Top 10 fuel line heat shield
If you looking for fuel line heat shield then you are right place. We are searching for the best fuel line heat shield on the market and analyze these products to provide you the best choice.
Best fuel line heat shield
1. Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll
Feature
Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittentCapable of reducing up to 60 percent of radiant heat
Special weave that allows it to expand and contract over fittings, terminals and more
Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
Description
Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and Heatshield Products know custom builds have lots of tight places. Available in 10 feet and 100 feet rolls.2. 1/2" Thermo Armor Silicone Coated Fiberglass Fire Sleeve - Length: 5FT - Color: Red
Feature
Size: 1/2" | Quantity: 5 Feet | Color: Red | (size is ID and is approximate, can vary +/- 3mm)Inner Sleeve: Fiberglass | Coating Material: Silicone | Operating Temp: -50C - 260C | Flammability: VW-1
Used to protect fuel lines, hydraulic and oil lines from heat and to prolong the life of wiring and hoses in case of fire so that critical systems can function longer in the aviation and marine fields
Voltage: 7.0KV | RoHS Certified
Description
Heat shielding fire sleeve is fabricated from a dense E-glass fiberglass with a thick coating of self-extinguishing high temperature silicone rubber which is engineered to protect hoses, cables and wire harness from damage due to exposure to extreme heat, open flame and molten splash. It also provides a high degree of insulation value, protecting hot, cold or cryogenic lines, pipes and tubing from heat or cold loss, providing energy savings and abrasion resistance.3. Design Engineering 010403 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 0.75" x 3'
Feature
Slide over wires, cables and hoses for extreme heat protectionWithstands 500 degrees F direct, continuous heat and 2000 degrees F radiant heat
Pliable for tight bends
Trim to desired length
Five popular diameters to choose from: 1/2", 3/4", 1", 1-1/4", and 1-1/2"
Description
DEI Heat Sheath is an aluminized sleeving sesigned to slide over wires, cables and hoses. Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500 degrees Fahrenheit.4. Heatshield Products 204002 Black 1/2" ID x 2' Fuel Line Heat Shield Sleeve
Feature
Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittentCapable of reducing up to 60 percentage of radiant heat
Special weave that allows it to expand and contract over fittings
Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
Description
HP Builder's Kits feature a heat protective thermal sleeving capable of withstanding 1200F continuous. This non flammable sleeve has a special weave that allows it to expand and contract over fittings. These sleeves can protect fuel lines, preventing vapor lock. They can also be used to protect wires from heat damage and allow you to hide your wiring. The 1/2 Inch sleeve is ideal for shielding most fuel lines, helping to stop vapor lock and improve performance. The smaller 7/16 Inch sleeve is great for small wire looms and brake lines. The 5/8 Inch id sleeves are ideal for protecting your oil lines from heat damage caused by being too close to the motor or exhaust. So add some heat protection and make your ride a cooler one.5. Hiwow 5FT Heat Sleeve Fiberglass Adjustable Heat Shield Sleeve Black Color (5FT X 13MM(1/2''))
Feature
Mainly made of high quality fiber glass.Withstands 1100continuous and 2000intermittent
Capable of reducing up to 60 percentage of radiant heat
Helps to prevent vapor lock, protects wires from melting
Size 1/2''ID 1/4''ID 3/4''ID 3/8''ID 1''ID and so on
Description
Black heat sleeveMainly made of high quality fiber glass.
Withstands 1100continuous and 2000intermittent
Capable of reducing up to 60 percentage of radiant heat
Helps to prevent vapor lock, protects wires from melting
Size 1/2''ID 1/4''ID 3/4''ID 3/8''ID 1''ID and so on
Uses:
This is a perfect way to protect wires, fuel lines, brake lines and clutch lines for your custom build. It is ideal for shieding fuel lines, helping to prevent vapor lock, protecting sensitive wire looms form close proximity heat, shielding brake lines and hose and stopping clutch cables from melting. Many length to choose.
Warning:
You'd better wear long sleeve gloves when installing.
For skin irritations wash with soapy water and rinse well.
For eye irritation, flush eyes with cold water.
