float switch, you should not miss this article. water level float switch coming in a variety of types but also different price range. The following is the top 9 water level float switch by our suggestions:
Best water level float switch
1. Elecall Stainless Steel Tank Water Level Sensor Float Switch 110V ES10010
Feature
Product Name : Water Level Sensor;Stainless steel Material;Contacts : NO+NC;Max Contact Rating : 10WIt does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Material:Stainless Steel. Alternating current: 223v.
The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water's rise or fall.
Description
Product Features:Product Name : Water Level Sensor;Contacts : NO+NC;
Max Contact Rating :10W;Max Switching Voltage :100V AC/DC;Max Switching Current :0.5A;Max Load Current:1.0A; Max Breakdown Voltage: 110V AC/DC; Max Carry Current :1.0A
Max Contact Resistance:100M;Temperature Rating: -30~+125 degree centigrade;Max Load Pressure: 0.2MPA;Net weight:43g
Installation: top or bottom mounted vertically ; Use medium: water, oil, chemical medium
Product Specification:
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank,
freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers,
carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever
your project may be. It can be easily converted from normally open to normally close by invertin the float. Note: because the current that the switch can carry is much little(0.5A),
you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.
2. uxcell 5 Pieces ZP4510 Liquid Water Level Sensor Vertical Float Switches
Feature
Product Name : Water Level Sensor;Model No. : ZP4510;Max Contact Rating : Max Contact Rating;10W : 10WMax Switching Voltage : 220V DC/AC;Max Switching Current : 1.5A;Max Breakdown Voltage : 300V DC/AC;Max Carry Current : 3A
Max Contact Resistance : 100m ohm;Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P
Thread Dia(Approx) : 9.5mm / 0.374";Switch Body Size : 23.3 x 57.7mm / 0.9" x 2.27"(Max D*H);Cable Length : 36cm / 14.2"
Color : White;Net Weight : 70g;Package Content : 5 x Water Level Sensor
Description
SA float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.It can be easily converted from normally open to normally close by inverting the float.
Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here.
Due to product batch is different, cable color may be different, we will random shipment.
Click the link, any more details, please find the relevant model. ( http://54.235.23.96/watch_images/huhuidianqi.jpg )
3. Level Sense 15 Feet Water Level Float Switch with Mounting Brackets
Feature
Includes Float Switch, Bracket, and Zip Ties15 Feet of Insulated 24 AWG Conductor
Can work in Normally Open or Normally Closed Operation
Float Bracket Expands to Accommodate Pipes from 1-1/4 to 3"
Perfect for DC Alarm Systems, Arduino Projects, and Level-Sense
Description
The switch may actuate a pump, an indicator, an alarm, or other device. It is rated for only for use with DC (not AC) applications up to 1.5 AMPs. It can be easily converted from normally open to normally close by inverting the float.This unit can also be an accessory to the Level-Sense line of water and leak detection equipment.
Max. Contact Rating: 50W Max.
Switching Voltage: 100VDC / 200VDC
Max. Switching Current: 1.5A Max.
Initial Contact Resistance: (Do not include the wire) 100m
Temperature Rating: -10 ~ +85
Float Ball Material: PP
Float Body Material: PP+GF
Screw Nut Material: PP+GF
E-Ring Material:PP
Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be.
Are you looking for only the bracket? You can find at it:
https://www.amazon.com/gp/offer-listing/B06XFCKF65/
4. Float Switch w / 10 ft Cable, Septic System, Sump Pump, Water Tank
Feature
3 Meters (10 feet) of cable, with adjustable counterweight.Normally open and normally closed (empty and fill) operations.
Rated up to 250 volts operations at up to 13 Amps or 1/2 HP
3 year warranty against manufacturing defects
Temperature ratings from 32F to 140F, and rated to IP68, with CE & IEC approvals
Description
This dual purpose float switch can be used for both emptying and filling operations.- Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts
- Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage
- 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications
- Environmental friendly (Mercury Free)
- suitable for use in septic, sump, and potable water applications
- Cable Weight is not to be used in Potable Water
- Built with a Honeywell Micro switch, rated for 100,000 operations
- Cable is Coated with PVC / Thermoplastic jacket
- Internally Contains a Stainless Steel Ball
- Includes adjustable counterweight.
