Top 10 receptacle tester kit
If you looking for receptacle tester kit then you are right place. We are searching for the best receptacle tester kit on the market and analyze these products to provide you the best choice.
Best receptacle tester kit
1. IDEAL 61-534 Digital Circuit Breaker Finder with Digital Receiver and GFCI Circuit Tester
Feature
Circuit Breaker Finder With Digital Receiver & Gfci Circuit TesterFully Automatic Operation
Positively Identifies Circuit Breakers & Fuses Without Service Interruption
Automatically indicates the right breaker for quick & easy breaker identification
Works on 120/220-Volt circuits
Verifies presence of power
Includes GFCI receptacle tester
Non-contact voltage sensor included
Description
This Automatic Circuit Identifier comes with a digital receiver and a 120-volt-240-volt GFCI receptacle tester. Now you have a unit that automatically indicates the right breaker for quick and easy breaker identification and plus verifies the presence of power. It works on 120-volt-240-volt circuits. A noncontact voltage sensor is included. The GFCI receptacle tester is a part of this kit as well and verifies proper wiring. The Identifier is UL and CE approved and has a two-year warranty.2. Klein Tools 69149 Electrical Test Kit with Multimeter, Non-Contact Voltage Tester and Receptacle Outlet Tester
Feature
The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulationThe NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
Description
Klein Tools updated Electrical Test Kit contains MM300 (Manual-Ranging digital Multimeter), NCVT-1 (Non-Contact Voltage Tester) and the RT105 (Receptacle Tester). The NCVT-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles. MM300 tests continuity with visual and audible continuity indicators. Test leads included for MM300; batteries included for NCVT-1 and MM300. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.3. Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter, Continuity Tester, GFCI Tester, Line Splitter, Case, Leads, 3 x AAA
Feature
Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leadsDetects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
Backlit display for clear readings
Includes a case, test leads and batteries
Description
Klein Tools Clamp Meter Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of voltage. The kit includes a carrying pouch, test leads and batteries. Includes a case, test leads and batteries. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.4. Sperry Instruments STK001 Non-Contact Voltage Tester (VD6504) & GFCI Outlet / Receptacle Tester (GFI6302) Kit, Electrical AC Voltage Detector, Yellow & Black
Feature
VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
AUDIBLE AND VISIBLE INDICATOR: 360 visual and beeping audio Non-Contact Voltage Detection (VD6504)
RATED: CAT Rating III 300V, C-UL US (GFI6302), CAT Rating III 1000V, IV 600V, (VD6504) 10 ft Drop and 250 lb Crush (GFI6302 and VD6504)
Description
Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The electrical testers below accurately identify and capture circuit continuity and voltage measurements. These testers are ideal for any electrical professional or to have at home.5. Klein Tools NCVT2KIT Voltage Test Kit, Basic pack
Feature
Accurately detect Voltage in cables, cords, etcLightweight yet durable design
Pocket clip for convenient storage and quick access
Description
The basic voltage test with dual range is specially designed to accurately detect voltage in cables, cords, circuit breakers, lighting fixtures, switches, and outlets. Featuring a cat IV 1000V rating, it provides expanded operation and protection. Designed with performance in mind, it features a lightweight yet durable polycarbonate plastic-resin construction and pocket clip, allowing for convenient storage and quick access.6. Klein Tools RT210 Outlet Tester, Receptacle Tester for GFCI / Standard North American AC Electrical Outlets, Detects Common Wiring Problems
Feature
Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips neededRound jaw holds 0.30 to 0.80-Inch (7.62 to 20.30 mm) diameter cable range
Large eyelet opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
Hot latch closes automatically to guard wire
Max Safe Load of 10,000-Pound (4536 kg)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
Description
Visual LED bar graph indicates the presence of voltage. The higher the voltage sensed, or the closer to the voltage source, the more LEDs light up. Bright flashlight illuminates work area and may be used independent of voltage detection function.7. Neoteck Electrical Test Kit Includes Mini 1999 Count Digital Multimeter Non-Contact 12-1000V AC Voltage Detector Pen and Receptacle Tester for Laboratory Industry Education Factory Workshop
Feature
Neoteck Electrical Test KitComes with a Mini 1999 Count Digital Multimeter, Non-Contact 12-1000V AC Voltage Detector, and a Receptacle Tester to Meet Most Electronic Testing Needs, Ideal for Laboratory, Education, Factory, Workshop, Household UseMini MultimeterMulti-functional Tester with Backlit LCD Display, Also Comes with with Pair Test Lead, Accurately Measures AC/DC Voltage, DC Current, Resistance, and More, Recommended by Many Professionals Engineers, CE Rated for Over Load Protection, Includes 9V Batteries Under Load
Non-Contact Voltage Detector This Non-Contact Voltage Detects AC Voltage within 12-1000V AC, Indicating Voltage by Flashing Red LEDs, All Electric Appliances in Your Family can be Tested by it with CE CAT III600V RoHS Certificate, It Also Has a Pocket Clip and a Tip that Fits into Outlets or Against Wire Insulation
Standard US Receptacle TesterFeaturing Lights that Indicate Circuit Condition, Tests Standard & GFCI Sockets/ Outlets/ Receptacles for Proper Wiring (110-125V AC), Detect Five Different Wiring Faults: Open Ground, Open Neutral, Open Hot, Hot/ Ground Reverse, and Hot/ Neutral Reverse
Wide ApplicationA Set of Quick Fix Tool, Perfect for Weekend Warriors, DIY Homeowner and Anyone just Learning How to Do This Type of Work, Helping You Evaluate the Outlets and Identify the Hot Wires in the Basement Testing, Durable Quality for a Long Time Use with 18 Months US Base Warranty Back up
Description
All Neoteck Products have 18 Months US Base WarrantyThis Electrical Test Kit which provides you with basic troubleshooting tools for common electrical problems. It comes with three powerful tools, the 1999 Count Manual Ranging MultiMeter, the Non-Contact Voltage Detector and Receptacle Tester.
