Top 10 lipo jst-ph for 2019

If you looking for lipo jst-ph then you are right place. We are searching for the best lipo jst-ph on the market and analyze these products to provide you the best choice.

Best lipo jst-ph

Product	Features	Editor's score	Go to site
	4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone etc.		Go to amazon.com
	6pcs 260mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop FPV Racing Drone		Go to amazon.com
	TATTU 6pcs 3.7V 600mAh LiPo Battery Pack 25C 1S with Molex Plug Compatible with Syma X5 X5C X5SW X5SC-1 CX-3W CX-31 M68 M68R UDI U45 Beginners X708W Wi-Fi FPV Training RC Quadcopter		Go to amazon.com
	HATCHMATIC 4pcs 260mAh 4.35V 30C HV Lipo Battery JST- PH2.0 for Multicopter Drones		Go to amazon.com
	4pcs 550mAh HV 3.8V 1S LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny 7 Tiny Whoop FPV Racing Drones		Go to amazon.com
	uxcell Power Supply DC 3.7V 750mAh 752245 Li-ion Rechargeable Lithium Polymer Li-Po Battery		Go to amazon.com
	BETAFPV 1s Lipo LiHV Charger Board 1S LiPo Battery Charging Plate 4.2V/4.35V for Tiny Whoop Blade Inductrix JST-PH 2.0 Micro-JST 1.25 HV Lipo Battery		Go to amazon.com
	BETAFPV 8pcs 300mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix		Go to amazon.com
	FidgetFidget Polymer Li Battery Li-po JST-PH 1.25 Plug 3.7V 400 mAh 582535 for Tablet PC GPS		Go to amazon.com
	EUDAX 20 Sets Mini Micro Jst 2.0 Ph 2-Pin Connector Plug Male With 150mm Cable Female Connector Heat shrink tube for Li-Po Batteries		Go to amazon.com

Related posts:

1. 4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone etc.

Feature

Capacity: 600mAh 50C 3.7V,the 600mAh large capacity offers you a long flying time.
Light weight reliable,50C Discharge Rate,High-grade Lipo cell is highly reliable and durable for long-lasting use.
To fit for Inductrix FPV Plus FPV Racing Drones.
The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX.
Newly developed chemistry 1S Battery, Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience.

Description

4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone etc.


Item:600mAh 1S Lipo Battery
Continuous Discharge Rate: 50C
Dimension:
Weight:
Capacity: 600mAh
The connector plug: JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
Suitable for: Inductrix FPV Plus .

Attention:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.


Note:

NOT for blade inductrix and blade inductrix fpv

Package Including
4 * 600mAh 1S Lipo Battery 50C 3.7V JST-PH 2.0

2. 6pcs 260mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop FPV Racing Drone

Feature

Capacity: 260mAh 30C 3.8V.
Weight: 7g/per unit,Light weight reliable size:66x11.5x5.9mm.
To fit for Tiny Whoop FPV Racing Drone.
The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX.
Newly developed chemistry HV 1S Battery,Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience.

Description

6pcs 260mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop FPV Racing Drone

Item: 260mAh HV 1S Lipo Battery
Rate: 30C
Dimension: 66x11.5x5.9mm
Weight: 7g/per unit
Capacity: 260mAh
The connector plug: JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
Compatible: To fit for Tiny Whoop FPV Racing Drone.

Attention:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.


Package Including
6 * 260mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0

3. TATTU 6pcs 3.7V 600mAh LiPo Battery Pack 25C 1S with Molex Plug Compatible with Syma X5 X5C X5SW X5SC-1 CX-3W CX-31 M68 M68R UDI U45 Beginners X708W Wi-Fi FPV Training RC Quadcopter

Feature

Tattu Professional LiPo Battery; Superior Japan and Korea Lithium Polymer raw materials
Quickly Recharged, Long Cycle Life (150 times minimum), up to 200Wh/kg energy density
Parameter: Weight: 0.03lb; Dimension(LxWxH): 1.61x0.98x0.35in; Connector, Molex Plug
Applications: replacement for Syma X5, X5C, X5SC, X5C-1,X5SW and Cheerson CX-30W RC Quadcopter Drone,no modification necessary.
What you get: Tattu LiPo Battery Pack with Molex Plug

Description

Details:
Brand: Tattu
Capacity(mAh): 600mAh
Voltage(V): 3.7V
Discharge Rate (C): 25C
Max Burst discharge Rate (C): 50C
Configuration: 1S1P
Net Weight(dev.20g): 15g
Length(dev.5mm): 41mm
Width(dev.2mm): 25mm
Height(dev.2mm): 9mm
Connector Type: Molex Plug

Overview
Tattu is one of the top rank RC battery brand in the market. With the effort of 200 professional engineers and technicians, Tattu always provides batteries with exquisite technology for various RC Models such as RC cars, RC planes, RC helis, RC boats, etc.

