Top 10 recommendation timer module for beamswork for 2019
When you looking for timer module for beamswork, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable timer module for beamswork is not an easy task. In this post, we show you how to find the right timer module for beamswork along with our top-rated reviews. Please check out our suggestions to find the best timer module for beamswork for you.
Best timer module for beamswork
1. Timer Module for Beamswork or EVO Quad LED Aquarium Light Fixture
Feature
DOES NOT work with Beamswork ET series light fixtures.Compatible with Beamswork EA, DA, DHL, EVO Quad, SE Quad, Green Element EVO models
Auto on and off times for modes 1 and 2
Fixture must be pre-wired and have a time port on the side of the fixture.
Convenient and easy to use.
Description
This add on timer module will allow you to program the on and off times for Mode 1 and Mode 2. Timer module can also power on and off manually. Only works with pre-wired Beamswork, Green Element, and Odyssea fixtures. NOT compatible with Beamswork ET series fixtures.2. Odyssea Beamswork EVO Quad LED Aquarium Light Fixtures Timer Module, Spare Part
Description
The timer Module for odyssea Beamswork EVO Quad LED Aquarium Light Fixturescome from orignal manufacturer
works with pre-wired Beamswork and Green Element fixtures
this timer can program the on and off times for Mode 1 and Mode 2.
Timer can power on and off by manual.
Features:
Dimensions - 3.75" x 1.65" x 1.25"
Power cord - 15.00"
Only works with pre-wired Beamswork and Green Element LED fixtures.
110V - 220V
Press and hold both buttons to set the clock.
Press and hold the left button to set Mode 1.
Press and hold the right button to set Mode 2.
The first setting is to program the ON time. The second setting is to program the OFF time.
3. VIPARSPECTRA Timer Control 165W LED Aquarium Light Dimmable Full Spectrum for Coral Reef Grow Fish Tank
Feature
VIPARSPECTRA Timer Control Series V165 LED Aquarium Light is scientifically engineered to keep the balance of the PAR output and coverage.Internal timer allows you to turn the light on or off automatically and separately. Dimmable feature can be used to adjust two channels brightness individually.
V165 is full spectrum with our proprietary layout, which is contributed by thousands of ReefCentral members, has had years of success.
Suitable for all photosynthetic corals, be sure to acclimate your tank or new corals to the new light by slowing increasing its exposure/intensity to the light.
3 years local warranty plus 30 days satisfaction or return guarantee.
Description
Welcome to the VIPARSPECTRA Timer Control Series V165 Dimmable 165W LED Aquarium Light, with full spectrum layout, built in timer, dimmable ability and advanced heat dissipation system, specially designed to provide perfect lighting environment for all your precious water creatures.
Design:
- Full spectrum that mimic natural light to help corals/fish achieve the best balance.
- Built-in-Timer with two on/off settings one for blue and the other one for white.
- Two channels brightness can be adjusted from 0% to 100% separately.
- Advanced high speed quiet fans and upgraded aluminum heat sinks are easy for heat dissipation.
- One remote in hand, everything is simple.
- Easy adjustable hanging kits.
Specifications:
- Dimensions: 16x8.5x2.4inches
- Item Weight: 6.8 lbs
- One light is ideal for 24x24" coverage
- Max Coverage at 12" height: 30x24"
- Core Coverage at 12" height: 24x24"
- Avg. Power Draw: 110W Max
- (55pcs) High Intensity 3W Bridgelux/Epileds LEDs
- Channel one: Violet(420nm), Royal Blue(450nm), Blue(470nm)
- Channel two: Green(520nm), Red(660nm), Neutral White(6500K), Cool White(12000K)
- Lens Angle: 90
- Input Voltage: AC100-240V
- Frequency: 50-60Hz
- Lifespan: 100,000 hours
Package includes:
1 x Timer 165W
1 x Wireless Remote
1 x User Instruction
1 x 6ft Power Cord
2 x Hanging Kits
Attention please:
- Extremely bright, do not look directly at the LED bulbs when the light is on.
- Indoor use only, not water-proof. No extra ballast is needed.
- APEX does not currently support this product.
- Can not be programmed for sunrise, sunset and moonlight.
- Does not have a shimmering/ storm effects mode setting.
- Can not be daisy chained.
- Can not set up multiple lights by one remote at the same time, have to do it separately.
- Please contact us via Amazon messge for any questions.
4. Current USA Single Ramp Timer for Aquarium
Feature
NATURAL LIGHT SCHEDULE- Inspired by mother nature, the Ramp Timer is a fully programmable 24-hour LED lighting controller that not only turns your lights on and off, but it also simulates a gentle sunrise and sunset for your critters.SIMPLE CONTROLLER- A push button keypad provides an effortless way to pre-program on/off times and the large LCD display is easy on the eyes. Simply program your desired on and off times and choose between two modes: on/off or on/off with a 15 minute ramp up and dim down. A manual button even allows you to turn your lights on or off instantly.
PROGRAMMABLE- At the pre-programmed "on" time, the Ramp Timer slowly begins to mimic a morning sunrise and gently increases the lighting level to full brightness over a period of 15 minutes. When the programmed "off" time is reached, it gradually dims the light over 15 minutes before turning off, simulating a soft dusk to night effect.
BENEFITS- Slowly acclimates animals to the high brightness that LEDs produce. This slow acclimation helps reduce stress often caused by sudden light intensity changes and provides a more natural rhythmic daily light cycle.
30 DAY GUARANTEE-We are so sure you'll be happy with your purchase that we offer a "30-Day Money-Back Guarantee" to ensure customer satisfaction of our Current USA products. If for any reason you wish to discontinue using the products, we will promptly issue a refund.