The Mini Multimeter that Measures AC/DC Voltage, DC Current, Resistance, and More with LCD display. The multimeter takes interchangeable test leads and is protected by a durable orange shell, and with the stand places the device at a 45 degree angle and makes the screen easy to see.
Non-Contact Voltage Detector
This detector is a professional tester, It is perfectly for DIY'ers, Hobbyists and Home Owners, It helps you make the first and the most important safety check, It Detectes voltage in a Non-Contact way, Do Not worry about there could be any possibility of being shocked by the electricity.
The Receptacle Tester
Senses:
Outlet tester: open grounds, open neutrals, reversed hot, neutral;
Application:
Appliance repair, electrical installation, home inspection
Package Content:
1 x Pocket Digital Multimeter
1 x Non-Contact Voltage Tester Pen
1 x US Receptacle Tester
1 x Test Lead Probe(Pair)
8. Greenlee TK-30AGFI GFCI Electrical Kit, 1-Pack
Feature
Kit includes multimeter DM-25, non contact voltage detector, receptacle tester GT-10GFI and carrying caseMultimeter measures AC/DC voltage up to 600V
Non contact voltage detector safely detects AC voltage
Receptacle tester ensures sockets are wired correctly with additional ground fault circuit Interrupter (GFCI) testing capability
Lifetime warranty
Description
The new TK-30AGFI Ground Fault Circuit Interrupter (GFCI) Electrical Kit features three essential tools for electrical work, a multimeter, a non-contact voltage detector and an outlet circuit tester.9. Signstek Maintenance and Test Electrical Test Kit, Including Palm Size Multimeter, Receptacle Tester and AC Voltage Detector
Feature
Palm Size Multimeter: The multi meter can measure DC/AC Voltage, DC current and resistance, ETL certificated ensures that users can work safely in CAT II 250V environment.Receptacle Tester: Checks for correct wiring in 3-wire electrical receptacles on AC circuits. Built-in LED indicators, support voltages for 110V to 125V, also has GFCI feature.
AC Voltage Detector: Upgraded non-contact AC voltage detector can indicate by hearing, vision and touch. AC voltage range is 90V ~ 1000V, UL certificated, CAT IV 1000V can be applied to house, industry.
High Quality: The Multimeter has a red rubber shell which can withstand 2 meters drop. The Receptacle Tester and AC Voltage Detector are able to be used for longtime.
Application: The combinations can be used for electricians for their electric work, can be used at home to maintenance circuits, sockets of your house.
Description
The package including with UT131B,UT08B and UT12BUT131B: Equipped with comfortable protective cover, test probe holder
UT08 series checks for correct wiring in 3-wire electrical receptacles on AC circuits. It provides fast and easy wiring verification for voltages of 110V to 125V
UT12 series is a non-contact AC voltage detector. It is lightweight and convenient to carry due to its pocket size.
10. Gardner Bender GTK-2 Safety Kit, GVD-3504 Non-Contact Voltage Tester and GFI-3501 GFI Tester, 2-Piece
Feature
Non-Contact Voltage Tester senses AC voltage from 50-600VNon-Contact Voltage Tester features visual and audible indicator, pocket clip, on-off button
GFCI Outlet Tester features indicating lamps that indicate 5 common wiring errors
GFCI Outlet Tester has comfortable contoured design
Two Piece Safety Kit
Superior quality at an affordable price
Gardner Bender branded products and professional equipment have been a mainstay with electrical contractors
Recent Comments