Top 10 air extractor fan system
If you looking for air extractor fan system then you are right place. We are searching for the best air extractor fan system on the market and analyze these products to provide you the best choice.
Best air extractor fan system
1. MaxxAir BF24TFYELUPS 24-Inch High Velocity Air Movement Two Speed Portable Air Circulator, Yellow
Feature
TILT DRUM FAN: This 24 in. roll-around tilt fan from MaxxAir is ideal for garages, basements, covered patios, workshops or even warehouse and factory stations and it tilts a full 180m degrees.AIR CIRCULATOR FAN: It is ideal for use in workshop, patio or basement. It has OSHA compliant rust resistant grille, 8-feet power cord, 2-speed heavy duty thermally protected 120-Volt, 60 Hz, PSC motor.
MULTI PURPOSE FAN: Multipurpose fan offers a diversely economical solution for all of your small to medium-sized ventilation requirements.
VERSATILE FAN: Use this versatile fan in the workshop, the patio or the basement to provide 2800 or 4000 CFM of circulation with a heavy-duty 2-speed 1/4 HP thermally protected PSC motor.
DIRECT DRIVE FAN DIMENSION: High Velocity Two Speed Portable Fan is of opening size 30 x 16 x 32 inches. It is convenient handle for portability, nonskid positioning legs and pre-positioned hanging hardware receivers to install optional hanging kits.
CFM-High 4000-Low 2800
Ideal for use in workshop, patio or basement
Tilts airflow a full 180-Degree
OSHA compliant, rust resistant grille
8-Foot power cord
Description
Use this versatile fan in the workshop, the patio or the basement to provide 2800 or 4000 CFM of circulation with a heavy-duty 2-speed 1/4 HP thermally protected PSC motor. Not to be used with an extension cord or any speed control device, in an unprotected, outdoor, or wet area, or to exhaust hazardous fumes or chemicals. Fan Diameter (Inch): 24, Air Delivery (CFM): 2,800 / 4,000, HP: 1/4, Speeds (qty.): 2, Drive System: Direct, Power Cord (Feet): 8 22-gauge powder-coated steel housing tilts 180-Degree to direct circulation wherever needed Frame includes nonskid positioning legs Comes with snap-on wheel assembly.2. Hon&Guan 4 Inch Extractor Fan High Efficiency Mixed Flow Ventilation System Exhaust Air for Bathroom Kitchen Inline Duct Fan (S Series)
Feature
Moves air at a rate of 100 CFM, perfect for your bathroom and utility rooms. Notes: no plug, you can wire on a standard house plug.Lightweight and durable. Long life ball bearing motor (up to 50,000 hours).
Sound at high speed operation is quiet.
2 connections ways for low speed or high speed.
Easy to install, disassemble and clean when needed.
Description
HS-100S Parameters- Double Speed: Low/High
- Voltage: 110-120 V
- Frequency: 60 Hz
- Power: 30/38 W
- Speed: 2100/2600 (RPM)
- Air Volume: 128-170 m/h
- Air Pressure: 106/132 Pa
- Noise: 26/31 dB
- Life: Over 50000 Hours
- Weight: 1.3 KG
- Current (Amps): 0.45/0.55
- Electric Current Type: AC
- Blade Material: ABS Plastic
- Item Dimensions: 9.7*5.5*6.5 Inch - Diameter: 4 Inch
Application
HF Mixed Flow Fan can be used for exhaust and supply ventilation systems that require high pressure, hige efficiency airflow and low noise levels. With a range Applications of sizes that include 75mm, 100mm, 125mm HS fan can be used with rigid and flexible ducting. The HS Mixed Flow Fan are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc.
Design
The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct. All models have an option of standard which has a two speed motor or overrun timer option variable range of 1 to 30 minutes.
Motor
The single phase ball bearing motor has two speeds and is equipped with standard thermal overload protection (STOP) with automatic restart. Motor protection rating IP44 and are fully speed controllable.
Mounting
The fan can be mounted in line or at either and of the duct run and at any angle. Horizontally or vertically. All fans can be mounted in parallel to increase the volume of air or in series to increase the pressure. The casing is fitted with a mounting plate. The mounting box can be rotated to be installed in any position for easy installation and connection.
