Top bushnell trs-25 riser
If you looking for bushnell trs-25 riser then you are right place. We are searching for the best bushnell trs-25 riser on the market and analyze these products to provide you the best choice.
Best bushnell trs-25 riser
1. Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight, Black
Feature
2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditionsMOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life
Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount
Description
Sig Sauer ROMEO5 compact red dot sights provide civilians and armed professionals a robust 1x aiming solution for any situation.Ultra-low parallax so point-of-aim is point-of-impact and the red dot remains parallel to the bore of your firearm, no matter what your viewing angle is relative to the optical axis of the sight.
Unlimited eye-relief allows you to acquire the aiming point and the target regardless of the position of your eye behind the sight.
The readily available CR2032 battery is side-loading, allowing for quick battery replacement (featuring 50,000+ hours or more of life).
FEATURES:
- 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
- MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 50,000+ hour battery life
- Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
- Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
- Includes a M1913 Picatinny low mount riser and a co-witness 1.41"" riser mount
TECH SPECS:
- Magnification: 1x
- Objective Clear Aperture: 20 mm
- Eye Relief: Unlimited
- Illumination Settings: 8 Daytime / 2 NV
- Elevation Adjustment Range: +/- 40 MOA
- Windage Adjustment Range: +/- 40 MOA
- Reticle: 2 MOA Red Dot
- Adjustment increments: 0.5 MOA
- Battery: (1) CR2032
2. Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, Black
Feature
Trophy red dot, 1x25mm; 3 MOA, Dot-reticleEasy target acquisition; Mounting Length of 1.1"
Amber-bright high contrast lens coating (front lens is tinted amber)
TILTED front lens reflects LED light to create red dot; Bushnell logo color on the product may vary (white/gold)
Red dot LED light source secured inside the scope with adhesive (by design, partially obstructs field of view)
Red dot may appear blurry or misshapen if the dot intensity is set too high for the ambient light conditions (most likely to occur indoors with artificial light)
Caution: An illumination setting that is too high for ambient light conditions will result in a dot that appears distorted and non-concentric. Please refer to the user manual attached below for troubleshooting steps and instructions
Description
TROPHY RED DOT 1 X 25 3 MOA DOT-RETICLE MATTE FINISH EASY TARGET ACQUISITION3. UTG Med-pro Compact Riser Mount, 0.83" High, 3 Slots
Feature
New Gen. riser mount for rifles with Picatinny/Weaver rail1 Picatinny rail with 3 slots
Side plate with spring tension for quick and easy installation
Precision machined from aircraft aluminum with matte black anodizing
Dimensions: 1.6 by 1.75 by 1 inches (L x W x H)
Description
The UTG Med-pro compact riser mount. Features: - new Gen. Riser mount for rifles with Picatinny/Weaver rail - 1.6" long Picatinny rail with 3 slots - side plate with spring tension for quick easy installation - precision made from Aircraft aluminum with matte black Anodizing - 0.83" saddle height with see-through design. Specifications: - material: aluminum - weight: 1.6 oz - pieces: 1 - rail type: Picatinny/Weaver - no. Of rails: 1 - length: 1.6 inch - width: 1.75 inch - height: 1 inch4. Bushnell Optics TRS-25 Hirise 1x25mm Red Dot Riflescope with Riser Block, Matte Black
Feature
Quality optics with stunning HD clarity100% quality materials used and tested extensively
Beautiful design and durability built to last
Lightweight 6.0 ounce 3 MOA HiRise Red Dot Riflescope
11 brightness settings provide optimum illumination in any light condition
Includes integral mount and protective lens cover
Conserves battery life by self regulating brightness based on available light and power down when the protective storage hood is attached
Supplied riser block positions the sight at optimum height on AR-15 flat tops or tactical shotguns
Description
Blazing Target Acquisition. Peak Accuracy. There's nothing like a red dot for fast target acquisition and accuracy in dim conditions, and no one makes red dots like Bushnell. The TRS-25 1x25 red dot is engineered with Amber-Bright optics to help you quickly distinguish between a brown tree and a brown critter. Thanks to the scope's multicoated optics, hunters will have no problem seeing their target in low-light conditions. Other features include a 100-percent waterproof/fogproof/shockproof construction, a dry-nitrogen-filled housing, and a CR2032 battery. About the Sight: This sight can be easily used with both eyes open (eye relief is unlimited), increasing the shooter's awareness of the surrounding environment and providing faster target acquisition. There is no need for centering, due to the parallax free design in which the dot follows the movement of the users eye while remaining fixed on the target. The TRS-25 delivers full size performance in a sight with reduced size and low power consumption. Mounting the Sight:The TRS-25 sight mounts easily on any Weaver style or Picatinny rail. An Allen style cross screw is used to secure the sight to the rail, and the clamping system provides adequate strength to keep it securely mounted. Once resistance is felt when tightening the screw it should be rotated no more than additional turn (over-tightening the screw may strip the threads). About Red Dot Lens Positioning: All red dot sights have an objective lens at the front of the unit that is spherical in shape. However, unlike a conventional riflescope, the objective lens in a red dot sight is positioned off axis and appears to be tilted when looking at the sight. This angle of the front lens allows the light generated by the battery powered LED light source inside the unit to be reflected back into the sight. The reflected light becomes the dot or aiming reference that the user sees when a red dot sight is switched on. This engineered bending of light is what makes todays red-dot sights so popular and easy to use. Adhesive is used on the inside of the sight to secure the LED to the inside of the tube. By design, the led package intrudes slightly on the field of view.
