Top 9 arc flash suit for 2019
If you looking for arc flash suit then you are right place. We are searching for the best arc flash suit on the market and analyze these products to provide you the best choice.
Best arc flash suit
1. TCG2P Series Ultralight Premium Arc Flash Kits
Feature
Meets and exceeds NFPA 70E PPE Category 2 standards and has an ATPV rating of 12 cal/cm2.Arc flash suit set comes equipped with a True Color Grey hard cap and shield, balaclava, coveralls, and storage bag. The balaclava and coveralls are made from an inherently flame resistant fabric.
Color Navy Blue
Size XL
Description
TCG2P Series ultralight premium arc flash kits meet and exceed NFPA 70E PPE Category 2 standards and have an ATPV rating of 12 cal/cm2.2. CAT4 Series Arc Flash Hood & Coverall Suit Set
Feature
Meets and exceeds NFPA 70E PPE Category 4 standards and has an ATPV rating of 41 cal/cm2.Arc flash suit set comes equipped with a flame resistant treated cotton hood and coverall. The hood includes a True Color Grey shield for maximum color acuity.
Color Khaki
Size XL
Description
CAT4 Series arc flash suit sets meet and exceed NFPA 70E PPE Category 4 standards and have an ATPV rating of 41 cal/cm2.3. National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Kit with Leather Protectors, Max. Use Voltage 1,000V AC/ 1,500V DC (KITGC009)
Feature
KIT INCLUDES: Pair of Class 0 Rubber Voltage Insulating Gloves; Pair of 10" Leather Protectors for gloves; Glove bag for easy storageTESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1,000V AC/ 1,500V DC and is newly tested and stamped with test date; Rubber Voltage Insulating Gloves should be worn with leather protectors
COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash; CSA Z462-15 compliant for arc flash (Canada); ANSI/ASTM D120, Class 00, Type 1; Max use voltage 1,000V AC/1,500V DC
ENHANCED PROTECTION - Ideal for arc flash & general FR applications; Utility Workers; Linemen; Constuction Workers; Power Generation; Electricians; Electrical Cooperatives; Contractors
SIZING - Available in sizes 8-12; To ensure you're ordering the correct glove size, measure the circumference around your palm.
Description
National Safety Apparels Class 0 Rubber Voltage Insulating Glove Kits are made with an insulating rubber that offers protection up to 1000 Volts AC/1500 Volts DC. These gloves are made of type 1 rubber and are available in sizes 8 to 12.Arc flash hand protection in one bag The Class 0 Rubber Voltage Insulating Glove Premium Kit Includes:
- 1 pair of newly tested Class 0 rubber voltage insulating gloves
- 1 pair of 10 leather protectors
- 1 glove bag for convenient storage
Selecting the Correct Size To ensure you are ordering the correct glove size, measure the circumference around your palm. If you are in between sizes, we recommend ordering the larger size.
Protection at your fingertips Protect yourself from electrical shock and other arc flash hazards with these flexible gloves that are easy to work with. Perfect for any job requiring Class 0 protection including utilities, electricians, linemen, construction, power generation, electrical cooperatives, and contractors.
Stay Compliant Always be sure you are wearing the correct level of protection while on the job. These Class 0 Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash, CSA Z462-15 compliant for arc flash (Canada), and meet ANSI/ASTM D120.
Important information on testing & retesting Gloves must be put into use within one year of test date. If one year has passed since the gloves have been tested and they have not been open, they must be sent back for retesting. Once gloves are issued for use, they must be retested within 6 months from the date they were distributed to employees.
Cleaning, Storage, and Inspection Rubber voltage gloves should be cleaned in warm water with mild soap. When not in use, lay flat in protective bag do not fold gloves. Avoid storing in areas with high heat or high moisture. Gloves should not be placed in direct sunlight. Inspections should occur before each use. Inspection methods are outlined in ASTM F1236.