Description
Simulate a gradual sunrise and sunset every day! the single ramp timer is a fully programmable 24 hour LED lighting controller that not only turns your lights on and off, but also simulates a gentle sunrise and sunset for your critters. Designed for both freshwater and marine aquariums, it's extremely simple to use and slowly acclimates animals to the bright light that LEDS produce. This Slow acclimation helps reduce stress often caused by sudden light intensity changes and provides a more natural rhythmic daily light cycle. At the pre-programmed on time, the single ramp timer slowly begins to mimic a morning sunrise and gently increases the lighting level to full Brightness over 15 minutes. When the programmed off time is reached, it gradually dims the light over 15 minutes before turning off, simulating a soft dusk to night effect.5. Beamswork EA Timer FSPEC LED Aquarium Light Freshwwater Plant Extendable (80cm - 30")
Feature
LEDs: 36x 0.50W (1700 lumen)Config: 25x 10000K, 6x Actinic 460nm, 3x Red 620nm, 2x Green 520nm
Timer Ready, 2 Mode Day / Night
Suitable for freshwater, plants, cichlid
1 Year Warranty*
Description
The Beamworks Freshwater Full Spectrum (FSPEC) LED fixture provides a high quality, energy efficient light fixture that replaces the typical single tube fluorescent light. Fixture is pre-installed with 10000K, Actinic 460nm, Red 620nm, and Green 520nm spectrum LEDs. The Beamworks LED is a sleek and contemporary light fixture that will make any other aquarium light look boring. Long lasting LEDs with no bulb replacement required. Extendable brackets allows fixture to adjust to different lengths. Two mode operation allows full power during the day and moonlight mode during the night. Each fixture is pre-wired to be used with an optional timer module (sold separately). Power supply (Driver) is compatible with 110V to 220V power source. Users outside of North America may need an adapter for proper outlet fitting.6. Beamswork 48" DA 120 6500K LED Aquarium Light Pent Freshwater Plant Discus 120x 0.50W
Feature
Lumen: 5200LEDs: 120x 0.50 watt
Config: 104x 6500K, 16x Actinic
2 Modes: All on / 16x only
Timer Ready
Description
The latest DA series by Beamworks provides a high quality, energy efficient light fixture that replaces the typical single or dual tube fluorescent lights. This plant version is fitted with 6500K spectrum LEDs that are commonly used for planted freshwater setups. LEDs are fitted in a sleek and razor-thin fixture that will make any other aquarium light look boring. Long lasting LEDs with no bulb replacement required. Fixture is pre-wired for use with the optional timer module to program on and off times.7. Beamswork EA Timer 6500K 0.50W LED Aquarium Light Freshwater Plant (80cm - 30")
Feature
Lumen: 1750LEDs: 36x 0.50W
Config: 30x 6500K, 6x Actinic 460nm
Timer Ready, 2 Mode Day / Night
Suitable for freshwater, plants, cichlid, discus, tetra
Description
The EA 6500K series is the latest 2016 offering by Beamswork. Fixture is fitted with 0.50W power LEDs that output higher lumens while using less LEDs. The purpose of being eco-friendly simply put. This model is pre-wired to be used with Beamswork timer module. Users can program the ON and OFF times for modes 1 and 2. Extendable brackets can accomodate and adjust to fit most aquariums. Suitable for freshwater aquariums. Fixture can be used with power source 110V to 220V.8. Beamswork DA FSPEC LED Aquarium Light Pent Freshwater 0.50W (120cm - 48")
Feature
Lumen: 5200LEDs: 120x 0.50W
Config: 86x 10000K, 16x Actinic 460nm, 9x Red 620nm, 9x Green 520nm
Timer Ready, 2 Mode Day / Night
Suitable for freshwater, plants, cichlid
Description
The latest Beamworks DA FSPEC series LED fixture provides a high quality, energy efficient light fixture that replaces the typical single tube fluorescent light. Fixture is pre-installed with 10000K, Actinic 460nm, Red 620nm, and Green 520nm spectrum LEDs. The Beamworks LED is a sleek and contemporary light fixture that will make any other aquarium light look boring. Long lasting LEDs with no bulb replacement required. Two mode operation allows full power during the day and moonlight mode during the night. Each fixture is pre-wired to be used with an optional timer module (sold separately). Power supply (Driver) is compatible with 110V to 220V power source. Users outside of North America may need an adapter for proper outlet fitting.9. BeamsWork EA 180 Timer 0.50W 72" LED Aquarium Light White Blue
Feature
Lumen: 3600LEDs: 78x 0.50W
Config: 66x 10000K, 12x Actinic 460nm
Timer Ready, 2 Mode Day / Night
Suitable for freshwater, plants, cichlid
Description
The EA Timer Ready series is the latest 2016 offering by Beamswork. Fixture is fitted with 0.50W power LEDs that output higher lumens while using less LEDs. This fixture is re-defining what it means to be eco-friendly. This model is pre-wired to be used with Beamswork timer module. Users can program the ON and OFF times for modes 1 and 2. Extendable brackets can accomodate and adjust to fit most aquariums. Suitable for freshwater aquariums. Fixture can be used with power source 110V to 220V.10. BeamsWork EA 120 Timer 0.50W 48" LED Aquarium Light White Blue
Feature
LEDs: 54x 0.50W (2500 lumen)Config: 45x 10000K, 9x Actinic 460nm
Timer Ready, 2 Mode Day / Night
Suitable for freshwater, plants, cichlid
90 Day Warranty
Recent Comments