Top 9 best solenoid push pull small: Which is the best one in 2019?
When you want to find solenoid push pull small, you may need to consider between many choices. Finding the best solenoid push pull small is not an easy task. In this post, we create a very short list about top 9 the best solenoid push pull small for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 solenoid push pull small:
Best solenoid push pull small
1. TAKAHA Push Pull Solenoid DC 12v Stroke 35mm Force 160g Duty Cycle 100% CH12840123 Made in Japan
Feature
Voltage: DC 12 V, Stroke: 1.38 in, Force: 1.6 N, Current: 1 APower: 12 WDuty Cycle: Continuous Duty, Body Size: 1.18*1.5*3.27 in, Weight: 16.9 oz
Lead Wire Length : 7.09 in, Package Included: 1x DC solenoid
Operating Temperature : -5 - 40 Celsius non-condensing
Description
Long stroke solenoid have 35 mm stroke. You can use it as both of push and pull solenoids. Long stroke solenoids work at any points that coventional solenoids don't work such as Industrial equipments etc.2. Small Push-Pull Solenoid - 12VDC
Feature
Adafruit Part Number: 412Stock Type: Robotics & CNC >> Robotics
In Stock & Ready to Ship
Description
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other) This solenoid in particular is fairly small, with a 30mm long body and a 'captive' armature with a return spring. This means that when activated with up to 12VDC, the solenoid moves and then the voltage is removed it springs back to the original position, which is quite handy. Many lower cost solenoids are only push type or only pull type and may not have a captive armature (it'll fall out) or don't have a return spring. This one even has nice mounting tabs, its a great all-purpose solenoid. To drive a solenoid you will need a power transistor and a diode. You will need a fairly good power supply to drive a solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 250mA, so don't try to power it with a 9V battery 12 VDC operation (please note lower voltage results in weaker/slower operation) - 250mA current draw Push or pull type with 5.5 mm throw DC coil resistance: 40 ohms 5 Newton starting force (12VDC) 1.4 ounces / 39 grams3. Adafruit 413 Push-Pull Solenoid, Large, 12VDC
Feature
Diameter: 1.14 inchOverall length: 2.8 inch
5.1 oz/ 144 grams
Description
Solenoids are similar to electromagnets: composed of a large coil of copper wire with an armature (a cylinder of metal) in the center. When the coil is powered, the armature is pulled into the center of the coil. This allows the solenoid to pull (from one end) or push (from the other). this solenoid is pretty strong with a 40mm long body and a" captive" armature with a return spring. This means when energized with up to 24Vdc, the solenoid moves and when the voltage is removed, it springs back to the original position. Many lower cost solenoids are only one Type, push or pull, and may not have a captive armature (it just falls out) or doesn't have a return spring. This one even has 4xm3 (metric) threaded mounting holes in the bottom for easy mounting. To drive a solenoid you will need a power transistor and a diode, check this diagram for how to wire it to an arduino or other microcontroller. You will need a fairly good power supply to drive a solenoid because a lot of current will rush into the solenoid to charge up the electro-magnet, about 100MA, so don't try to power it with a 9V battery! 24 DC operation (you can use 9-24 DC Volts, but lower voltage results in weaker/slower operation). push or pull Type with 10 mm throw. DC coil resistance: 43 ohms. 15 Newton starting force (24Vdc/50 percent duty cycle).4. Uxcell a14032200ux0084 Push Pull Type Electric Electromagnet Solenoid, DC 12V, 2.1 kg Force, 10 mm
Feature
Product name : electromagnet solenoid; rated : DC 12V; Type : push pullForce & stroke : 10 mm 2. 1kg/4. 6 lb.; body Size : 30 x 15 x 13mm/1. 2" x 0. 6" x 0. 5"(L*w*h); plunger bar Size : 55 x 5mm/2. 2" x 0. 2"(L*d)
Plunger Hole : 2mm/0. 08"; wire Length : 20cm/7. 8"; mounted Hole DIA : 2mm/0. 08"
Mounted Hole distance : 15mm/0. 6 inch
Weight : 42G; package content : 1 x electromagnet solenoid
Description
Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet. ; DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility; household appliance, mechanical, etc. Notice: please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using electricity, so as not to damage the electromagnet.5. Uxcell a14092600ux0438 Open Frame Actuator Linear Mini Push Pull Solenoid Electromagnet, DC 4.5V, 40 g/2 mm
Feature
Product name: DC solenoid electromagnet; rated Voltage: DC 4. 5V; Type: push pullForce and stroke: 40G/2mm; energized rate: 25 percent ; body Size: 20 x 12 x 11 mm / 0. 8" x 0. 47" x 0. 43"(L*w*t)
Plunger bar Size: 3 x 40 mm / 0. 12" x 1. 6"(D*l); cable Length: 10cm/3. 9"
Material: metal, electronic parts; main color: as picture Shown
Weight: 12G; package content: 1 x DC solenoid electromagnet
Description
DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc. When energized, doing work through pulling in plunger joined object.6. Abletop Push Pull Solenoid DC 12V 35mm Long Stroke Small Electromagnetic Electric Magnet For Automobiles
Feature
Electrician pure iron shell, less residual magnetism, integrated molding, stronger magnetic permeabilityBuilt-in core, more conductive and low power consumption
Power-driven core load off by the spring return(Please note, relatively soft springs, only the iron core reset) Push nut convenient headband fixed object, such electromagnet by impact work. Inertial force huge impact.
