Top 10 floating valve for 2019
If you looking for floating valve then you are right place. We are searching for the best floating valve on the market and analyze these products to provide you the best choice.
Best floating valve
1. TWIN PACK: Two FLOATING VALVE (or Float Vale) and Silicon Gasket Sets for Power Pressure Cooker Models Such as XL, YBD60-100, PPC780, PPC770, PPC790, PCXL-PRO6, PC-TRI6, and PC-WAL1
Feature
Two sets of Floating Vale (or Float Vale) and Silicon Gasket that fit most models of the Power Cooker including but not limiting the XL (6 & 8 &10 Quart): YBD60-100, PPC780, PPC770, PPC770-1, PPC790, PCXL-PRO6, PC-TRI6, PPC773, PC-WAL1, and WAL3.Floating Vale and Silicon Gasket are part of the lid of a Power Pressure Cooker, and are essential for the pressure cooker to work
Under normal situation, Floating Vale inserts into the lid from outside to inside. The Silicon Gasket locks the Floating Vale from inside, keeping the Floating Vale in place
Silicon Gasket is often washed off, leaving the Floating Vale loose and the pressure cooker unusable because the steam leaks
This spare part can make your disabled cooker work like new
Description
Two sets of Floating Vale (or Float Vale) and Silicon Gasket that fit most models of the Power Pressure Cooker including but not limiting the XL (6 & 8 &10 Quart): YBD60-100, PPC780, PPC770, PPC770-1, PPC790, PCXL-PRO6, PC-TRI6, PPC773, PC-WAL1, and WAL3. Please take a look at the measurements as shown in the picture. As long as the measurements are identical to those of your current cooker, the set will work with your cooker.2. Kerick Valve MA052 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/2" NPT Male
Feature
Estimated rate of flow up to 1.5 gpm at 60 psiPVC for corrosion resistance
Tank mount with extended threads on inlet side of valve for mounting through tank wall
Includes 1.5x4" float ball attached to adjustable valve shutoff arm
1/2" NPT male threaded inlet and free-flow outlet
Description
This Kerick MA052 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093" orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi. The valve inlet has 1/2" NPT male extended threads with a sealing washer and jam nut for mounting through a tank wall, and the valve outlet is free flowing. The valve is made of National Sanitation Foundation (NSF) approved PVC (polyvinyl chloride), its replaceable seals are made of TPE (thermoplastic elastomer) for durability and chemical resistance, and its hardware is made of 18-8 stainless steel for corrosion resistance. The valve has a 1.5" in diameter and 4" long polyethylene float attached to the adjustable shutoff lever arm. This float valve is suitable for use in a variety of applications, such as fountains and livestock water tanks.
Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever. When the angle of the valve lever changes sufficiently, the valve opens or closes. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, such as fountains, livestock water tanks, cooling towers, and chemical manufacturing plants.
Kerick Valve manufactures fluid level control valves for industrial applications. The company, founded in 1994, is headquartered in Jacksonville, FL.
What's in the Box?
- MA052 valve
- PF154 float ball
3. Ioffersuper 3 Pcs Stable Float Ball Valve Shut Off 1/2" Automatic Fill Feed Humidifier Tank Water
Feature
Product Name: ball valveProduct Type: WDN15
Thread Size:1/2"
Body Material: ABS plastic gaskets EPDM
Float material: PE Quantity:3 pcs
Description
Product Name: ball valve Product Type: WDN15 Thread Size:1/2" Body Material: ABS plastic gaskets EPDM Float material: PE Spool Material: NR Apply pressure: 0.02- 1.0 MPA Water temperature: -30 degrees Celsius to 70 degrees Celsius Valve total length: 15 cm, (excluding outer rib mouth 2.8CM)4. HydroLogic HLFV4 Float Valve, 1/4"
Feature
Achieve optimal water levels with the Hydro-Logic float valveAdjust as needed
Works with Active Aqua Hydrologic water filtration systems
Description
Float Valve 1/4", works to maintain proper water levels in your Active Aqua Hydro-Logic water filtration system. Can be purchased separately.5. 1/4 inch Tube Float Valve Kit for RO Water Reverse Osmosis System water filter Push in to Connect Pipe Hose Tube Fittingsball valve +L+15 feet pipe (blue)
Feature
Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc100% BPA free, 100% leak free, 100% Re-useable
1/4" Tube Float Valve Kit Connects to Faucet
Minimum Operating Pressure: 40 PSIMaximum Operating Pressure: 80 PSI
The Aquatic Life Float Valve Kit allows you to fill large tanks; containers; and aquariums automatic
Description
Where to use it ?Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine,aquaponic fish tank etc.Float valves are simple to install and can save a lot of water from ending up on the floor. They can be installed in containers as small 1 gallon pails, sumps, and 200 plus gallon commercial storage containers to shut off the flow of water. Even if you do not have a large storage container a simple 5 gallon bucket with a float valve installed in it will help save money from having water end up on the floor or best case scenario just going down the drain. Also you can convert any coffee or espresso machine to automatic refill
How to use it ?
