Top 10 best sander spindle 2019
Finding the best sander spindle suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best sander spindle
1. WEN 6502 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base
Feature
Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch discAdjustable belt tilts anywhere from 0 to 90 degrees
Sturdy cast iron base prevents any heavy vibrations
4.3A motor provides up to 3600 RPM
Tension release lever provides for simple changes between sandpaper grits
Description
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so youll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations.
With all of this in addition to the 6-inch side disc, youll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
2. Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange
Feature
Ideal for sanding contours, arcs, curves & other irregular shapesRotating & oscillating action for increased speed, efficiency and a precision finish
Powerful 3.5A (450W) motor No Load Speed - 2000 RPM Oscillation Speed - 58 OPM
Includes 6 sanding sleeves with matching rubber drums & table inserts
On-board storage for all accessories
Description
Delivers a professional finish to every project. Outstanding performance can be expected from the Triton TSPS450 Oscillating Spindle Sander. The oscillating action in combination with the rotating drum reduces the chance for burning and eliminates band marks on both internal and external profiles. With 6 different sleeve sizes included, the TSPS450 provides woodworkers the flexibility to select the optimum sleeve size for the precise needs of every project. Stability and enhanced material support is provided by the large 11 x 14 cast iron table. This sander is that special woodworking machine that helps every project look even better when finished.3. JET JBOS-5 Benchtop Oscillating Spindle Sander, 1/2 HP, 1PH 115V (708404)
Feature
Table that tilts to 45-degrees for sanding angled materials1/2-horsepower motor accommodate even the heaviest sanding project
1-inch spindle delivers scratch-free finish
Oscillating action prolongs the sleeve life
Non-skid rubber feet prevents the unit from slipping
Description
The JET 1/2 HP Benchtop Oscillating Spindle Sander uses oscillating action to reduce friction to protect wood and prolong sleeve life. Tilts for bevel sanding, too. Amps 3, Motor Phases Single, Bearing Type Ball bearing, OPM 30, Spindle Speeds qty. 1,725, Motor Voltage 110, Motor Induction, Speed RPM 1,725, Spindle Size in. 1/4 x6 1/2 x6 and 5/8 x6, Adjustable Yes, Table Dimensions W x L in. 14 1/2 x 14 1/2, Style Benchtop oscillating spindle, HP 1/2. 1in. oscillating action reduces friction heat to protect wood and prolong sleeve life Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance Oscillation gears run in a sealed lubricated box to prolong their life and durability Table tilts to 45 to accommodate bevel sanding projects Removable on/off safety switch prevents accidental start-up Built-in 2in. dust port keeps dust and debris out of the air Spindles have threaded ends for quick, easy changes Four table inserts are provided 3/4in. and 1in. oblong, 3/4in. and 1in. round to prevent dust and debris from falling into the motor, and help protect operator Built-in storage racks keep spindles and table inserts handy Benchtop includes four non-skid rubber feet keep machine stable during use4. WEN 6510 Oscillating Spindle Sander
Feature
Powerful 1/2 HP 3.5 Amp motor provides 58 OPM and 2000 RPMIncludes six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
Attach the dust collector of your choice to the onboard dust port to minimize clean-up
Backed by a two-year warranty
Description
Remember when you used to have to sand those rounded edges by hand? With the WEN Oscillating Spindle Sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 35 pounds does not mean that we've sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.5. Grizzly G0739 Benchtop 1/2 HP Oscillating Spindle Sander
Feature
Sold on AmazonDescription
Don't let the compact size fool you, this Oscillating Spindle Sander with cast-iron table will handle just about any job you throw at it. With six different diameters of sanding drums, sanding curves of all shapes and sizes is never a problem. Onboard storage keeps sanding spindles, sleeves, table inserts and spindle washers organized and handy. This is truly a great benchtop machine! CSA certified meeting CSA C22.2 #71.2-10 and UL 987-7 standards! Includes: 5 rubber sanding drums: 3/4", 1", 1-1/2", 2", 3" 6 sanding sleeves: 1/2", 3/4", 1", 1-1/2", 2", 3" 6 table inserts: 1/2", 3/4", 1", 1-1/2", 2", 3" 3 spindle washers: 5/8", 7/8", 1-3/4" Wrench Features: Motor: 1/2 HP, 120V, 60Hz, 3.5A 58 oscillations per minute 2000 RPM (1/2" spindle)6. Delta Woodworking 31-483 Heavy-Duty Oscillating Bench Spindle Sander, 1/2-HP, 115-volt
Feature
On board storage for all accessoriesBacked by a 5 year warranty
Description
Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations
Motor: 1/2 HP, 115V, 1 Phase
Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
Table Height: 18 in.
