Top recommendation for 1911 compensator punisher
Finding the best 1911 compensator punisher suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best 1911 compensator punisher
1. Impresa Products Universal Bench Block - Ideal for M1911 / M-1911 / M 1911 -Style Pistols, Glock, 10/22s and More - Ideal Armorers Block and Gun Smithing/Gunsmithing Tool
Feature
Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearmsPerfect for disassembling and reassembling handguns. Ideally suited for M1911s and M1911-style pistols as well as other firearms (10/22s, etc.)
Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Simplifies the installation of pins, detents and springs
Highly useful for drifting and staking assembly pins, barrel link pin removal, dressing the ejector port, staking the front sight, dressing the slide rails, removing hammer and sear pins, main spring removal, drifting the rear sight and more
Provides the same quality as Wheeler Engineering's / Battendfeld Technologies' universal bench block at a more affordable price
Description
WARNING: Always make sure firearms are unloaded before attempting disassembly or reassembly. Inspect the chamber and magazine to be sure there is no ammunition in the firearm. CAUTION: Wear safety glasses while disassembling firearms. Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Perfect for disassembling and reassembling handguns. Ideally suited for M1911s and M1911-style pistols as well as other firearms (10/22s, etc.). Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Simplifies the installation of pins, detents and springs. Highly useful for drifting and staking assembly pins, barrel link pin removal, dressing the ejector port, staking the front sight, dressing the slide rails, removing hammer and sear pins, main spring removal, drifting the rear sight and more. Provides the same quality as Wheeler Engineering's / Battendfeld Technologies' universal bench block at a more affordable price.2. Elite Force 1911 Extended Magazine 6mm Airsoft
Feature
Aluminum constructionAccepts standard 12 gram cartridges
Made for KWC CO2 1911
27 rounds
Description
Replacement magazine for Elite Force 1911 6mm Airsoft pistols. This will fit additional models from KWC. 27 rounds and all metal construction.3. Elite Force 1911 Tac Airsoft Blk/Deb
Feature
Full metal constructionDoes not include CO2 Cartridge
Front cocking serrations on the slide and fast draw diamond grips
Cold weather ready. High tang beavertail safety grip
Ambidextrous safety for right and left handed users
Description
The elite force 1911 tac takes the standard 1911 and completely upgrades it to a modern tactical pistol. Maintaining the same traditional 1911 reliability and proven design, the 1911 tac adds increased functionality to the classic system, making it suitable for nearly any present-day application. The EF 1911 tac features include: a full metal frame, slide and barrel; a custom two tone look with a black and tan color configuration to help set it apart from the plethora of other 1911s on the market; elite force trademarks; a rail system for attaching lights, lasers, or other accessories; a 14mm counter clockwise threaded tip for attaching mock suppressors; a textured pistol grip for improved weapon handling; an ambidextrous thumb and grip safety for easy operation by both left and right handed shooters; a milled 3 hole skeleton trigger; and white dotted front and rear competition iron sights for quick target acquisition. The elite force 1911 tac functions off of the same crisp, hard hitting recoil system as the EF 1911 A1. It is also powered by CO2 cartridges and features the high-powered recoil spring, double action, and adjustable hop-up. The elite force 1911 tac provides you with everything you could want in a modern gas blowback pistol: incredibly realistic and crisp recoil, beautiful design and style, precision accuracy at a variety of ranges, and the inclusion of barrel threading and a rail mounting system for attaching suppressors, lights, lasers, and other accessories. Package includes one elite force 1911 tac gas blow back handgun one elite force 15 round CO2 magazine one Allen wrench one owners manual.4. Recover Tactical CC3 1911 Grip & Rail System, Black
Feature
Simplest way to add a rail to your 1911Easy installation - no gunsmith or permanent modifications required
Made from high-grade reinforced Polymer - will not break or damage your gun
Universal fit for most Standard sized 1911 RCV-W-CC3-BLK pistols
Recover HC11 holster compatible
Description
The recover grip and rail system can be easily installed onto most standard size 1911 RCV-W-CC3-BLK pistols in under five minutes. Installation does not require assistance from a gunsmith and no permanent modifications are required to be made to your gun. The recover grip and rail system is made from high-grade reinforced polymer and will not break or damage your gun. To install, simply unscrew your old grip and screw your new recover CC3 grip on in its place. For more detailed view please visit us at recover tactical and watch the install video. The recover CC3 grip was designed by world renowned Israeli weapons designer Tamer porta. Tamir has more than 20 years of experience in designing innovative weapons systems including the tavor Assault rifle used by the Israeli defense forces. Tamir founded recover Tactical in order to bring his vision for highly designed, functional and affordable weapon accessories to the broader shooting community.5. Punisher 1911 Grips in White on Black