Features:
1.Superior Japan and Korea Lithium Polymer raw materials.
2.Automatic stacking technology, better performance
3.Strict matching progress, excellent consistency
4.Up to 200Wh/kg energy density
5.Long cycle life (150 times minimum)
6.Local after-sales service(located in Dublin, CA)

Notes:
1.Shipments fulfilled by Seller are shipped from Dublin, CA(Can only shipped within USA and Canada).
2.For any questions, pls feel free to contact us through "Your Orders" tab of your Amazon account, we will respond within one business day.
3.All Rights Reserved by Gensace&Tattu.

4. HATCHMATIC 4pcs 260mAh 4.35V 30C HV Lipo Battery JST- PH2.0 for Multicopter Drones

Feature

Item type: parts & accessories
4pcs 260mah 4.35v 30c hv lipo battery jst- ph2.0 for multicopter drones
Product has a quantity of 1 unit
We ship internationally

Description

Use: vehicles & remote control toys, for vehicle type: helicopters, plastic type: abs, tool supplies: battery, remote control peripherals/devices: battery, material: plastic, rc parts & accs: batteries - lipo, four-wheel drive attributes: battery, upgrade parts/accessories: frame, technical parameters: value 2, unit type: lot (4 pieces/lot),package weight: ,package size:

5. 4pcs 550mAh HV 3.8V 1S LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny 7 Tiny Whoop FPV Racing Drones

Feature

Capacity: 550mAh 50C 3.8V,the 550mAh large capacity offers you a long flying time.
Light weight reliable,50C Discharge Rate,High-grade Lipo cell is highly reliable and durable for long-lasting use.
To fit for Inductrix FPV Plus ,Tiny 7, Tiny Whoop FPV Racing Drones. NOT for Inductrix FPV
The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX.
Newly developed chemistry HV 1S Battery, Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience.

Description

4pcs 550mAh 1S HV 3.8V LiPo Battery Rechargeable 50C JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus Tiny 7 Tiny Whoop FPV Racing Drone,etc

Item:550mAh HV 1S Lipo Battery
Continuous Discharge Rate: 50C
Dimension:
Weight:
Capacity: 550mAh
The connector plug: JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
Suitable for: Inductrix FPV , Inductrix FPV Plus ,Tiny 7, Tiny Whoop,etc.

Attention:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.


Package Including
4 * 550mAh HV 1S Lipo Battery 50C 3.8V JST-PH 2.0

6. uxcell Power Supply DC 3.7V 750mAh 752245 Li-ion Rechargeable Lithium Polymer Li-Po Battery

Feature

Voltage: DC 3.7V; Capacity: 750mAh
Package Content: 1 x Lithium Polymer Battery
Material: Lithium Polymer; Net Weight: 14g
Connector Type: 2P PH2.0mm Pitch; Cable Length: 5cm / 2"
Size: 46 x 23 x 7.8mm / 1.81" x 0.91" x 0.31" (L*W*T)

Description

Description:
This battery is really the latest state of the art technology in rechargeable. It is extremely thin, light weight and super thin compared to any rechargeable chemistry.Low weight, small size but huge capacity.The other advantage of the Lithium Polymer technology is the very low self discharge .

Features:
* Excellent safety performance
* Lightweight
* High capability
* Low internal resistance
* Excellent discharge performance
* Long cycle time

Applications:
Electrical Teethbrush, MP4, Mobile Phone, MID,baby monitor, small flying helicopters, backup power, Portable DVD, POS machine, Desk vidio, E-BIKE, motor, drill and Digital camera .

Note : Red connect "+" ,Black connect "-" ; the battery size has -3mm-1mm tolerance, In order not to damage the battery or shorten battery life, high voltage charging and incorrect connecting of the positive and negative pole is prohibited.
Please make sure there are no wrong positive and negative connection between your charging device and the JST Head

7. BETAFPV 1s Lipo LiHV Charger Board 1S LiPo Battery Charging Plate 4.2V/4.35V for Tiny Whoop Blade Inductrix JST-PH 2.0 Micro-JST 1.25 HV Lipo Battery

Feature

Charge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) at once in the same board by a selectable switch.
XT60 Input (3s or 4s) for field charging. Could charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once. Individual charging per ports, not parallel
Turns itself off when supply battery reaches safe low-voltage
2 channels BEC for supply current. 400mAh current per charge port
LED lights indicate when each battery is done charging

Description

BETAFPV 1s Lipo LiHV Charger Board - Charge up to 6 Lipo or HV Lipo batteries at once! Designed for Inductrix, Tiny whoop, Blade Nano QX FPV etc

This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!

