Top slotted head drill adapter
If you looking for slotted head drill adapter then you are right place. We are searching for the best slotted head drill adapter on the market and analyze these products to provide you the best choice.
Best slotted head drill adapter
1. RV Trailer ADNIK Cordless Drill Adapter-Extended - 21100003 Jack Service Kit
Feature
Jack Service Kit; Use To Operate Stabilizing Jacks With Slotted Head Drive Screws; CordlessDescription
Product Description: Jack Service Kit; Use To Operate Stabilizing Jacks With Slotted Head Drive Screws; Cordless; Compatibility: Operate Stabilizing Jacks With Slotted Head Drive Screws; Includes Climbing Pins: No; Includes Climbing Pin Springs: No; Includes Cross Pins: No; Includes Shear Bolts/ Nuts: No; Includes Jack Lubricant: No
Features
Use To Operate Stabilizing Jacks With Slotted Head Drive Screws
Limited 90 Day Warranty
2. BAL R.V. Products Group 21100003 Cordless Drill Adapter
Feature
BAL21100003Description
BAL / Norco Industries manufactures quality products for the RV industry, such as slideouts, trailer frames, roof bows, leveling & stabilizing jacks, tongue jacks and wheel chocks.3. Ultra-Fab Products 48-979071 Ultra T-Slot Drill Attachment for Scissor Jack
Feature
Eliminates cranking of scissor jacksSaves time and effort
Speeds up raising or lowering of scissor jacks
Adapter fits all 3/8" drills
Manufacturers Lifetime Warranty
Description
Ultra T-Slot Scissor Jack Drill Attachment.4. Custom Cylinders Socket Jenie For Fleetwood & Coleman Pop-Up Campers Before 2005 - LVSG-875
Feature
Socket Jenie For Fleetwood & Coleman Pop-Up Campers Before 2005 - LVSG-875Description
Use this Socket Jenie LVSG-875 for raising and lowering pop-up camper roofs that use a 7/8" round crank with T end. The socket has a body length of 5-1/8" and requires a 1/2" drill chuck to be used with a low RPM/ high torque drill motor. A general drill would be: 110V drill should not be less than 5 amp, while a battery powered drill should be 24V. It is recommended that the drill have the extra front mounted handle to control the torque required to raise or lower the roof. The free length of this socket represents the distance that the crank inserts into the camper body to operate the roof. The portion of the socket that fits into the drill chuck is not included in the free length. Know brands that use this socket include: Fleetwood along with Coleman campers manufactured prior to 2005. This socket will also fit some newer model pop-up campers; therefore it is necessary that the amount of crank inserted into the camper body be carefully measured. This socket has a body length of slightly more than 5", with a 1" extension to fit into the drill chuck. Includes (1) LVSG-875 socket.Made from a single piece of steelFeatures a grey corrosion resistant finishThe stem has been specially machined to eliminate slipping in the drill chuck.Use with a Cordless or Electric 1/2" DrillFits Fleetwood along with Coleman pop-up campers manufactured prior to 2005Lifetime WarrantyBe sure to use caution5. PANOVOS (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt
Feature
2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
this nuts tools A must have for hurricane Snowstorm prone areas
Description
2pcs in a package.Christmas Tools Gift for Dad/Father,Husband, Boyfriend, Men,DIY Handyman
6. Goshen - Flagstaff - Rockwood - Palomino - Dutchmen Camper Crank Handle
Feature
Goshen Crank Handle for Starcraft / Flagstaff / Rockwood / Palomino / Dutchmen / Skamper Pop Up Campers (GOSHEN LIFT SYSTEM ONLY!)Interior Socket Width: .725" (roughly 11/16") | Exterior Socket Width: .845" (roughly 7/8")
This crank handle only works for campers with a Goshen (one main cable) lift system
Double check measurements to ensure proper fit!
