Top recommendation for damascus knife kit
Finding the best damascus knife kit suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best damascus knife kit
1. Payne Bros Custom Knives 6.5" Delta Damascus Blade Knife kit - Knife Making - Knife Kits (Rosewood)
Feature
Great looking hardwoodKnife Making
Wood Scales
PAYNE BROS
damascus
Description
Knife kit includes 6.5" DELTA DAMASCUS BLADE knife blank, 3.5 inch blade. WOOD Scales, Rivets, and instructions. This makes a great gift, and is fairly easy to complete. No special tools required. High quality custom leather sheath also available. This sale does not include finished knife, photos to show end result.2. 7" SKINNER BLADE Damascus knife kit - KNIFE MAKING - KNIFE KITS (ZEBRA)
Feature
Great looking hardwoodKnife Making
Wood Scales
PAYNE BROS
damascus
Description
Knife kit includes 7 inch overall Damascus SKINNER knife blank, 3.5 inch blade. WOOD Scales, Rivets, and instructions. This makes a great gift, and is fairly easy to complete. No special tools required. High quality custom leather sheath also available. This sale does not include finished knife, photos to show end result.3. ColdLand | 7.50" Custom Handmade Damascus Steel Blank Blade Kit Knife Making Suppllies with Sheath, Brass Pins and Handle Scales SK103-1
Feature
WARNING: Please buy ONLY from Leather-n-Dagger when you see "Sold by Leather-n-Dagger and Fulfilled by Amazon" or "Ships from and sold by Leather-n-Dagger". Other sellers are selling FAKE COPIES of our products with CHEAP QUALITY. Please don't buy from them. Our branded products are: "Leather-n-Dagger", "ColdLand Knives" and "Rocky Knives". Thanks a million !!!Solidly built for tough use such as hunting, camping, other outdoor sports, bush craft activities and tracking! Long lasting sharp edge: ideal for real hunt experience.
Hand forged by using 1095 & 15N20 steels. Over 510+ true layers of Damascus steel. Good Quality. Will long last for several years (lifetime if handled with care). Hardness: 58-60 HRC on Rockwell Scale.
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. Leather sheath and scale colors may be different too. 100% satisfaction guaranteed or fully refunded.
SHIPPING: This item can NOT be shipped to P.O.Boxes (full street address is required). We also accept WHOLESALE ORDERS. Please read below for PRODUCT DESCRIPTION before purchasing.
Description
BRAND: ColdLand Knives.TOTAL LENGTH: 7.50" (approx.).
BLADE LENGTH: 3.50" (approx.).
HANDLE MATERIAL: Damascus steel, Bras pins, Colored Natural Bone, Bars Bolster,
SHARPNESS: Medium to very sharp (you can further sharpen it according to your own taste).
BLADE MATERIAL: Damascus steel 1095 & 15N20.
BLADE HARDNESS ON ROCKWELL SCALE: 58 to 60 HRC.
NUMBER OF BLADE LAYERS: 512 + true layers.
BLADE THICKNESS: 4 to 5 mm (Approx.).
ITEM CONDITION: New.
SHEATH: Pure & Genuine leather sheath is included. HISTORY OF DAMASCUS STEEL:
From 300 BC to 1700 AD Damascus steel was the high quality steel used in blades and it was famous for making strong swords so well-forged that it could bent under pressure without breaking, yet held an edge so sharp it could cleave a big piece of wood in half with only the force behind one arm. During Middle Ages Damascus steel was used to make swords and the art of making Damascus steel was considered as a secret. Then a time came when process for making the original Damascus steel was lost. But it emerged again though modern day Damascus knives are not made in the same way as the medieval Damascus blades. The reasons for this are obvious, as no one knows exactly how those blades were made. ABOUT OURSELVES:
If you are looking for a better quality knife or blank blade at a good price then this is the right place for you. We make our products with care and spent hours of work. We use high quality material and we do excellent finishing. We make few knives but with love & quality. You will receive good value for money. You will be proud to give our knives as GIFTS, if you want, to someone you know or love.