Installation is as easy as drilling a small hole in the container, sliding the float in and attaching using the included nut. and then pop in your 1/4" tubing into 90 degree 1/4 tube fitting , pushing until it won't go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.
6. Mueller Industries 109-814 Float Valves, 3/4-Inch
Feature
Dual inlet thread for connecting pipe and locknutHigh tensile serrated arms
Machined flange for support against tank wall
Bronze finish
Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves
Carded
3/4-Inch
Description
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI.7. Malida FBA_646455 Water Filter Float Ball Valve,or Fish Aquarium Uses 1/4 Inch Supply Tube.
Feature
Suitable for Reverse Osmosis System,Fish Aquarium,etcPVC for corrosion resistanceTop mounted
Float Ball Valve Shut off Uses 1/4" Supply Tube
Tank mount with extended threads on inlet side of valve for mounting through tank wall
PVC Mini Float Valve, Tank Mount, Adjustable Arm
Description
Plastic float valve automatically start and stop water flow.The float is adjustable to allow you to control the water height.
Estimated rate of flow up to 1.5 gpm at 60 psi
PVC for corrosion resistance
Tank mount with extended threads on inlet side of valve for mounting through tank wall
Includes 1x4" float ball attached to adjustable valve shutoff arm
1/4" Tube push inlet and free-flow outlet
8. Mueller Industries 109-813 Float Valves, 1/2-Inch
Feature
Bronze finishDual inlet thread for connecting pipe and locknut, high tensile serrated arms locknut included with male inlet valves
Carded
1/2-Inch
Description
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI.9. Rojo Float Valve, 3/4", Black/Yellow
Feature
Has a lock-off switch on the arm to hold the valve in the closed position if neededMounts above or below water level (check local regulations before mounting) as well as horizontal or vertical positions
Water stops when the valve body is unscrewed for servicing
Safe for potable drinking water systems
Works great on gravity flow and pressure up to 150Psi
This is an O.E.M. part
Description
Rojo float valves are float operated valves for automated filling of water storage tanks. It can be mounted above or below water, & is a simple, mechanically operated valve. The rojo is a good choice where its low flow is sufficient, & its compact, non-corrosive construction is beneficial. The rojo has an average expected flow rate of 5 GPM, & has a pressure rating of 0-150 PSI. The rojo valve is safe for potable water applications, & ETL listed to Nsf37210. Water level,Sorliva Stainless Steel Floating Ball Valve Adjustable Water Level 90 Degree
Feature
Water level is durable and rust-proof, and the brass body is heavy and does not produce toxic substances.The rubber gasket design enhances air tightness and ensures no leakage.
As the water rises, the float will also increase, releasing water. Close the float to the low position, lower the float and close the entrance.
It is widely used in water boilers, rice cookers, aquariums, water towers, etc.
There is a thick rubber ring on the top of the connector. Anti-corrosion and anti-rust.
Description
General Purpose: Hygienic, Home, Gardening, Industrial, Marine, Outdoor, Brewing, etc.
Connector: DN15 1/2"
Ball Diameter: 98.4mm/3.87"
Pole Length: 76mm/3"
Pole Angle: 90
b Corrosion and rust prevention
Applications: Hygienic, Home, Gardening, Industrial, Marine, Outdoor, Brewing, etc.
Recent Comments