Top 10 recommendation jaw puller 2 2019
When you looking for jaw puller 2, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable jaw puller 2 is not an easy task. In this post, we show you how to find the right jaw puller 2 along with our top-rated reviews. Please check out our suggestions to find the best jaw puller 2 for you.
Best jaw puller 2
1. OTC (1022 Mechanical Grip-O-Matic Puller - 2 Ton, 2 Jaw (Reversible Jaws)
Feature
2 ton capacity, 2 jaw, reversible jawsMaximum reach of 3-1/4 inches
Maximum spread of 4 inches
Upper jaw thickness is 3/16 inch, lower jaw thickness is 1/8 inch
Upper jaw width is 1/4 inch, lower jaw width is 1/2 inch
Description
The OTC 1022 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.2. ABN 6" Inch 2-Jaw Gear Puller Removal Tool for Gears, Pulley, and Flywheel
Feature
DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller - Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-freeBUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
Description
Safely remove gears, sprockets, bearings, pulleys, and flywheels with the ABN 6" Inch 2-Jaw Gear Puller. This tool features reversible jaws for inside and outside pulling and has 8 different positions, which gives you maximum versatility. It can be set for short reach, standard reach, long reach, or extra-long reach positions. You can use any 17mm hand wrench, ratchet, or combination spanner on the 7-inch (17.8cm) tall hex head screw for gear or bearing removal. Even if you need to pull rusted bearings, this will get the job done. You can even use it on tie rod ends or other suspension/steering applications. The 8.75-inch (22.2cm) jaw spread and 4.75-inch (12.1cm) jaw reach along with the forged and hardened steel construction will help you pull gears with zero damage. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.3. Pro-Grade 18218 6-Inch Reversible 2 & 3 Jaw Gear Puller
Feature
Long lasting durability and performanceExceeds A.N.S.I. or U.S. Federal Specifications for quality and performance
Backed by an unconditional replacement warranty for the life of the tool
Best value available in professional quality hand tools.
Premium quality hand tool
Description
For nearly 40 years, allied International has been committed to satisfying what you look for in hand tools. We stand behind everything we build and a guaranteed forever warranty for the life of the product. Pro-Grade wrenches are built to stand up to the toughest work conditions. Combinations, open end and flare nut styles are hot drop-forged from chrome vanadium Alloy, then heat treated for optimum strength. Box ends are precision Broached and chamfered for a smooth, secure fit and featured the dyne-drive torque system which dramatically improves performance when compared to conventional wrench driving systems. The board, flat paneled beams are smooth edged, then nickel-chrome plated and polished to a mirror finish. This allows the application of up to 20% more driving torque with no slippage or fastener damage. In addition, many fasteners with existing rounded corners can now be worked more easily. The results are a wrench that instantly conveys a message of exceptional quality and workmanship.4. OTC (1025 Mechanical Grip-O-Matic Puller - 5 Ton, Long 2 Jaw (Reversible Jaws)
Feature
5 ton capacity, long 2 jaw, reversible jawsMaximum reach of 5-1/2 inches
Maximum spread of 6 inches
Upper jaw thickness is 5/16 inch, lower jaw thickness is 1/4 inch
Upper jaw width is 3/8 inch, lower jaw width is 3/4 inch
Description
The OTC 1025 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.5. Performance Tool W84500 4-Inch 2 Jaw Gear Puller
Feature
Heat treated alloy steelDrop forged for strength
Chrome plated finish
Description
Wilmar W84500 4 In. 2 Jaw Gear Puller made of heat treated alloy steel, drop forged for strength with a chrome plated finish. 4 inch 2 jaw puller.6. OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532
Feature
Push puller is the best pulling choice when threaded holes are not availableSolution for many applications like heavy-duty pinion bearings side bearings alternators generators power steering and crankshaft pulleys timing gears and harmonic balancers
A bearing/pulley tool solution featuring a classic H Bar style puller block accommodating 7 inch to 11 inch application spread
Comes with 2 sets of forged jaws for a pulling reach range of 5 inch to 9 inch and two forcing screws are included for short and long pulls
Tempered for heavy-duty applications
Description
The OTC 7-Ton Multi Purpose Bearing and Puller Set offers a bearing or pulley tool solution featuring a classic 'H inch Bar style puller block accomillimeterodating 7 inch to 11 inch application spread. It comes with 2 sets of forged jaws for a pulling reach range of 5 inch to 9 inch and is tempered for heavy-duty applications and two forcing screws are included for short and long pulls. Where a push puller is the best pulling choice when threaded holes are not available, the 4532 provides technicians and shops with a solution for many applications like heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers. Deep set transmission gears and A/C clutches. Roller gears on tracked vehicles, locking collars on pivot shafts.7. Adjustable Two Jaw Pilot Bearing Puller Tool Carbon Steel Pump Pulley Remover Straight Type (Size : 6" 5590mm/2.2"3.5")
Feature
TOP QUALITY: Made of carbon steel material, it is durable.CONVENIENT: Adjust screw design, flexible and convenient to repaired different size gears and bearing.
PROFESSIONAL: Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
WIDELY USEFit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on
GUARANTEE : If you are not satisfied with our product received, you can apply for unconditional return and refund in the valid period(12 months). In terms of any problem of this product, you can send emails to us at any time. We will be the first time to reply you.
Description
This 2-jaw bearing puller design and built to give you positive pulling power,to remove bearing groove pulleys on alternator and power steering pumps, adjust screw design, flexible and convenient to repaireddifferent size gears and bearing. Fit for automotive flywheel, motorcycle wheel, car wheel and so on.
Features:
1.Made of carbon steel material, it is durable
2.Adjust screw design, flexible and convenient to repaired different size gears and bearing
3.Designed and built to give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps
4.Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on
5.Different size offers you choose
Specifications:
Material: Carbon steel
Color: Black
Size:
2.5" 35 * 45mm / 1.4" * 1.8"
3" 38 * 65mm / 1.5" * 2.6"
4" 40 * 80mm / 1.6" * 3.1"
6" 55 * 90mm / 2.2" * 3.5"
8" 70 * 120mm / 2.8" * 4.7"
Package Included:
1 x Two Jaw Gear Pullers
Note: Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
8. OTC (1040 Mechanical Grip-O-Matic Puller - 13 Ton, Long 2 Jaw
Feature
13 ton capacity, long 2 jawMaximum reach of 15-1/4 inches
Maximum spread of 15-1/2 inches
Jaw thickness is 9/16 inch
Jaw width is 1 inch
Description
The OTC 1040 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.9. OTC (1036 Mechanical Grip-O-Matic Puller - 7 Ton, Long 2 Jaw
Feature
7 ton capacity, long 2 jawMaximum reach of 8-3/4 inches
Maximum spread of 9-1/2 inches
Jaw thickness is 11/32 inch
Jaw width is 1 inch
Description
The OTC 1036 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.10. Performance Tool W140 2-Jaw Gear Puller, 3-1/2"
Feature
Heat treated alloy steelDrop forged for strength
Chrome plated finish
Recent Comments