Technical specs:
- Material: Type 1 Rubber
- Glove Sizes: 8-12
- Maximum Use Voltage: 1000V AC/ 1500V DC
Standards & Testing:
- Meets ANSI/ASTM D120
- NFPA 70E-2015 Compliant for Arc Flash
- CSA Z462-15 Compliant for Arc Flash (Canada)
4. HRC2 Series Economy Arc Flash Kit
Feature
Meets and exceeds NFPA 70E PPE Category 2 standards and has an ATPV rating of 8 cal/cm2.Arc flash suit set comes equipped with a True Color Grey hard cap and shield, balaclava, coveralls, and storage bag. The balaclava and coveralls are made from a flame resistant treated cotton.
Color Khaki
Made in the USA
Description
Arc flash suit set comes equipped with a True Color Grey hard cap and shield, balaclava, coveralls, and storage bag. The balaclava and coveralls are made from a flame resistant treated cotton.5. National Safety Apparel KIT2CVPR08BLG09 ArcGuard DuPont Protera Arc Flash Kit with Coverall and Balaclava, 8.5 Calorie, Large, Size 9, Khaki
Feature
Glove color may varyArcGuard Arc Flash Kit
Kit Includes: FR DuPont Protera Coverall; Balaclava; Hard Hat with Arc Flash Face shield & Chin Cup; Safety Glasses; Class 0 Voltage Rated Gloves; Glove Protectors
Stores in convenient Gear Bag
(Arc Rating=8.5 cal/cm) HRC 2
NFPA 70E Compliant; Meets OSHA 1910.269
Description
ArcGuard Arc Flash Kit with Coverall, Gloves & Balaclava. Kit Includes: FR DuPont Protera Coverall; Balaclava, Hard Hat with Face shield & Chin Cup; Safety Glasses; Voltage Rated Gloves; Glove Protectors (Arc Rating=8.5 cal/cm) HRC 2. NFPA 70E Compliant.6. Magid N1540 A.R.C. Cotton Arc-Resistant Coverall, Mandarin Collar, Extra-Large, Navy Blue
Feature
Nomex thread to protect from Arc flash hazardsFlame resistant
9 oz/sq yards 100 percent sateen twill fabric
Several pockets reinforced with bar tacks for added durability
Concealed closures
Description
Magid A.R.C. 1540 Arc-Resistant Coverall is flame resistant and specially treated and constructed with Nomex thread to protect workers from Arc flash hazards. The 1540 Arc clothing coveralls are available in khaki, navy, or green and meet the following standards: NFPA 70E HRC 2 (10.0 cal/cm), ASTM F1506-02A, and ASTM F1959M/F1959M-99. These Arc Flash coveralls are made of 9 oz/yd 100% cotton sateen fabric and feature several pockets all reinforced with bar tacks for durability - 2 hip, 2 back, 1 ruler, 1 inside patch, and 1 front pass-through. All closures are concealed for easy on/off. A mandarin collar provides added protection to this heavy duty Arc Flash Suit.
Closure : Snaps
Clothing Type : Coveralls
Color : Navy
Compliance : NFPA 70E HRC/CAT 2 ASTM D6413,NPFA 70E CAT2
Fabric Weight : 9 oz.
Material : Flame Resistant 100% Cotton
Material Weight : 9 oz.
Pockets : Yes
Size : XL
Sleeve Cuff : Snap Closure
7. National Safety Apparel KITHP20 ArcGuard Head Protection Kit, 20 Calorie, One Size
Feature
ArcGuard Head Protection KitIncludes Anti-Fog Faceshield Unit & Hard Hat, Faceshield Unit Bag, Balaclava, and Safety Glasses
(Arc Rating=20 cal/cm) HRC 2
Description
ArcGuard Head Protection Kit with Anti-Fog Faceshield Unit and Hard Hat, Faceshield Unit Bag, Balaclava, and Safety Glasses. (Arc Rating=20 cal/cm) HRC 2.8. ARC140 Series Arc Flash Suit Sets
Feature
Meets and exceeds NFPA 70E PPE Category 4 standards and has an ATPV rating of 140 cal/cm2.Suit set is made from an Aramid fabric is lightweight and durable and comes equipped with a hood, coat, and bib overalls.
