Top arduino keypad for 2019
If you looking for arduino keypad then you are right place. We are searching for the best arduino keypad on the market and analyze these products to provide you the best choice.
Best arduino keypad
![Adafruit Membrane 3x4 Matrix Keypad + Extras [ADA419]](https://images-na.ssl-images-amazon.com/images/I/51rmj4sFrCL.jpg)
1. WINGONEER 5Pcs 4x4 Universial 16 Key Switch Keypad Keyboard For Arduino
Feature
8 pins connectorWhite sticker can peel off for adhesive mounting
Maximum Circuit Rating: 35VDC, 100mA
Operation Temperature: 0 to +70 centigrade
Description
WINGONEER trademark Reg.NO:4747611Features:
8 pins connector
White sticker can peel off for adhesive mounting
Maximum Circuit Rating: 35VDC, 100mA
Insulation Resistance: 100M Omh, 100V
Dielectric Withstand: 250VRms (50-60Hz, 1min)
Contact Bounce: <5ms
Operation Temperature: 0 to +70 centigrade
Humidity: 40 centigrade, 90%-95%, 240 hours
Pad Size (L x W): Approx.3 x 2.7 inch / 76 x 69 mm
Transparence Cable Length: Approx. 3.3 inch / 83 mm
Package Included:
5x WINGONEER Membrane Switch
2. Adafruit 3x4 Phone-style Matrix Keypad
Feature
Adafruit Part Number: 1824Stock Type: Sensors >> Touch
In Stock & Ready to Ship
Description
Hey, Jenny, I've got your number! And I'm going to dial 867-5309 into this very nice phone-style matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of plastic with sturdy plastic buttons. The keys are connected to a matrix so you only need 7 microcontroller pins (3-columns and 4-rows) to scan through the pad.
There's a great Matrix Keypad Arduino library that should work great with this item with minor adjustments. It's basically a sturdier version of our Membrane 3x4 Matrix Keypad and comes with 7 or 8 header pins pre-soldered on for easy plugging. Starting from the left there are three column pins, and then to the right are the four row pins. If yours has an 8th pin, its not used and you can just leave it disconnected
3. Diymore 10Pcs 4x4 Matrix Array 16 Key Membrane Switch Keypad 8-pin Keyboard for Arduino/AVR/PIC
Feature
Rebound time 1 (ms).Life of 100 million (times).
Operating Temperature: 60 .
Key Operating Force: 150-200N.
Circuit Rating: 35V (DC), 100mA, 1W.
Description
Description:Contact resistance of 500 ()
Insulation resistance 100M ()
Key Operating Force 150-200N
Rebound time 1 (ms)
Life of 100 million (times)
Operating Temperature 60 ()
Feature:
1, the electronic characteristics
Circuit Rating: 35V (DC), 100mA, 1W
Contact resistance: 10 ~ 500
(Varies according to the lead lengths and different from those of the material used)
Insulation resistance: 100M 100V
Dielectric Strength: 250VRms (50 ~ 60Hz 1min)
Electric shock jitter: <5ms
Life span: tactile type: one million times
2, the mechanical properties
Touch feeling: 170 ~ 397g (6 ~ 14oz)
Switch travel: touch-type: 0.6 ~ 1.5mm
3, the environment parameters
Operating temperature: -40 to +80
Storage temperature: -40 to +80
Temperature: from 40,90% to 95%, 240 hours
Vibration: 20G, max. (10 ~~ 200Hz, the Mil-SLD-202 M204.Condition B)
Package Included:
1 x 4 x 4 Matrix Array 16 Key Membrane Switch Keypad Keyboard for Arduino/AVR/PIC
4. 4 x 4 Matrix Keypad Membrane Switch 8 pins connector SCM Outside enlarge Keypad Compatible With Arduino by Atomic Market
Feature
8P DuPont headpitch 2.54mm
can be inserted in the Pin connection circuit
Peel off the white sticker on the back of the keyboard can be securely affixed to the surface of the chassis
High Quality Atomic Market Product
Description
Manufactured By Atomic Market8P DuPont head, pitch 2.54mm, can be inserted in the Pin connection circuit; Peel off the white sticker on the back of the keyboard can be securely affixed to the surface of the chassis
5. ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice packageThe most economical way to starting Arduino programming for those beginners who are interested
Lcd1602 module with pin header (not need to be soldered by yourself)
This is the upgraded starter kits with power supply module, 9V battery with dc
High quality kite with uno R3, 100 percent compatible with Arduino uno R3
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire
6. Arduino Keypad Shield with 16-Button Matrix Keypad
Feature
Quickly and easily add a keypad to your Arduino project. Just plug it in, link the included Arduino library, and call getNextKeypress() to get each keypress!Mount the keypad directly to your Arduino (hardware included), or use the enclosed RJ45 adapters with your own Ethernet cable to mount the keypad remotely, anywhere!