Feature
Full size 1911 grip with punisher inlayFitls full Size 1911 and clones. Goverment Commander
Fits Ambidextrous 1911
Deep Thumb notch for magazine release and comfort
Ultra Light and durable
Description
Full Size 1911 Grips with Ambi cuts 1911 Punisher Engraved Black Grips: Great upgrade to your full sized 1911. A lightly rough textured surface with white Punisher inlay provides maximum grip and comfort . Magazine release thumb relief makes it easier to drop your magazine without repositioning your grip. Strong, durable and impact resistant, High Quality and made to last. Perfect weather you are looking to improve your grip or the style of your 1911. Fits standard full size 1911 with ambidextrous safety. Perfect addition to every 1911 collection. Grips only, no firearm. Material: ABS: Is a very strong and durable. ABS is also UV stable and should not deteriorate when exposed to direct sun light for long periods of time. Please note all parts are created via 3d Printed using FDM. This process builds up the parts layer by layer and as a result you will be able to notice the slight layers in the finished parts. These lines are common in all 3d printed objects and is NORMAL for the parts.6. 1911 Pistol Grips .25" Thickness - Honeycomb Punisher
Feature
Thickness: 0.25" (0.635cm)Density: 1.42
Water Absorption: 0.3%
Molded Shrinkage: 0.7%-1.25%
Heat Resistance:(2hr/'C): 200'C
Description
Designed to frame the 1911, this simple grip will highlight the look of the 1911 instead of taking attention away from it. Specifications (Based on the JIS K6911 standard) - Thickness: 0.25" (0.635cm) - Density: 1.42 - Water Absorption: 0.3% - Molded Shrinkage: 0.7%-1.25% - Heat Resistance:(2hr/'C): 200'C - Impact Strength: 3.0-3.5 Kgf-cm/cm2 - Flexible Strength: 9.5 Kgf/mm2 - Tensile Strength: 5.6 Kgf/mm2 - Compressive Strength: 22.0 Kgf/mm2 - Isolation Resistance: 1x5^(8-9) (ohm) - Breakdown Voltage: 11.0Kv/mm7. Pearce Grips, Rubber Finger Groove Insert, Fits Colt Government Model 1911 and Equivalents
Feature
Side portion of these grips are only 1mm thick; overall width is only minimally affectedFits under any GM 1911 side panel grip adding rubber finger grooves
Provides better comfort and better handling
Allows the user to use any type of side panel grips (wood, simulated ivory, pearlite, etc)
Description
This Pearce PG-1911-1 fits under any GM 1911 side panel grip adding rubber finger grooves for comfort and better handling. Because the side portion of these grips are only 1mm thick the overall width is only minimally affected. It allows the user to use any type of side panel grips (wood, simulated ivory, pearlite, etc) and have front finger grooves.8. Creatrill 2 Pack Magwell Metal Decal Sticker - Punisher Skull 1 inch by 1.38 inch
Feature
- Comes with 2 sets decals in one package- Size: 1" x 1.38". Weight 0.32 oz
- Quality made from weather resistant metal that does not rust or corrode and andare3dimensional
Super strong adhesive tape on the back, just peel the backing to stick
TacticalSkullforGunMagazine,Car,Truck,Motorcycle,etc. Also great decoration choice for cellphone, iPad, tablet, headset, PC case, keyboard, etc.
9. Tool for Kimber's 1911 Ultra Platform (2019 Machined Brass)
Feature
Fits those Kimber models were the word "Ultra" appears in the model name stamped on the right side of the slideReplaces need for Kimber wire tool or paper clip.
Aligns disassembly notch perfectly.
Easy to insert and remove.
CNC Machined Brass
Description
If your Kimber model name stamped on the right side of the slide contains the word "Ultra" the tool fits.
Both the 2012 and 2015 versions will align the dissassembly notch perfectly and perform identical regardless of the caliber.
Completely self aligning, simple to insert and remove.
2015 model has a wire handle feature that can be removed and replaced as desired.
(The tool is inserted using the wire handle without the need to grasp the tool near the front of the pistol. For folks with large fingers or difficulty working in tight places this is a great aid.)
Storage tube has bright red anti-roll square caps. Resists rolling off bench and easy to spot.
The tool will jump into place while being inserted making this a very simple tool to insert.
The unique open tail design bypasses the inner spring plug and positions the outer spring plug directly aligning the disassembly notch.
Unlike a barrel designed tool, the inner spring plug is not fully compressed allowing some access to the inner spring for flushing and oiling.
Once the rod assembly is out of the firearm, the tool is easily removed using our SC-100 spring compressor or using the slide as a spring compressor.
10. Kimber Pro and Compact Take Down Tool (Mirror Finish)
Feature
Fits Kimber models were the word "Pro" or "Compact" appears in the model name stamped on the right side of the slideUsed instead of the factory wire tool or paper clip.
Aligns take down notch perfectly.
Easy to insert and remove and does not use or require a modified guide rod.
Polished brass finish.
Recent Comments