Description
This part works for the following models of Pop-Up / Tent Campers (REFERENCE ONLY!!!):Starcraft (1994-Current)
Rockwood (1993-Current)
Flagstaff (1993-Current)
Palomino (1980-Current)
Dutchmen (All Years)
Skamper (All Years)
Coachmen by Forest River (2009-2012)
Viking (1995-2012, 2018-Current)
Goshen Crank Handle Dimensions:
Handle Length: 4-1/4 inches
End of Handle to Elbow: 9-7/8 inches
Elbow to Socket End: 12-1/4 inches
Interior Socket Width: .725 inches (roughly 11/16")
Exterior Socket Width: .845 inches (roughly 7/8")
DOUBLE CHECK MEASUREMENTS TO ENSURE PROPER FIT
This crank handle only works for campers with a Goshen (one main cable) lift system.
7. T1A Scissor Jack Adapter for 1/2 Inch Impact Wrench or 13/16 Inch Lug Wrench Adaptor, Used for Automotive Jack, RV or Trailer Leveling Jacks
Feature
Easily raise, lower and level your scissor jacks faster and more easily than ever.For use with 1/2" impact wrenches, drills or standard drive sockets
This is the perfect accessory for those hard to use loop type or double eyelet type scissor jacks
Fits most brands of scissor jacks. For use with 13/16 lug wrench/tire iron or socket or easily add a half inch adapter to any drill.
100% Satisfaction Money Back Guarantee.
Description
This is the original loop style scissor jack adapter from T1A. Why didn't someone else come up with this simple tool that saves so much time for such a low cost? We don't know, but we made it first (so it's obviously the best!) and now you can have it too. We love this tool and so will you. If you don't have a 1/2 inch hex socket or impact wrench, you can easily get a standard drill with a 1/2" adapter and use any cordless or corded drill to quickly and easily drive your scissor jacks.Our adapter is made of solid chrome vanadium with a durable black oxide finish. Dimensions are 2.2in X 1.65in X 1in. You should probably buy more than one, for each scissor jack on your toy hauler, trailer or RV and an extra one for a friend. They will love it too, trust us.
8. Happijac 182436 Standard Crank Handle
Description
Standard 4 inch crank handle The RV industrys first redundant safety check system protects you and your camper from mishap or failure. Happijacs camper jacks feature 2 inch square powder coated inner and outer legs which are significantly stronger than jacks using round tubes. Rated per ANSI standards, these jacks safely lift an incredible 1500 pounds, acme screw, to 1900 pounds, ball screw, per jack! Concave, cupped, footpads reduce movement and provide maximum stability. They can be easily installed, retrofitted onto most campers with Happijacs Z bracket mounting system, the industrys strongest, most secure bracket system. These amazing jacks are also unique in that they can be easily upgraded from manual, hand crank to an electric wireless remote control system with the simple addition of an electric motor drive kit and wiring kit. A quick release feature is also available with the ball screw jacks making it the only electric, remote ready jack with a quick release option. All this makes leveling your camper simple, quick and stress free. MFG# 182436 UPC# 7650537572949. Starcraft 1994 and Older Pop Up Tent Camper Replacement Crank Handle
Feature
Handle - 4 1/4"Middle - 10 1/4"
Oval End Length - 13"
Oval Width - 3/4"
Interior Socket Width: .615" (roughly 5/8") | Exterior Socket Width: .850" (roughly 7/8")
Description
The Starcraft Crank Handle works for model years 1994 and OLDER of Starcraft Pop-Up / Tent Campers ONLY. It has the oval end that connects to the crank mechanism.For Starcraft model years 1994 and newer, the cranking winch takes the square end, tubular Goshen Stamping Crank Handle. Within the StarCraft 1994 and early 1995 model years, some models were made using the older StarCraft lift system and some were made with the new Goshen lift system, and the crank handles for those are very different. Please call ahead prior to placing the order if you have any question regarding the Starcraft pop-up camper lift system and crank handle.
* Please note that some Starcraft Campers made prior to 1994 may require a longer extension handle to enable cranking using the Starcraft Crank. The long handle version is no longer manufactured and is no longer available. You may need to modify this Starcraft Crank or your Starcraft Camper in order to make it work for your specific use.
Double check the dimensions and shape of this Starcraft Crank before you purchase to ensure that this crank handle will work for your camper
Recent Comments