About the Red Dot Reticle: The TRS-25 utilizes a crisp, sharp red dot reticle. A control knob is used to adjust the red dot setting. A certain amount of resistance is designed into the control knob to ensure that the sight is not inadvertently turned on. The red dot may appear blurry if the dot intensity is set too high for the ambient light conditions. This is most likely to occur indoors with artificial, fluorescent lighting. The illumination control knob should only be set at the highest settings for use in bright ambient light conditions; for example, outdoors on a sunny day. An illumination setting that is too high for ambient light conditions typically results in a dot that appears distorted and non-concentric. For best results, increase the red dot setting until the scope gives the user an aiming reference that is perceptible but not glaring. Installing the Sight with Hi-Rise Block The AR731306 versions of the TRS-25 are supplied with a "Hi-Rise" mounting block that can be used to position the sight at the correct height for optimum performance on an AR-15 style rifle with a flat top receiver. | Tilted, amber front lens uses reflected LED light to create red dot |
By design, the LED light is secured to the inside of the scope with adhesive and may partially obstruct the 360 degree view |
5. UTG Super Slim 3 Slots Picatinny Riser Mount, 0.83"
Feature
Made from 6061-t6 aluminum with precision CNC machining and finished in matte black hard coat anodizeEquipped with square-shaped Integral Recoil Stop and locking Torx screw for a guaranteed zero hold
Lightning cuts massively reduce weight resulting in a fully capable, low mass, and aesthetically pleasing Picatinny riser mount
Continuous rail edge design, installing multiple riser mounts side by side forms one continuous Picatinny rail
Includes T20 Torx Allen wrench for a simple and friendly installation, no gunsmith required
Description
UTG new super slim Picatinny riser mount machined from aluminum, finished in a matte black hard coat anodize, and utilizing locking Torx screws and integral Recoil stops for a secure zero hold. Lightning cut look and design massively reduces weight and bulk. 0.83" saddle height, 3 slots, 1.57" in length.6. Bushnell Optics TRS-25 Hirise 1x25mm Red Dot Riflescope with Riser Block, Matte Black (Renewed)
Feature
Beautiful design and durability built to lastLightweight 6.0 ounce 3 MOA HiRise Red Dot Riflescope
11 brightness settings provide optimum illumination in any light condition
Includes integral mount and protective lens cover
Conserves battery life by self regulating brightness based on available light and power down when the protective storage hood is attached
7. Bushnell AK Optics AK25 1x25mm Red Dot Sight, Matte Black (tilted front lens)
Feature
Quick-pointing dot with 11 intensity settings, 25mm objective for virtually unlimited field of view at 100 yardIntegral mount works on any Picatinny rail or weaver-style case
Waterproof, Fogproof and shockproof. Measures 2.4 inch long and weighs only 3.7 ounces
Tilted front lens reflects LED light to create red dot. Red dot LED light source secured inside the scope with adhesive
Red dot may appear blurry or misshapen if the dot intensity is set too high for the ambient light conditions
Description
Finally a bright sighting solution for one of history's most resilient rifles. Its quick-pointing dot with 11 intensity settings make the Bushnell AK optics Red dot a standout in any shooting scenario. The integral mount works on any Picatinny rail or weaver-style case. Don't let its incredibly light four ounces fool you. This waterproof, fogproof, shockproof performer hangs tough through the harshest use you care to show it.8. UTG Hi-Profile Compact Riser Mount, 1" High, 3 Slots
Feature
New Gen. Riser Mount for Rifles with Picatinny/Weaver Rail1.6" Long Picatinny Rail with 3 Slots
Side Plate with Spring Tension for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
1.0" Saddle Height with See-through Design
Description
The UTG Hi-Profile compact riser mount. Features: - new Gen. Riser mount for rifles with Picatinny/Weaver rail - 1.6" long Picatinny rail with 3 slots - side plate with spring tension for quick easy installation - precision made from Aircraft aluminum with matte black Anodizing - 1.0" saddle height with see-through design. Specifications: - material: aluminum - weight: 1.7 oz - pieces: 1 - rail type: Picatinny/Weaver - no. Of rails: 1 - length: 1.6 inch - width: 1.6 inch - height: 1.2 inch9. AT3 Tactical PRO-Mount Mini Riser Mount .83 and 1 - for RD-50 Red Dot Sight & Any Picatinny/Weaver Scope (1.0 Inch)
Feature
CHOOSE YOUR MOUNT - .83" Riser for Absolute Cowitness, and 1.0" Riser for Lower 1/3 CowitnessCANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition
LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there!
INSIDE THE BOX - Includes Allen wrench for tightening the riser to your platform
LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right.
Description
The new PRO-MOUNT riser is packed with premium features in a sleek package, without the high-end price tag. It is compatible with many red dot sights, with a single picatinny rail for secure mounting. The cantilever design places your optic further forward, which makes guiding your eye towards your target even faster. The skeletonized body of the sight keeps weight low without sacrificing the strength you need for staying on target in rough conditions. And keep things snag-free, we've switched to a bolt and lock nut for a tight fit that won't get caught on your gear. Available in 2 heights for cowitness, and compatible with our AT3 RD-50 and many other red dot sights!10. UTG 3-Slot QD Lever Mount Adaptor and Riser, Medium Profile
Feature
Most Versatile for Use as QD RiserImmediate Conversion of Any Non-QD Mount Accessories to QD Deployment
Made from Aircraft Aluminum with Matte Anodizing
Recent Comments