Top 10 pipe wedge
If you looking for pipe wedge then you are right place. We are searching for the best pipe wedge on the market and analyze these products to provide you the best choice.
Best pipe wedge
1. Williams WG-6 6-Inch Set Up Wedge
Feature
6-Inch longOverall width of 1 1/4-Inch
Thick end is 3/4-Inch
Used for setting up work on planers, shapers, milling machines and other similar applications
Heavy duty machine shop tool
Description
The Snap-On JH Williams WG-6 6-Inch set up wedge has an overall width of 1 1/4-Inches and the thick end is 3/4-Inch. This wedge is used for setting-up work on planers, shapers, milling machines and other similar applications.2. Williams WG-5 5-Inch Set Up Wedge
Feature
5-Inch longOverall width of 1-Inch
Thick end is 1/2-Inch
Used for setting up work on planers, shapers, milling machines and other similar applications
Heavy duty machine shop tool
Description
The Snap-On JH Williams WG-5 5-Inch set up wedge has an overall width of 1-Inch and the thick end is 1/2-Inch. This wedge is used for setting-up work on planers, shapers, milling machines and other similar applications.3. Williams WG-3 3-Inch Set Up Wedge
Feature
3-Inch longOverall width of 1-Inch
Thick end is 1/4-Inch
Used for setting up work on planers, shapers, milling machines and other similar applications
Heavy duty machine shop tool
Description
The Snap-On JH Williams WG-3 3-Inch set up wedge has an overall width of 1-Inch and the thick end is 1/4-Inch. This wedge is used for setting-up work on planers, shapers, milling machines and other similar applications.4. Sawyer 8.75" Spacing Wedge / Spacing Tool (Large)
Feature
Quickly obtain exact weld gapSpacing Wedge has a maximum thickness of 1/4"
Tapers to a chiseled point
Special process hardens steel; will not bend or mushroom
Hard-wearing and precision machined
Description
Sawyer's Spacing Tool options create a precise weld gap when fitting pipe, spreading the gap to the exact desired width and accommodating a range of small to large diameter pipe. The Spacing Tool and Short Spacing Tool work in conjunction with a wide range of clamps, pipe welding tools, and other Sawyer tools to optimize any pipe fit up requirement. To create a precise welding gap, mount and tighten a Sawyer clamp to the ends of aligned pipe, spread the gap using the spacing tools to the desired width. Brittle spacing tools that shatter and bend are a constant problem on the line. A traditional spacing tool is typically made of hardened spring steel, but through an optimized hardening process, Sawyer is able to produce a harder tool that is not brittle. Compared to any other version of a spacing wedges on the market, the Sawyer Spacing Tool is harder and will not bend or mushroom under pressure. This Spacing Tool has a maximum thickness of " and has a longer blade space, the Short Spacing Tool has a maximum thickness of 3/16". Each wedge gradually tapers to a smooth, chiseled point, creating the ideal spacing wedge for any pipe fit up job.5. Ajax Tools 875 Flange Wedge Straight
Feature
Made Of Carbon SteelForged For Maximum Toughness
7/8" Hight and Width
11" Length
Description
Petrochemical Plants and Oil Refineries use these tools to separate pipe flanges and re-align pipe flanges in their assembly and maintenance operations. Manufacturing Plants use these tools for lifting and aligning machinery. Steel Fabricators use these tools in the alignment of steel plate prior to welding.6. B&B Pipe 2130 Stepped Pipe Wedge (Small) 3/4" Width x 4" Length for Pipe Fitting Welding
Feature
3/4 in. x 4 in. pipe wedge is ideal for small jobs.Steps: 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in.
Dual-use tool can be used as a wedge and a gauge.
Easy to handle for pull or push to make gap width adjustments.
Heavy-duty design can be used to scrape, poke, and prod weld to remove slag.
Description
B&B Pipe 2130 Stepped Pipe Wedge (Small) 3/4" Width x 4" Length for Pipe Fitting Welding
The B&B Pipe 2130 Small Stepped Pipe Wedge is used for aligning pipe for fit up and welding. This small stepped wedge also features a built-in gauge. Hole in wedge allows for fall protection and an easy grab point for extraction. Small wedge measures 3/4-inches wide by 4-inches in length.
- Dimensions: 3/4 in. x 4 in.
- Steps: 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in.
- Dual use as wedge and gauge.
- Pull or push for gap width adjustments.
- The stepped wedge allows for a full line of sight during pipe fit-up.
- Unique hole allows fall protection and wedge extraction.
- Wedge can be used to measure landings quickly and accurately.
- Durable construction allows wedge to be used to scrape, poke, and prod weld to remove slag, porosity, and identify defects.
- Can be used with a standard wedge or alone.
7. B&B Pipe 2132 Stepped Pipe Wedge (Large) 1-3/4" Width x 8" Length for Pipe Fitting Welding
Feature
B&B Pipe 2132 Large Stepped 1-3/4 in. x 8 in. pipe wedge is ideal for large jobs.Steps: 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in.
Dual-use tool can be used as a wedge and a gauge.