4. KATSURA Woodworker Project kit - Premium AUS 10 67 Layers Damascus steel - 5 inch Small Santoku Knife kit blank - Nice gift box
Feature
WOODWORKER Knife Project Kit includes Knife Blade ONLY; handle material not included; design your own handle with your choice of materialTHE BLADE is made of Japanese 67-Layer Damascus steel with a AUS 10 cutting core, 60+ Rockwell hardness
PERFECTLY balanced, triple rivet design, full-size handle; includes 3 sets of stainless steel pins and a BONUS mosaic center pin free of charge
EXTREMELY Sharp blade for exceptional fine cuts, edge retention and durability
Overall Length: 9.75-inch, blade length: 5-inch, NW: 3.15 OZ
Description
The KATSURA AUS 10 Small Santoku Knife kit comes with a blade blank only, allowing for a design-it-yourself handle made from a material of your choice. Whether it is slicing, dicing, or mincing, the santoku does it all as the Japanese variant of the classic chef knife. The blade is crafted with a Japanese AUS 10 steel cutting core forged welded with 66 layers of Damascus steel and tempered with heat treatment technology to reach a final 60+ Rockwell hardness making it razor sharp and highly wear resistant, yet easy to sharpen. The handle is perfectly weight balanced and features a full-tang and 3-pin design with a Mosaic center pin and 3 set of regular pins included. Designed to suit the cutting techniques used by professional Japanese chefs, this knife brings culinary mastery to any kitchen. Every KATSURA knife comes inside a handcrafted gift box. USE AND CARE: not for chopping bone; do not use on hard surfaces like granite, tile, or glass cutting boards; wash by hand with gentle dish soap, rinse, and dry with a dishcloth; sharpen with a whetstone at an angle of 15 degrees. Limited lifetime warranty, full satisfaction guaranteed.5. Damascus blade blanks with basic sheath / knife making / knife kits / (5209)
Feature
Damascus High Carbon full tang SteelHigh Quality Damascus Construction: 1095 High Carbon Steel and 15n20 Steel (Over 200 Layers)
Blade comes sharpened. A final edge may be applied for an even sharper razor edge
Payne Bros Custom Knives
Description
This blade is made from 1095 steel and 15n20. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade comes with a basic leather sheath. Wood or resin scales are also available along with rivets, instructions or mosaic pins for additional cost. This would make a great kitchen/hunting/fishing knife. Photo shown is of a comparable set.6. ColdLand |15" Handmade Damascus Steel Bowie Blank Blade Knife Making Supplies FB05-1
Feature
This is our new introductory product so take advantage of our lowest prices right now. Prices may increase in future. Hurry up!!!TOTAL LENGTH: 15.00" (approx.), BLADE LENGTH: 10.00" (approx.), HANDLE MATERIAL: ---.
Solidly built for tough use such as hunting, fishing, camping, hiking, outdoor sports, bush craft activities and tracking etc.! Long lasting sharp edge: ideal for real hunt experience.
Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Good Quality. Will long last for several years (lifetime if handled with care). Hardness: 58-60 HRC on Rockwell Scale.
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. Leather sheath and scale colors may be slightly different for knives and kits (blank blades do not come with sheaths and scales). The holes in the handle can be in small or bigger sizes and can be found at different places on the handle. 100% satisfaction guaranteed or fully refunded.
Description
BRAND: ColdLand Knives.SHARPNESS: Medium to very sharp (you can further sharpen it according to your own taste).
BLADE MATERIAL: Damascus steel 1095 & 15N20.
BLADE HARDNESS ON ROCKWELL SCALE: 58 to 60 HRC.
NUMBER OF BLADE LAYERS: 260 + true layers.
BLADE THICKNESS: 4 to 5 mm (Approx.).
ITEM CONDITION: New.
