Top 10 sharkbite valve 3/8
If you looking for sharkbite valve 3/8 then you are right place. We are searching for the best sharkbite valve 3/8 on the market and analyze these products to provide you the best choice.
Best sharkbite valve 3/8
1. SharkBite 23036-0000LF 1/2" Ptc x 3/8" Compression Angle Stop Valve,
Feature
Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded compression Angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPerformance: rated to 200 psi and 200 degree f. Use in potable water and hydronic heating applications
Copper, pex, cpvc, pe-rt: SharkBite hose connector inlet fits copper, pex, cpvc and pe-rt pipe and connects them in any combination
Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
SharkBite1/2" X 3/8" Compression Angle Stop Valve
We use high quality DZR Lead Free Brass for our 1/2 x 3/8 Quarter Turn Angle Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
2. SharkBite 22222-0000LFA Ball Valve 1/2 Inch x 1/2 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight sealVERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
LEAD FREE: Made of high quality forged lead free DZR brass.
QUALITY: Only Shark Bite's quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
Description
SharkBite 1/2" Ball ValveSharkBite uses high-quality brass for our 1/2" x 1/2" brass push-to-connect ball valve with a single ball valve handle. The full port ball valve allows water to pass through the valve easily and freely, with the reliable option to turn off the water supply fast! Quick and easy to install a new valve or to fix a leaking water pipe. Our ball valves can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
3. SharkBite 25558LF 1/2-Inch X 3/8-Inch X 3/8-Inch Dual Compression Outlet Shut Off Valve
Feature
Connects to Copper, pex, CPVC, pe-rt or HDPECan be installed with no solder, glue, unions or tools required
Designed for potable water & radiant heating applications without access panels
Rated for 200f & 200 psi
Asme A112.18.1/Csa B125.1-12 Nsf 372 Nsf/Ansi 61
Description
The SharkBite Dual Outlet Stop is a shut off valve designed for running two supply lines, like a dishwasher and kitchen faucet or dual vanity from a single stubout under the sink. This valve can simultaneously serve as a faucet shut off valve and a toilet shut off valve.4. SHARKBITE 25087 FAUCET INSTALLATION KIT
Feature
INSTALLS IN SECONDS: SharkBite Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
SharkBite Faucet Kit with Angle Stop
The SharkBite Faucet Install Kit has everything you need to install a new kitchen faucet or sink. This faucet install kit includes:
- 2x SharkBite 1/2 inch x 1/4 inch (3/8 inch O.D.) Push-to-Connect Angle Stop Valves
- 2x 5 foot 1/4 inch PEX pipe tubing
- 2x 1/4 inch (3/8 inch O.D.) SharkBite Swivel Faucet Connectors
- 1x 1/4 inch Chrome Trim Cover that reverses as a disconnect clip to remove the pipe from the valve if needed.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
5. SharkBite 23382LF PEX Straight Shut Off Valve, 3/8-Inch by 3/8-Inch
Feature
Durable chrome platedQuick and easy 1/4 turn on/off
Used to connect fixture supply lines to PEX tubing
Stainless-steel teeth bite down and grip pipe tightly
Description
CASH ACME 23382LF 3/8''x3/8'' PEX STRAIGHT STOP LEAD FREE6. SharkBite 24984A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 3/8 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
INSTALLS IN SECONDS: 1/2" x 1/2" x 3/8" threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2 x 1/2 x 3/8 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4 compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
7. Cash Acme U514LFA 1/2-Inch SharkBite Lead Free End Cap
Feature
INSTALLS IN SECONDS: 1/2 inch end cap requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealCOPPER, PEX, CPVC: SharkBite end cap plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination
COMPATIBLE PRODUCT: Same as part number U514LFZ and U514LF
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200F and can be reused up to four times
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1/2-Inch Straight Coupling. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
8. SharkBite 23036-0000LF 1/2" Ptc x 3/8" Compression Angle Stop Valve, (Renewed)
Feature
INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
9. SharkBite 23057LF PEX Chrome Plated Straight Stop, 1/2-Inch by 3/8-Inch
Feature
Durable chrome platedQuick and easy 1/4 turn on/off
Used to connect fixture supply lines to PEX tubing
Lead Free Compliant
Description
SharkBite PEX Chrome Plated Straight Stops are 1/4 turn valves that control water flow to household plumbing fixtures, and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves are barb connections that will work with either a stainless steel clamp system or a copper crimp ring system (each sold separately). Size: 1/2" Lead Free Brass Barb Insert x 3/8" OD Finish: Chrome-Plated Lead free chrome-plated DZR brass construction for durability and reliability Quarter-Turn handle for easy on/off flow control For connecting 1/2" cross link polyethylene pex tubing to a 3/8" od supply connector Secure barb end of fitting to pex pipe with model #UC953CP100 Cinch clamps and model #23081 cinch tool, or copper crimp rings and crimp tool Immediately testable to well over 100 PSI Meets the new NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard for products intended for the transport of potable water ANSI/NSF Standard 61 Annex G for lead free compliance The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight Meet AB1953 California and VT S152 Vermont low lead restrictions.10. Toilet Cnnctr 1/2" Push
Feature
Click-seal nut provides an audible click to ensure a sealed connection without the need to use tools to installConnects to copper, PEX, CPVC or PE-RT pipe 1/2 in. inlet and 7/8 in. ballcock outlet
Quarter-turn valve for easy on/off flow control
Maximum Temperature: 200 deg. F
Maximum Pressure: 200 psi
Recent Comments