Easy to handle for pull or push to make gap width adjustments.
Heavy-duty design can be used to scrape, poke, and prod weld to remove slag.
Description
B&B Pipe 2132 Stepped Pipe Wedge (Large) 1-3/4" Width x 8" Length for Pipe Fitting Welding
The B&B Pipe 2132 Large Stepped Pipe Wedge is used for aligning pipe for fit up and welding. This large stepped wedge also features a built-in gauge. Hole in wedge allows for fall protection and an easy grab point for extraction. Large wedge measures 1-3/4-inches wide by 8-inches in length.
- Dimensions: 1-3/4 in. x 8 in.
- Steps: 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in.
- Dual use as wedge and gauge.
- Pull or push for gap width adjustments.
- The stepped wedge allows for a full line of sight during pipe fit-up.
- Unique hole allows fall protection and wedge extraction.
- Wedge can be used to measure landings quickly and accurately.
- Durable construction allows wedge to be used to scrape, poke, and prod weld to remove slag, porosity, and identify defects.
- Can be used with a standard wedge or alone.
8. Sawyer 4" Spacing Wedge/Spacing Tool (Small)
Feature
Quickly obtain exact weld gapShort Spacing Wedge has a maximum thickness of 3/16"
Tapers to a chiseled point
Special process hardens steel; will not bend or mushroom
Hard-wearing and precision machined
Description
Sawyer's Spacing Tool options create a precise weld gap when fitting pipe, spreading the gap to the exact desired width and accommodating a range of small to large diameter pipe. The Spacing Tool and Short Spacing Tool work in conjunction with a wide range of clamps, pipe welding tools, and other Sawyer tools to optimize any pipe fit up requirement. To create a precise welding gap, mount and tighten a Sawyer clamp to the ends of aligned pipe, spread the gap using the spacing tools to the desired width. Brittle spacing tools that shatter and bend are a constant problem on the line. A traditional spacing tool is typically made of hardened spring steel, but through an optimized hardening process, Sawyer is able to produce a harder tool that is not brittle. Compared to any other version of a spacing wedges on the market, the Sawyer Spacing Tool is harder and will not bend or mushroom under pressure. This Spacing Tool has a maximum thickness of " and has a longer blade space, the Short Spacing Tool has a maximum thickness of 3/16". Each wedge gradually tapers to a smooth, chiseled point, creating the ideal spacing wedge for any pipe fit up job.9. Calculated Industries #1190 Air Shim Inflatable Pry Bar and Leveling Tool; 300 LB Rating; Contractor-Grade Alignment Pump Wedge
Feature
CONTRACTOR-GRADE inflatable air wedge for window, door and cabinet installations; replaces damaging pry bars and wooden shims300 LB LOAD RATING safely handles full size installations with just a single installer; saving time and labor costs
ROUNDED CORNER AND INTERNAL STIFFENER gets into tight 3/32" gaps and won't fold under pressure; durable, no-scuff cover leaves no marks
WIDE 2-1/2" GAP SPANNING CAPACITY means greater lifting or pushing range and more versatility on the job or around the house
EASY ONE-HANDED OPERATION using simple squeeze pump and precise bleeder valve lets you raise and lower to perfect alignments
Description
"The New AirShim inflatable pry bar and leveling tool is designed for professional users. The AirShim allows a single installer to position and hold items in place, saving jobsite time and reducing labor costs by providing a much-needed extra hand in installations. Its perfect for window and door installers, interior construction professionals, installers of appliances and small equipment, other skilled craftsmen and serious DIYs.CONTRACTOR GRADE FEATURES -- Professional level 300 pound load capacity certified by SGS. Fully inflated 2.5 gap-spanning capability means greater lifting range and the ability to handle more jobs. Rounded corner and internal stiffener allows the AirShim to be inserted (crammed) into tighter spaces without bending. Wont fold under pressure. Backed with a 1-Year Warranty.
LIFT, SHIFT, ALIGN, LEVEL and PLUMB -- by utilizing multiple AirShims below, above, left and right of heavy objects you can fine-tune their positioning with easy adjustments from all 4 sides resulting in faster, more secure placements.
SIMPLE ONE-HAND OPERATION -- AirShims powerful hand pump inflates to lift or move loads, while the precision bleed valve button allows for simple one-handed adjustments and deflation.
REDUCES SURFACE DAMAGE -- Unlike wooden shims, wedges and metal pry bars, the AirShim poses no risk of damage to surrounding surfaces.
SO MANY USES, YOULL WANT SEVERAL -- the more you use AirShim the more uses you will find! Appliances, Beams, Cabinets, Doors, Equipment, Furniture, HVAC, Plumbing, Joists, Countertops, Mantels, Bathroom Fixtures, Curtain Walls, Flanges, Windows, and more!
Soon you will wonder how you ever did without them!
Click Add to Cart to get yourself 1 or more AirShims today!
Copyright 2017 Calculated Industries. All rights reserved. "10. Ajax Tools 882 Wedge 1/2 x 1 x 6
Feature
Made in USA1/2"H x 1"W x 6"L
Recent Comments