The shield has stacking headers so it's easy to add another shield or access any of the Arduino's other pinouts to integrate the keypad with the rest of your project.
The shield uses only two Arduino pins (SDA and SCL), keeping the Arduino's other digital and analog pins free for the rest of your project. (16-button keypads normally require 8 pins; the Lectrobox shield has its own onboard ATTiny processor that talks to the keypad for you.)
The shield never misses a keypress, even if your sketch is busy doing other things. (Again, this works because the shield has its own tiny processor that does nothing but scan the keypad.)
Description
Whether you're giving your front door an electronic deadbolt, putting a combination lock on a puzzle box, building a novelty oversized calculator, or adding a launch control panel to your rocketship, there are lots of uses for a keypad in DIY projects! This hardware and software package gives you everything you need to easily attach a high-quality keypad to your Arduino with all the electronic, mechanical and software complexity made simple.
For maximum flexibility, the keypad can be attached to the shield in two ways. First, it can be mounted directly on the shield. Mounting hardware is included. This is a fast and convenient option that keeps the Arduino, shield, and keypad all together in a single unit. Second, it can be mounted remotely. Sometimes, the Arduino and Keypad may need to be in different places-for example, you may want to mount the keypad on the front of a box or next to a door and keep the Arduino itself somewhere else. In this case, attach the included RJ45 dongle to the keypad and connect the keypad to the shield's onboard RJ45 jack with any Ethernet cable.
The keypad itself is high quality, rated for 1 million keypresses and with satisfying key travel. This isn't a cheesy membrane keypad!
For information and instructions, see: lectrobox.com/keypad
7. Velleman 16KEY Keypad 16 Keys Matrix Output
Feature
blister packedDescription
16-KEY KEYPAD - MATRIX OUTPUT
Features:
8. 2pcs Matrix Array 4x4 16 Keys Membrane Switch 8 pins connector Switch Keypad for Arduino/AVR/PIC
Feature
Membrane SwitchMembrane Keypad Switch
Matrix Array 4x4 16 Keys
8 pins connector Switch Keypad
Switch Keypad for Arduino/AVR/PIC
Description
Description:Extended keyboard for development board, can connect easily with cable.
Maximum circuit rating: 35V DC, 100mA.
Insulation resistance: 100M Ohm, 100V.
Dielectric withstand: 250VRms, 50 - 60Hz, 1 min.
Contact bounce: 5ms.
Life expectancy: 1 million closures.
Operating temperature: -20 to +40 C.
Operating humidity: 40C, 90% ~ 95%.
Connector type: 8 pin.
Mount type: adhesive.
Cable length (inc connector):88 mm.
Size:77*69 mm
Package Content:
2Pcs Matrix Array 4x4 16 Keys Membrane Switch 8 pins connector Switch Keypad for Arduino/AVR/PIC
9. Adafruit Membrane 3x4 Matrix Keypad + Extras [ADA419]
Feature
Adafruit Part Number: 419Stock Type: Sensors >> Touch
In Stock & Ready to Ship
Description
Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a matrix, so you only need 7 microcontroller pins (3-columns and 4-rows) to scan through the pad. Check the tutorials tab for links to an Arduino library and example code.
We include a 7-pin extra-long header strip so you can plug this into a breadboard with ease.
10. 4 x 4 Matrix Array 16 Key Membrane Switch Keypad Keyboard for Arduino/AVR/PIC (2-Pack)
Feature
Ultra-thin design & adhesive backing provides easy integration to any projectExcellent price-performance ratio
Easy communication with any microcontroller
(2) Keypads
(2) 8-Pin Arduino Breadboard Header Connector Attachments
Description
This 16-button keypad provides a useful human interface component for micro-controller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications.Application Ideas:
Security systems
Menu selection
Data entry for embedded systems Included are two 8-Pin Header Connector Strip for Arduino
Recent Comments