SHEATH: Pure & Genuine leather sheath is included with knives and kits. HISTORY OF DAMASCUS STEEL:
From 300 BC to 1700 AD Damascus steel was the high quality steel used in blades and it was famous for making strong swords so well-forged that it could bent under pressure without breaking, yet held an edge so sharp it could cleave a big piece of wood in half with only the force behind one arm. During Middle Ages Damascus steel was used to make swords and the art of making Damascus steel was considered as a secret. Then a time came when process for making the original Damascus steel was lost. But it emerged again though modern day Damascus knives are not made in the same way as the medieval Damascus blades. The reasons for this are obvious, as no one knows exactly how those blades were made. ABOUT OURSELVES:
We also accept WHOLESALE ORDERS. If you are looking for a better quality knife or blank blade at a good price then this is the right place for you. We make our products with care and spent hours of work. We use high quality material and we do excellent finishing. We make few knives but with love & quality. You will receive good value for money. You will be proud to give our knives as GIFTS, if you want, to someone you know or love.
7. ColdLand Knives Custom Handmade Damascus Steel Full Tang Blank Blade for Knife Making Supplies SB03
Feature
IMPORTANT NOTE: This is our stock photo. You will receive different pattern as every Damascus Blade is unique in the world. 100% satisfaction guaranteed or fully refunded.Awesome Professional Quality. Will long last for several years (lifetime if handled with care). Hardness: 58-60 HRC on Rockwell Scale. Long lasting sharp edge: ideal for real hunt experience.
Hand forged by using 1095 & 15N20 steels. Over 200 true layers of Damascus steel.
Buy only from LEATHER-N-DAGGER store on Amazon. This item's Brand: ColdLand Knives
IMPORTANT: Please read full product description below before purchasing.
Description
Overall Length: 9.00 Inches (approx), Blade Length: 4.50 Inches (approx), Blade Material: Damascus Steel, Handle Material: Damascus Steel, Sharpness: Medium to very sharp (you can further sharpen it as you like) - Damascus Steel Composition: 1095 high carbon & 15N20 nickel- Blade Layers: 200+ true layers ===>>> We have our own forging unit, hammer and a production unit so we care about quality. All our products are guaranteed genuine layered Damascus steel made with 1095 high carbon and 15N85 nickel (not fake or imitation Damascus). ===>>> WE (ColdLand Knives) ACCEPT WHOLESALE ORDERS: We make Damascus Blank Blades, Damascus Knives, Damascus Knife Kits, Damascus Swords etc. ===>>> NOTE 1: You may find more holes in the handle but you don't need to use all of them. Secondly, you can use a sand paper to rub and adjust brass pins according to the sizes of the holes. ===>>> NOTE 2: This is a stock photo of the item and as they are all handmade so they can't be exactly the same so they may vary in Damascus pattern, measurement, pin holes location, pin hole sizes, pin hole quantities and design & color of leather sheath etc. These qualities will make your knife UNIQUE in the world. ===>>> NOTE 3: We don't provide any instructions or guide to make knives. So you should already know how to make a knife or if you are a beginner / novice knife maker then we recommend you to watch videos on the internet (there are lots of good videos out there).8. KnifeKits: Pony Mid-Lock Damascus/SS Folding Knife Kit - Parts Kit w/Red Quince Handles - DIY Knife Parts Kit
Feature
Blade Steel: 71 Layer Stainless Damascus - (8cr13 core) (heat-treated/cryo-treated) (RC: 56-58)Overall Length: 5.00 inches
Closed Length: 3.00 Inches
Blade Length: 2.00 inches
Handle Material: Pre-attached/Included (Red Quince)
Description
The Pony mid-lock damascus/ss pocket knife kit is designed as a DIY project knife that can produce a truly high-line folding knife when properly finished. This kit model is a mid-lock folding knife design and has the handle scales pre-attached to each stainless liner by 2-part, 2-ton handle adhesive. The handle scales are already expertly finished to the outer edges of the stainless steel liners and little more than light sanding is needed to finish the handle to a completed state. This helps the beginner to achieve a pro-level finish with little or no experience, tools or shop space. This DIY pocket knife kit is a magnificent beginner's model, especially for those who want more than a screw-together challenge. The damascus blade on this model is 2 inches long and is pre-ground. It is also pre-etched and sharpened. The overall length of the Pony knife kit is 5 inches. The closed length is 3 inches. This knife kit comes with complete pin hardware, including nickel-silver liner pins for ease of assembly. The position of the lock on this model is excellent for a working pocket knife. Although, it has a very dressy finish. Spend a little afternoon shop time with this DIY designer knife kit and produce something that you'll be truly amazed at, a precision knife that you can carry for a lifetime.9. ColdLand | 7.50" Custom Handmade Damascus Steel Blank Blade Kit Knife Making Suppllies with Sheath, Brass Pins and Handle Scales SK103-2
Feature
WARNING: Please buy ONLY from Leather-n-Dagger when you see "Sold by Leather-n-Dagger and Fulfilled by Amazon" or "Ships from and sold by Leather-n-Dagger". Other sellers are selling FAKE COPIES of our products with CHEAP QUALITY. Please don't buy from them. Our branded products are: "Leather-n-Dagger", "ColdLand Knives" and "Rocky Knives". Thanks a million !!!Solidly built for tough use such as hunting, camping, other outdoor sports, bush craft activities and tracking! Long lasting sharp edge: ideal for real hunt experience.