6. Design Engineering 010405 Heat Shroud - Aluminized Sleeving for Ultimate Heat Protection (with Hook and Loop Closure), 0.5" - 1.25" x 3'
Feature
Wrap around wires, cables and hoses for extreme heat protectionWithstands 500 degrees F direct, continuous heat and 2000 degrees F radiant heat
Pliable for tight bends
Trim to desired length
No need to remove wires and hoses with convenient hook and loop closure design
Description
The DEI Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close the edges.7. Hiwowsport Heat Sleeve Fiberglass Adjustable Heat Shield Black Color (10FT X 20MM(3/4''))
Feature
Mainly made of high quality fiber glass.Withstands 1100continuous and 2000intermittent
Capable of reducing up to 60 percentage of radiant heat
Helps to prevent vapor lock, protects wires from melting
Size 1/2''ID 1/4''ID 3/4''ID 3/8''ID 1''ID and so on
Description
Black heat sleeveMainly made of high quality fiber glass.
Withstands 1100continuous and 2000intermittent
Capable of reducing up to 60 percentage of radiant heat
Helps to prevent vapor lock, protects wires from melting
Size 1/2''ID 1/4''ID 3/4''ID 3/8''ID 1''ID and so on
Made in China
Uses:
This is a perfect way to protect wires, fuel lines, brake lines and clutch lines for your custom build. It is ideal for shieding fuel lines, helping to prevent vapor lock, protecting sensitive wire looms form close proximity heat, shielding brake lines and hose and stopping clutch cables from melting. Many length to choose.
Warning:
You'd better wear long sleeve gloves when installing.
For skin irritations wash with soapy water and rinse well.
For eye irritation, flush eyes with cold water.
8. Design Engineering 010408 Cool-Tape Self-Adhesive Heat Reflective Tape, 1.5" x 15' Roll
Feature
Ultra-lightweight heat reflective solution for wires, cables, hoses, fuel lines, etc.Withstands direct heat up to 400 degrees F and 2000 degrees F radiant heat
Flexible and easy to apply
Strong self-adhesive backing
Use to secure panels, seal air boxes, wrap wiring & more
Description
DEI Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000 degrees Fahrenheit of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra-lightweight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.9. Wang-Data PET Black Braided Cable Sleeve 1/4 inch X 100ft (1/4" X 100')
Feature
Size: Diameter: 1/4"| Length: 100 Feet | Color: BlackOperating temp(degree F.):-103 to 257|Melt temp: 446.Our cord organizer is used for car, audio, computer, electronic applications
UL | ROHS | REACH | Halogen Free
Our PET sleeve protects cords and wires from dirt, frays & chewing pets. Prolong the life of cables
Recommended: Cut Braided Sleeving with a HOT KNIFE to prevent fraying, if a Hot Knife is not available, make sure to sear the edges with another heat source (example: use the flame from a lighter)
Description
Size: 1/4''-100ftColor:Black
Packaging: Standard Braided Cable Sleeve1/4" x 100 Ft
Our PET braided sleeving fully protects wires and cords from dirt, frays & chewing pets, and prolongs the life of cables.
This cord organizer is made from Polyethylene Terephthalate (PET) and It's flame-retardant, halogen-free, flexible and high stretch.
Our cable sleeve can be cut easily by knife and you can "Do It Yourself"
10. AutoEC Heat Shield Tape, Self-Adhesive Heat Reflective Tape Roll, Adhesive Backed Heat Barrier for Car, Truck, Motorcycle (1.5"X 15')
Feature
High Quality --- Use with fiberglass and highly conformable material that has a pressure sensitive adhesive backing, not easy to fall off.Efficient Heat Reflective --- Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent. Capable of reducing up to 90 percentage of radiant heat.
Flexible Use --- The Heat Shield tape with 1-1/2" Wide x 15'.Properly width, flexible use, to make a clean professional appearance.
Easy to Apply --- Self-Adhesive backing, easy sticks to almost any clean surface.
Wide Application --- Common uses include wrapping wire bundles, fuel lines, engine covers and more from radiant heat. Also can use for firewall, hoods, hoses, doors and anywhere you want to control radiant heat.
Description
This heat shield tape reflects up to 90 percent of radiant heat away from wires, lines, cables, hoses, and more. It is an excellent way to insulate components without disassembly, or it may be used as a means to hold other thermal insulation in place. The tape is Tape is a ultra-lightweight heat reflective solution to heat problems. The heat shield tape is a must have for your race track tool box. Durable cloth construction makes it longer lasting and more rugged than similar products.The reflective heat shield tape cuts easily and installation is simple with Their high temperature self-adhesive backing that sticks to any clean surface. Wider heat shield tape rolls available up to 15' long, minimums will apply.Description
Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms - anything or area that needs protection from heat.
Application
All Intake pipe / Suction Kit
All Intercooler Pipes / Turbo Pipes
All Heat Exchange Pipes
Other Industrial pipes / surface
Note
Please keep the surface is clean before you use the tape ,anywhere that had grease / oil etc will can't stick.
Recent Comments