Suitable For: Vending machines, transport equipment, office facility household appliance, mechanical, etc.
Three months can be returned, half a year can be exchanged
Description
Rated voltageDC12V
Current: 8A
Usage range: Wide range of use, home appliances, vending machines, game consoles, car door locks.
Package include: 1pc x Small electromagnetic Electric Magnet
Note:
Please note that as an automation device actuator. Because the current, single-cycle not long power for point formula work. Single power work time within 2 seconds of the best! Long energized coil will cause a short circuit is similar to artificial electromagnet overheat temperature is too high will affect the life of the electromagnet.
7. Uxcell Push Pull Type DIY DC Electromagnet Magnet Solenoid, 10 mm 6N DC 6V 0.8A
Feature
Country of manufacture: China; material: metal, electronic partsNet weight: 45G; package content: 1 x DC solenoid electromagnet
Model: fj-0630b; electrical Rating: DC 6V, 0. 8A
Type: push Type; force & stroke: 6N, 10mm
Body Size: 30 x 16 x 20mm/1. 2" x 0. 64" x 0. 8"(L*w*h); screw Hole diameter: 3mm
Description
Pull push Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet. DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc. Notice: please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using electricity, so as not to damage the electromagnet.8. Saim DC12V 25N Force 2-Wires Pull Push Solenoid Electromagnet, 10 mm Actuator
Feature
Product name : DC solenoid electromagnet; model : jf-1040b; rated Voltage : DC 12VType : pull push; rated current : 400mA; force & stroke : 25N/10mm
Body Size : 40 x 29x 25 mm / 1. 6"X 1. 1"X 1"(l*w*t); plunger bar Size : 10 x 74 mm / 0. 4"x 2. 9"(Max. D*l);
mounting Hole DIA. : 2. 5mm/ 0. 14"; Cable Length : 19 cm / 7. 5 inch
Package content : 1 x DC solenoid electromagnet
Description
Pull push Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet.DC solenoids electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc.
Solenoids of this category work externally through pulling pushing in plunger.
When energized, doing work through pulling pushing in plunger joined object.
9. uxcell JF-0826B DC 6V 2A 20N 10mm Pull Push Type Open Frame Linear Motion Solenoid Electromagnet
Feature
Force: 20N; Travel: 10mmCable Length: 190mm / 7.48"; Rated Voltage: DC 6V;Current: 2A
Size: 26 x 22 x 25mm / 1.02" x 0.87" x 0.98" (L*W*H)
Push Bar Dia: 7.3mm / 0.29";Total Length: 55mm / 2.17"; Mounting Hole Dia.: 2.6mm / 0.1"
Package Content: 1 x DC Solenoid Electromagnet
Description
Description:Push pull Type, linear motion, plunger spring return, DC solenoid electromagnet.
Support DC 6V voltage, high power, pull push type, linear motion, is easy to install.
DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility,household appliance, mechanical, etc.
Note:
Please pay attention:As an actuating element of anautomation equipment,because the current is large, the single cycle can not be electrified for a long time.The bestoperate time is in 2seconds.If theoperate time is too long,theelectromagnettemperature will rise.Too high temperature can affect the life of the electromagnet.
Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using electricity, so as not to damage the electromagnet.
Recent Comments