Opening Diameter for Inserts: 5 1/2 in.
Spindle Length: 5 1/2 in.
Dust Port: 2 1/4 in., included adaptor for up to 4 in.
Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width
7. WEN 6510SPC Assorted Grits Spindle Sanding Sleeves (18 Pack)
Feature
Includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. spindle sleeve for each grit
Perfect for material removal, resurfacing and more
Designed to fit the WEN 6510 Oscillating Spindle Sander
Description
Remember when you had to sand those rounded edges by hand? Give your surfaces the finish they deserve with the WEN Spindle Sanding Sleeves. Designed for use with the WEN 6510 Oscillating Spindle Sander, this set includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves to meet a variety of applications. Each grit includes a total of six different diameter sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, 2 inch and 3 inch.8. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
Feature
1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA CertifiedTable Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
Weighs 30-Pound
Description
1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H Sanding Drum Diameter: 1/2, 3/4, 1, 1-1/2, 2 and 3-Inch; Sanding Drum Length 4-1/2-Inch 15-9/6-Inch W x 14-1/8-Inch D x 17-Inch H Weighs 30-Pound9. POWERTEC OS1400 14" Oscillating Spindle Sander
Feature
Sand contours, arcs, curves and other irregular shapes faster and easier than traditional hand sanding30 oscillating action per minute reduce friction heat to protect wood and prolong sleeve life
14 inch diameter cast iron table
Drum length: 4-1/2"; drum diameter: 1/2", 3/4", 1", 1-1/2", 2", 3 inch
Built-in dust port
Description
The POWERTEC Oscillating spindle sander makes sanding irregular shapes and curves in wood easy and convenient. Sander features a large 14 inch cast iron table, dust port and onboard storage of drums, inserts and washers. Six sizes of drums are included.Induction motor: 2.6 amps, 1800 RPM, spindle stroke: 5/8-Inch, spindle speed: 30 spm. Cast iron table: 14-inch diameter, spindle diameter: 1/2-inch, drum length: 4-1/2-inch.10. EJWOX Portable Handheld Oscillating Spindle Sander
Feature
120V, 5A motor; Weighs: 5 lb; 1-1/2" dust port1800-3200 RPM and 50-90 SPM high speed rotating and oscillating action for burn-free sanding
Includes 1/2", 3/4", 1", 1-1/2" sanding sleeves, rubber pad, and clamps for table mounting
Keyless locking bolt allows quick changing of pre-loaded sanding drums
Adjustable edge guide for accurate stock removal
Description
Portable, hand-held oscillating spindle sander for controlled, burn-free edge sanding for cabinetry, sign making, sink openings, and woodworking. Dual-action rotating and vertical oscillation for fast sanding and improved work rate. Lightweight and powerful, with a 650W motor that operates at a variable speed 1800 - 3200rpm and oscillates at 50 - 90opm. Dust extraction port with removable adaptor for work with a dust extraction system. Adjustable edge guide for controlled material removal. Bench-mounted inversion kit with non-slip bench mat and adjustable clamps for versatile sanding. Quick-change rubber sanding drums and sanding sleeves in sizes 1/2", 3/4", 1", 1-1/2". Includes sander, 4 x sanding drums, 4 x sanding sleeves, dust port adaptor, inversion kit, and adjustable edge guide.
Multiple sanding sleeves in 1/2", 3/4", 1", 1-1/2" diameters for use in a wide range of sanding tasks.
Dual action rotating and vertical oscillation movement for fast material removal and burn-free sanding.
Variable speed adjustment for precise control of the 1800-3200rpm.
Non-slip bench mat and inversion clamps converts the sander into an effective bench-mounted spindle sander.
Ergonomic rubber over-moulded grips for low vibration and improved user comfort.
Adjustable edge guide for precise material removal.
Removable dust extraction port adaptor allows compact transport and effective dust extraction.
Product Details and Features
Brand Name: EJWOX
Style No.: 2003
Colors: Orange & black
Set/packed size: 12.8x11.4x4.5 inches
weight:5 lbs
material: plastic
Recent Comments