Specification:
Weight: 36g
Dimensions: 75x42x17mm
Input: 3s - 4s Selectable
Cutoff Voltage: 10.8v (3s), 14.4v (4s)
Output: Fixed at approx 400 milliamps
4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter

Note: Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.

Package:
1 * BetaPower 1s Lipo LiHV Charger Board by BETAFPV

8. BETAFPV 8pcs 300mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix

Feature

The upgrade version 1S HV 300mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.
Compared with 260mAh HV battery, you can get a longer flight time of 5'10'' and more power if you use it on Beta65s BNF.
This BETAFPV 1S 300mAh battery's weight is 7.7g with the larger capacity of 30C.
As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
Newly developed chemistry HV 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you higher speed flying experience.

Description

BETAFPV 8pcs 300mAh HV 1S Lipo Battery 30C 3.8V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix Micro Mini Drone

Specification:
Item: 300 mAh HV 1S Lipo Battry
Capacity: 300mAh
Size: 58mm*11mm*6mm
Continuous Discharge Rate: 30C
Weight: 7.7g/pc
Flight time: 5'10'' on Beta65s
(If we use 260mah battery, we can get 4'10'' only on Beta65s.)

Caution:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Package Including
8 * 300mAh 1S Lipo Battery 30C 3.8V with JST-PH 2.0 Powerwhoop Connector

9. FidgetFidget Polymer Li Battery Li-po JST-PH 1.25 Plug 3.7V 400 mAh 582535 for Tablet PC GPS

Description

Description:

1. Model code : 5076100

2. Each Cell Weight Approx100 g

3. Cell Size 5 mm (thick ) 76 mm (width ) 100 mm ( lenght)

0.196 inch 2.99 inch 3.94 inch

4. Nominal Capacity : 4200mAh

5. Built-in protection circuit PCM for prevent over charging or over discharging.

6. Fit for Remote controller,IPTV Set top box remote controller,LED lighting,Underwater lighting system,Bluetooth device,MP3/MP4 player,safety lamp,GPS,Mobile phone,E-book,Power bank,Portable DVD, Walkie talkie,Notebook,Tablet PC,PDA,Game player,Pos machine, Consumer electronics device, Medical Devices ,Flash lighting garden lighting, Toys ,Project Design etc

7. Initial impedance Approx 33 m

10. EUDAX 20 Sets Mini Micro Jst 2.0 Ph 2-Pin Connector Plug Male With 150mm Cable Female Connector Heat shrink tube for Li-Po Batteries

Feature

JST connector cable wire size: each cable wire length is approx. 15 cm/ 5.9 inches, the cable wire type is 26 AWG, micro size can meet your needs
PH 2.0 2-pin connectors: the distance between connector's port is 2 mm, larger than 1.25 mm 2-pin connectors; Note: please check the port size before purchase
Cable wire material: the cable wire is electron wire, red cable connects positive pole, black cable connects negative pole
Wide applications: this micro JST PH 2.0 2-pin connectors set fits for Li-Po battery balance charger plug, good for helicopter, quadcopter, air plane, boat and car controller
Quantity: total 20 sets, including 20 x 2-pin PH 2.0 male connector plug with wire, 20 x 2-pin PH 2.0 female plug connectors, 40 x Electronic wires (each color for 20 pieces)40cm15.75inches1 Heat shrink tube

Description

Features:
JST connector cable wires:
PH 2.0 2-pin connector wire cable is made of electron wire and zinc copper, durable and sturdy to use. Red cable wire connects positive pole and black cable wire connects negative pole, each cable length is 15 cm/ 5.9 inches, the type is 26 AWG, can meet your needs.

Applicable to:
This micro JST PH 2.0 2-pin connectors set fits for Li-Po battery balance charger plug, good for helicopter, quadcopter, air plane, boat and car controller.

Specifications:
Cable length: 15 cm
Type: 26 AWG
Cable material:electron wire
Plug connector material: plastic and metal
Cable wire color: black, red
Plug connector color: white
Quantity: 20 sets

Package includes:
20 x 2-Pin PH 2.0 male connector plug with wire
20 x 2-Pin PH 2.0 female plug connectors
20 x 15 cm Black Electronic wires
20 x 15 cm Red Electronic wires
40cm15.75inches1 Heat shrink tube

Note:
Please check the connector port size before purchase.

Conclusion

By our suggestions above, we hope that you can found the best lipo jst-ph for you. Please don't forget to share your experience by comment in this post. Thank you!