Top 9 hf qrp radios for 2019
If you looking for hf qrp radios then you are right place. We are searching for the best hf qrp radios on the market and analyze these products to provide you the best choice.
Best hf qrp radios
1. Xiegu X-108G QRP Transceiver Outdoor Version 9 Bands AM/SSB/CW 1-20 watts Black
Feature
Upgrade version ! Host +Handle +2.3khz filter +500Hz CW filter +0.5ppm TCXO Included in the package are the radio, hand PTT Mic with keypad, DC connector, USB CableLow noise, single-conversion superheterodyne receiver. Double-balanced diode mixers provide excellent dynamic range
Receiving sensitivity: 0.25uV (preamplifier open,> 1.8MHz band). Narrow double-tuned band-pass filter covering the realization of all amateur bands (WARC bands).
Built NC APC circuit, the transmission power constant, high control accuracy. Standard 0.5ppm TCXO circuit of high-quality clock source. Narrowband standard 500Hz CW filter. Machine design parameters
Description
Basic parameters/bbrbr Frequency Range: Receive: 0.5 ~ 30MHz (Emissions: All HAM bands)br Work mode: SSB (J3E) / CW (A1A) / AM (A3E)br The minimum frequency step: 1Hzbr Antenna Impedance: 50br Operating temperature range: -10 ~ + 60 br Frequency stability: 0.5ppm @ boot 5 minutes, -10 ~ + 60 br Operating voltage: 12 ~ 14.5V DCbr Current parameters: reception 600mAMax (Emission 7.5AMax)br Machine size: 120 * 45 * 180 (mm) [not including knobs, handles, and other prominent]brbrTransmitter/bbrbr Transmit power: 20W (@ 13.8V)br Mode: SSB balanced modulator, AM modulated lowbr Spurious rejection: 40dBcbr Carrier suppression: 45dBcbr Selective: SSB 2.4kHz (-6dB), CW 500Hz (-6dB)brbrReceiver/bbrbr IF frequency: 10.7MHzbr Receiving sensitivity: 0.5uV (PRE ON, 2.0MHz), 0.3uV (PRE ON,> 2.0MHz)brbr Reception band:br 1.8 ~ 2.0MHzbr 3.5 ~ 4.0MHzbr 5.0 ~ 5.5MHzbr 7.0 ~ 7.3MHzbr 10.0 ~ 10.2MHzbr 14.0 ~ 14.5MHzbr 18.0 ~ 18.2MHzbr21.0 ~ 21.6MHzbr 24.8 ~ 25.0MHzbr 28.0 ~ 28.8MHzbr 0.5 ~ 30.0MHz (*)brbr Dynamic range: better than 90dBbr RIT frequency tuning range: 1kHzbr Audio output: 0.5W@8 ohmbrbrPackage List/bbrbr 1x X-108G HF Transceiverbr 1x PTT Micbr 1x Power cablebr 1x USB cablebr 1x Manual 1. Installation problem in the factory. Some devices may be installed wrongly on internal wires or accessories, this may lead the machine turns off by itself or become warm during working. 2. Low quality of components which used to produce this product. Uneven quality of materials which are used to produce this product may lead some machines get noise during transmitting.2. Zowaysoon 45W HF Power Amplifier for QRP Radio FT-817 IC-703 KX3 Enhancing Transmission Power (KX3 + FT-817 adapter+Bare wire,need weld by you)
Feature
1. Operating frequency: 80m 40m 30m-17m 15m-10m2. Work mode: SSB CW AM,RTTY and FM-Reduced duty cycle
3. 5W Input Power, 45W Output Power
4. Power Requirements: 13.8V 8A///Antenna Interface: SO-239 50
5. MX-P50A hf power amplifier, for QRP transceiver, Improve signal. Can be used bothas a base and mobile unit, Extremely Small Compact and light weight, Full integrationwith the FT-817 using the supplied interface cable, The amplifier incorporatesvarious protection circuits such as high VOLTAGEfront mounted LED display
Description
MX-P50M hf power amplifierfor QRP transceiverImprove signalCan be used bothas a base and mobile unit, Extremely Small Compact and light weight
Full integrationwith the FT-817 using the supplied interface cable,
The amplifier incorporatesvarious protection circuits such as high VOLTAGEfront mounted LED display
This amplifier can be successfully used with other QRP rigs such as the ICOMIC-703(and Elecraft KX3).