- Manufactured in Argentina
- Three year warranty
- Constructed with non-toxic polypropylene
- Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm)
- Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C)
- CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001)
- Reinforced Double O Ring Cable Entry
Review online instructions at bit.ly/FloatSwitch
5. Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch
Feature
Color : Black;Net Weight : 24g;Package Content : 6 x Water Level SensorMax Contact Rating : 10W;Max Switching Voltage : 100V DC
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m Ohm
Temperature Rating : -10 ~ +85 C;Float Ball Material : P.P;Float Body Material : P.P;Float Ball Size(Approx) : 2.35 x 1.7cm (L*D)
Thread Dia(Approx) : 1.54cm / 0.6";Hex Head Size(Approx) : 2.5cm / 1";Body Total Length : 8.8cm / 3.5";Cable Length : 40cm / 15.8"
Description
Material: PlasticColor :Black
Features:
1.The float switch is a device used to sense the level of liquid within a tank.
2.The switch may actuate a pump, an indicator, an alarm, or other device.
3.It can be easily converted from normally open to normally close by invertin the float.
Please Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.
Package Content : 6 x Water Level Sensor
6. Baomain 4M Cable Float Switch Water Level Controller for Tank Pump
Feature
Product Name: Float Switch Water Level Controller; Model: UK-221Rated Current/Voltage: AC 10(8A) 250V~10(4A) 380V; Recommended Voltage: DC 24V
Working Temperature: 0C~60C; Control Range: 0.2m; Electrical Endurance: 50,000 times Contacts: NO+NC
Shape: Round; Cable Length : 4m / 13.1ft; Body Size: 10 x 8 x 4.5cm / 3.9" x 3.1" x 1.8"(L*W*T)
Net Weight : 742g; Package Content : 1 x Float Switch Water Level Controller
Description
7. Copapa Tanks Horizontal Liquid Float Switch Water Level Sensor NO NC
Feature
Product Name : Ceramic Thermostat; Color : White, Silver ToneModel.No : KSD301; Action Type : (NC)Normal Closed; Action Temperature : 150C/302F; Material : Metal, Ceramic;
Voltage : 10A AC 250V;Size(Each) : 3.4 x 1.2cm/1.33" x 0.47"(L*T);
Net Weight : 20g;
Package Content : 1 x Ceramic Thermostat
Description
General-purpose low cost, compact, large capacity, minute current thermostat. Automatically reset;it is close until the surface reaches 150 Celsius degree and then the switch open.; When the surface cools off about 5 degrees, the switch automatically close. It is used widely for coffee maker, water heater, immersion heaters, electric cookers, microwave ovens, automatic toasters, etc.Package Content; 1x Float Switch
8. DerBlue 6 Pieces Side mounted Horizontal Liquid Float Switch Water Level Sensor
Feature
Max Contact Rating : 10W;Max Switching Current : 0.5A;Max Breakdown Voltage : 110V DC;Temperature Rating : -10~80 ;Accurate error: 2mm In the water;Repeatability: 1mm In the water
Float Ball Material : P.P;Float Body Material : P.P;Switch formsN.O /N.COpen and close frequently
Thread Dia(Approx) : 1.54cm / 0.6";Hex Head Size(Approx) : 2.4cm / 0.9";Body Total Length : 8.8cm / 3.5";Cable Length : 40cm / 15.8"
Color : Black;Net Weight : 20g;Package Content : 6 x Water Level Sensor
Description
The description of products:
The plastic float switch of side mount duckbilled is a frequently opened, often closed, switching contact and with the overall brake, it's installed from the outside and doesn't need to be sealed.
The Main parameters of products:
Installation: It is installed horizontally drilling at the bottom or at the top
The texture of guide rod: PP plastic
The texture of floater: PP plastic
Pressure of work: 15 Bar
Temperature of work: -10~80
Accurate error: 2mm In the water)
Repeatability: 1mm In the water)
Switch formsN.O /N.COpen and close frequently)
Max Contact Rating :10W
The voltage of work:110VDC
The current of work: 0.5A
It is often used in mechanical equipment, such as environmental protection air conditioning, water cooling fan, water heater, water dispenser, dishwasher, Electric heating barrel, hydraulic press, treatment equipment of water, air compressor and other mechanical equipment, etc.
NOTE: The float switch cannot control solenoid valve directly or high power relay, ac contactor, etc. It will be buffer by adding small relays such as HH54P.
9. BRODY Float Switch Water Level Control Sensor with 10' Cable
Feature
RATED CURRENT: 16 AMPSRATED VOLTAGE: 250 VOLTS (YOU CAN USE IT FOR 12/120/220/240 VOLTS)
MAX. WORKING TEMP: 131F , PROTECTION GRADE: IP68
INCLUDES 10 FEET CABLE, COUNTERWEIGHT AND INSTRUCTIONS. READY TO INSTALL
Any questions? Please contact us through amazon. We are here to help
Recent Comments