Color Black
Size L
Description
ARC140 Series arc flash suit sets meet and exceed NFPA 70E PPE Category 4 standards and have an ATPV rating of 140 cal/cm2.9. National Safety Apparel Flame Resistant (FR) UltraSoft Knit Hood, 12 Calorie Arc Rated (H11RY)
Feature
DESIGNED FOR COMFORT & FLEXIBILITY: UltraSoft Knit Balaclava provides flame resistant head protection in a single late; Made from 6.5oz. UltraSoft flame resistant material; Durable, lightweight and flexibleGUARANTEED FLAME RESISTANT - UltraSoft advanced flame resistant fabric - made with a unique blend of 88% Cotton and 12% High Tenacity Nylon that is soft to the touch for greater comfort; enhanced wear life and protective performance; Guaranteed flame resistant for the life of the garment.
MADE IN THE USA - High quality knit balaclava is made from start to finish at our Cleveland manufacturing facility.
COMPLIANT - Arc rating of 12 Cal/cm; HRC/CAT 2; Compliant with ASTM F1506-10a; OSHA 29CFR 1910.269; NFPA 70E-2015 Compliant for Arc Flash; CSA Z462-15 Compliant for Arc Flash (Canada)
ENHANCED PROTECTION - Ideal for enhanced protection from electric arc flash and flash fire exposures, as well as multipurpose protection from electric arc flash and flash fire; Pair with a faceeshield for 360 degree protection; Common applications are: arc flash and general FR applications; Construction; Electricians; Utilities; Electrical cooperative; Power generation; Contractor
Description
Protect your most valuable asset with the flame resistant 6.5 ounce single layer UltraSoft Knit Balaclava providing head protection against arc flash hazards. The high performance moisture wicking material is ideal for warmth and comfort.Designed with comfort in mind This FR balaclava is designed with comfort & flexibility in mind which make it the perfect head base layer. Flat lock seams provide additional comfort especially when worn underneath hard hats. The UltraSoft flame resistant material is also durable and lightweight. Elasticity allows one size to fit most.
Stay safe & compliant With an arc rating of 12 cal/cm2 and HRC/CAT 2, our UltraSoft Knit Balaclavas comply with relevant safety standards: ASTM F1506-10a; OSHA 29 CFR 1910.269; NFPA 70E-2015 compliant for Arc Flash; CSA Z462-15 compliant for Arc Flash (Canada)
Fabric technology UltraSoft material is designed with both comfort & safety in mind. The unique blend of 88% FR cotton and 12% high tenacity nylon create a material that is not only comfortable & soft to the touch, but one that fiercely protects. The nylon on the outer surface protects against abrasion to protect the balaclava wear life, while the cotton fibers are focused toward the skin to optimize comfort. The material is guaranteed flame resistant for the life of the garment, and will not melt, drip, or ignite.
Enhanced protection The first garment you put on can be your last line of defense. Protect yourself from electric arc flash and flash fire exposures, as well as multipurpose protection from electric arc flash and flash fire; Common applications for FR/AR balaclavas: arc flash and general FR applications; Construction; Electricians; Utilities; Electrical cooperative; Power generation; Contractor
Made in the USA Our flame resistant UltraSoft Knit balaclavas are manufactured from start to finish in Cleveland, Ohio using the highest quality materials. Since 1935, workers across the country have relied on our quality craftsmanship & innovative solution. We know safety and are always innovating for you.
Technical specs:
- HRC: 2
- Arc rating: 12 cal/cm2
- Color: Navy
- One size fits most
- Country of origin: USA
Standards & Testing:
- Meets ASTM F1506-10a
- NFPA 70E-2015 Compliant for Arc Flash
- CSA Z462-15 Compliant for Arc Flash (Canada)
- Compliant with OSHA 29 CFR 1910.269
Recent Comments