Hand forged by using 1095 & 15N20 steels. Over 510+ true layers of Damascus steel. Good Quality. Will long last for several years (lifetime if handled with care). Hardness: 58-60 HRC on Rockwell Scale.
NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. Leather sheath and scale colors may be different too. 100% satisfaction guaranteed or fully refunded.
SHIPPING: This item can NOT be shipped to P.O.Boxes (full street address is required). We also accept WHOLESALE ORDERS. Please read below for PRODUCT DESCRIPTION before purchasing.
Description
BRAND: ColdLand Knives.TOTAL LENGTH: 7.50" (approx.).
BLADE LENGTH: 3.50" (approx.).
HANDLE MATERIAL: Damascus steel, Bras pins, Colored Natural Bone, Damascus Bolster,
SHARPNESS: Medium to very sharp (you can further sharpen it according to your own taste).
BLADE MATERIAL: Damascus steel 1095 & 15N20.
BLADE HARDNESS ON ROCKWELL SCALE: 58 to 60 HRC.
NUMBER OF BLADE LAYERS: 512 + true layers.
BLADE THICKNESS: 4 to 5 mm (Approx.).
ITEM CONDITION: New.
SHEATH: Pure & Genuine leather sheath is included. HISTORY OF DAMASCUS STEEL:
From 300 BC to 1700 AD Damascus steel was the high quality steel used in blades and it was famous for making strong swords so well-forged that it could bent under pressure without breaking, yet held an edge so sharp it could cleave a big piece of wood in half with only the force behind one arm. During Middle Ages Damascus steel was used to make swords and the art of making Damascus steel was considered as a secret. Then a time came when process for making the original Damascus steel was lost. But it emerged again though modern day Damascus knives are not made in the same way as the medieval Damascus blades. The reasons for this are obvious, as no one knows exactly how those blades were made. ABOUT OURSELVES:
If you are looking for a better quality knife or blank blade at a good price then this is the right place for you. We make our products with care and spent hours of work. We use high quality material and we do excellent finishing. We make few knives but with love & quality. You will receive good value for money. You will be proud to give our knives as GIFTS, if you want, to someone you know or love.
10. KATSURA Woodworking Project kit for Japanese VG-10 67 Layers Damascus Steel 7.5 inch Chef Knife kit blank woodworker with Nice Gift box
Feature
WOODWORKING PROJECT KIT includes KNIFE BLADE ONLY, handle needs to be made separately; customize your own handle out of your favorite materialTHE BLADE is made with Japanese VG-10 Core reinforced with 66 Layers of Damascus Steel, 62+ Rockwell hardness
PERFECTLY balanced, 3-pin design handle; 4 sets of pins are included Free of charge
MAINTAINS an extremely sharp edge over a long period of time
SIZE: 7.5-inch Blade, 12.5 Inch Overall , N.W. 5.2 OZ
Recent Comments