YAESU FT-817ND Quick operating manual:
1. Connect power cord to DC power supplier, Red to "+", Black to" -"
2. Connect ACC cable to FT-817 ACC and amp
3. Adjustment "BAND ADJ" buttonSelect the band.
4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out.Notice! Theantenna you used that should well tuned, the SWR should less than 1:1.5
5. Open the power on both power supplier and AMP. The power indicate on.
6. Power on FT-817, the band indicate on Amp shoule be on.
7.Press PTT, the TX indicate on Amp should be on.
Notice! If working onFM or SSTV for long operating time, should lower the output power on FT-817,say 2.5W or 1W.
Other QRP transceiver operating manual:connect acc cable to transceiver PTT-TX and amplifierACC green to"GND"REDTO"TX-PTT"the radio "TX-PTT"view manual.
Specifications
Frequency Band80m40m30m-17m 15m-10m
Operating ModesSSB CW AMRTTY and FM-Reduced duty cycle
Rf input5WOut
power40-50W
Band modeManual
Power requirement13.8V(11-15V) 8ARED "+"BLACK "-"
Cooling method:passive air cooling
Antenna connectorSO-23950
Size155*100*35mmD*W*H
Weight0.55KG
3. WINDCAMP Portable Windom Antenna QRP Ft-817 Eleacraft KX3 Quad-Band Portable shortwave Portable HF Antenna 40m 20m 10m 6m
Feature
New upgrade !! WA-4 portable shortwave antenna quad band Windom (7MHz/14MHz/28MHz/50MHz)1.Black color, new waterproof, ultraviolet-proof balun design.Easy to set up the base
2.Same function, better performance.
3.40m (7MHz) / 20m (14MHz) / 10m (28MHz) / 6m (50MHz) quad-band natural resonant, high efficiency.
4.The Fairy 2.3 is a typical Windom type antenna that can operate at 40meters, 20 meters, 10 meters,6 meter band making it an ideal portable antenna.
Description
Description:Covington (Windom) antenna is an off center fed dipole.
The Fairy 2.3 is built with 16 AWG (about 1.5 mm2)multi-strand copper wire, balancing performance and portability.
The design was optimized for portable outdoor utilizing a lightweight balun support, nylon end insulators.
As a result the antenna is strong and light weight. The antenna comes tested and ready to use.
An erected height of 6-7 meters(19-22feet) is appropriate, lower height will affect the antenna voltage standing wave ratio (VSWR).
The Fairy 2.3 has bullet style quick connects at both ends and is supplied with 2 matching terminal.
These can be used to add wire to the overall antenna to fine tune the VSWR if needed.
Parameter:
1. Band:40m(7MHz)/20m(14MHz)/10m(28MHz)/6m(50Mhz)
2. SWR:2.0
3. Impedance:50ohm
4. Power:100W PEP
5. Irradiator:16AWG stranded copper wires
6. Outlet:SL16(M)
7. Balun:4:1(Balanced-unbalanced magnetic balun)
8. Package size:230*170*80mm(W*D*H)
9. Gross Weight0.9kg
package:
Barron x 1, the reel x 1, oscillator x 1 pair, receive bag x 1, oscillator tuning accessories x 1
4. Yaesu FT-818 Radio and Accessory Bundle - 3 Items - Includes FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver, LDG Z-817 Automatic Antenna Tuner, and Ham Guides TM Quick Reference Card
Feature
Bundle Includes:Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
LDG Z-817 Automatic Antenna Tuner
Ham Guides TM Quick Reference Card
Description
Tired of looking at all of the parts, trying to figure out what works together? We've been there at one point, so we figured we would make it easier for you! Whether you're a new ham looking to get on the air for the first time or an experience ham, these kits make it easy to get everything you need!Get on the air now with our pre-bundled kits!
Bundle Includes:
- Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
- LDG Z-817 Automatic Antenna Tuner
- Ham Guides TM Quick Reference Card
The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.
The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity - 9.6v/ 1900mAh. The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (0.5ppm).
The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier "R.I.T"; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization); AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS); Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors; Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on.
The FT-818 must have the batteries in when using the adapter.
5. Yaesu FT-818 Radio and Accessory Bundle - 4 Items - Includes FT-818 HF/VHF/UHF QRP Transceiver, RT Systems Programming Kit, Nifty! Accessories Mini-Manual, and Ham Guides TM Quick Reference Card
Feature
Bundle Includes:Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
RT Systems Programming Software/Cable Kit
Nifty! Accessories Mini-Manual
Ham Guides TM Quick Reference Card
Description
Tired of looking at all of the parts, trying to figure out what works together? We've been there at one point, so we figured we would make it easier for you! Whether you're a new ham looking to get on the air for the first time or an experience ham, these kits make it easy to get everything you need!Get on the air now with our pre-bundled kits!
Bundle Includes:
- Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
- RT Systems Programming Software/Cable Kit
- Nifty! Accessories Mini-Manual
- Ham Guides TM Quick Reference Card
The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.
The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity - 9.6v/ 1900mAh. The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (0.5ppm).
The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier "R.I.T"; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization); AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS); Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors; Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on.
The FT-818 must have the batteries in when using the adapter.
6. FidgetFidget Amplifier 45W HF Power For YASEU FT-817 ICOM IC-703 Elecraft KX3 QRP Ham Radio
Description
Specifications :
- Frequency Band: 80m 40m 30m-17m 15m-10m
- Operating Modes: SSB CW AM
- Rf input: 5W
- Out power: 45W
- Band mode: Encoder Manual, ACC auto
- Power requirement: 13.8V 8A
- Cooling method:passive air cooling
- Antenna connector: SO-239 50Ohm
- Size: 120*84*38mm L*W*H
- Weight: 0.55KG
7. HF Power Amplifier For YASEU FT-817 ICOM IC-703 Elecraft KX3 QRP Ham Radio
Feature
HF power amplifierfor QRP transceiver Improve signalCan be used both as a base and mobileunit,Extremely Small Compact and lightweight Full integration with the FT-817 using the supplied interface cable,This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3).
Using : Press encoder 3 seconds or more power, the default manual mode, you can switch the band rotary encoder; short press coder into the automatic mode, the automatic mode indicator lights, the band switching control by external ACC line; press the encoder over 3 seconds shutdown
Frequency Band80m 40m 30m-17m 15m-10m , Operating ModesSSB CW AM
Rf input5W ,Out power45W
Description
SpecificationsFrequency Band80m 40m 30m-17m 15m-10m
Operating ModesSSB CW AM
Rf input5W
Out power45W
Band modeEncoder Manual, ACC auto
Power requirement13.8V 8A
Cooling method:passive air cooling
Antenna connectorSO-239 50
Size120*84*38mmL*W*H
Weight0.55KG
Package list:
1x AMP
1x Power cord
1x for FT-817ND ACC control cable
8. 45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 Elecraft KX3 QRP Ham Radio
Feature
hf power amplifierfor QRP transceiver Improve signalCan be used both as a base and mobileunit,Extremely Small Compact and lightweight Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGEfront mounted LED display.This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3).
YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment "BAND ADJ" button Select the band.
4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on.
7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W.
Description
Other QRP transceiver operating manual:connect acc cable to transceiver PTT-TX and amplifierACC green to"GND"RED
TO"TX-PTT"the radio "TX-PTT"view manual.
Specifications
Frequency Band80m 40m 30m-17m 15m-10m
Operating ModesSSB CW AM RTTY and FM-Reduced duty cycle
Rf input5W
Out power45W
Band modeManual
Power requirement13.8V 8A RED "+" BLACK "-"
Cooling method:passive air cooling
Antenna connectorSO-239 50
Size155*100*35mmD*W*H
Weight0.55KG
Package list:
1x MX-P50M
1x Power cord
1x for FT-817ND ACC control cable
9. Yaesu FT-818 Radio and Accessory Bundle - 5 Items - Includes FT-818 HF/VHF/UHF QRP Transceiver, Soft Vinyl Case, DTMF Microphone, MFJ-1899T Multiband Antenna, and Ham Guides TM Quick Reference Card
Feature
Bundle Includes:Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
Yaesu CSC-83 Soft Vinyl Case
Yaesu MH-36E8J DTMF Microphone
MFJ-1899T Multiband (80-6m) Antenna
Description
Tired of looking at all of the parts, trying to figure out what works together? We've been there at one point, so we figured we would make it easier for you! Whether you're a new ham looking to get on the air for the first time or an experience ham, these kits make it easy to get everything you need!Get on the air now with our pre-bundled kits!
Bundle Includes:
- Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
- Yaesu CSC-83 Soft Vinyl Case
- Yaesu MH-36E8J DTMF Microphone
- MFJ-1899T Multiband (80-6m) Antenna
- Ham Guides TM Quick Reference Card
The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.
The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity - 9.6v/ 1900mAh. The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (0.5ppm).
The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier "R.I.T"; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization); AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS); Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors; Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on.
The FT-818 must have the batteries in when using the adapter.
Recent Comments