3. Flexzion Inline Duct Fan Booster - (4 Inch, 65 CFM) Exhaust Blower Vent Air Extractor Ventilation System HVAC Low Noise Quiet Operation with Aluminum Blade & Grounded Power Cord
Feature
Upgraded Advantages - The well-constructed balanced blades designed for long service life & quiet operation; Portable and lightweight and equipped with 5.9' grounded power cordVentilation Spec - Airflow 65 CFM, Power 12W, Voltage 120V/110V, Speed 2900 RPM; Overall Dimensions: 4" (Diameter) X 7" (Length)
Household Applications - This versatile Inline Duct Fan is designed to exhaust and intake stale air through ventilating ducts; Helps boosting airflow for HVAC units; Perfect for bathrooms, workshops, basements and attics and more
Grow Room Applications - Use it as intake fan and bring fresh air into grow rooms or tents; Can be used as an exhaust fan in smaller set ups
Functional & Friendly Design - Comes with galvanized steel sheet housing and dual crimped flanges on both sides to hook-up with duct easily; Solves air delivery problems without major system rework or expense
Description
Solve air delivery problems without major system rework or expense. The duct fan is able to boost airflow, used as intake fan to bring fresh air into targeted space. Exchanges stale air with fresh air to keep temperature or humidity under control. It is Engineered for maximum boost with minimum noise. Helps boosting airflow in HVAC units to remove exhausts and odors, ideal for cycling moisture-laden air out of bathrooms, kitchen, attics, greenhouses, tents, grow rooms, light reflectors or other applications.Specification:
- Diameter: 4 inch
- Air Flow: 65 CFM
- Power: 120V/110V 60Hz 12W
- Cord Length: 5.9 feet
- Overall Dimensions: 4" (Diameter) X 7" (Length)
Package Content:
- 1 X Inline Duct Fan Booster - (4 Inch, 65 CFM) Exhaust Blower Vent Air Extractor Ventilation System HVAC Low Noise Quiet Operation with Aluminum Blade & Grounded Power Cord
4. NuTone 9093WH Deluxe Heat-A-Ventlite Heater with Ventilator and Incandescent Ceiling Light, 70 CFM 1500-Watt, White
Feature
1500W heating element and 70CFM ventilation fan provides optimum performance in bathrooms up to 100 square feet, so you can have a touch of heat just when you need itBright 100W incandescent lighting provides clean, even light for pleasant surroundings and enough light to focus on the details
7-watt nightlight provides a soft glow to light your bath during those nighttime visits
3.5 Sone sound level
Four-function wall switch included so you have the right switch to control all functions right out of the box
Description
You dont need to heat the entire house to have a comfortable bathroom first thing in the morning. And it simply doesnt make sense to wait for your central heating system to do what NuTone can do instantly. This Heater/Fan/Lighting combination provides powerful heating and ventilation at the touch of a switch.5. HG POWER 3 Inch Round Air Vent ABS Louver Grille Cover White Soffit Vent with Built-in Fly Screen Mesh for Bathroom Office Kitchen Ventilation
Feature
Built in fly screen mesh: it helps to prevent pests from entering your homePremium material: new high quality ABS was adopt, environment friendly, low noise and non-toxic.
Easy to use: the white panel can be freely detached, very convenient to clean and maintain.
Easy to install: available for wall mounted or ceiling mounted.
Diameter of 3 Inch, stylish design, ideal for room exhaust and ventilation use.
Description
Specification:material: ABS
size: 3 inch
color: white +black
Ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat
transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses.
6. Hon&Guan 4" Extractor Fan Circular Centrifugal Ventilation System Exhaust Air for Bathroom Kitchen Inline Round Duct Fan (4 Inch)
Feature
Hon&Guan Circular Centrifugal High CFM Inline Ducting Fan Hydroponic Air Blower Heat Air Conditioning Vent ExhaustDiameter 4 Inch (100 mm), High air flow 176 CFM (300 m/h), 70 W power and high performance 2550 RPM.
The shell and blades are made of ABS plastic, one-time disposable molded, with high anti-acid function. Design by hydromechanics to reach the optimal air and pressure.
NSK ball bearing, acceptable for continuous operation of 50000h.
IP44 Protection class, waterproof and dustproof more effective. Run the ambient temperature range: -20C~60C.
Description
Hon&Guan, Professional Ventilation Equipment ManufacturerHon&Guan which focuses on the R&D manufacturing of air replacement, fresh air ventilation and ventilation equipment, is a modern high-tech enterprise with main products such as mixed flow inline duct fan, ventilation fan, AC and DC fans.
Meet Safety Standards
All of our products comply with CCC CE, SAA certification, especially we own several patents for our mixed flow fan products. We are at the forefront of overall strength and brand influence in the ventilation industry.
HEE-100S Parameters
- Voltage: 110-120 V
- Frequency: 60 Hz
- Power: 70 W
- Speed: 2550 (RPM)
- Air Volume: 300 m/h
- Air Pressure: 350 Pa
- Noise: 40 dB
- Life: Over 50000 Hours
- Weight: 2.3 KG
- Current (Amps): 0.71
- Electric Current Type: AC
- Material: ABS Plastic
- Item Dimensions: 11.2*9.6*7.6 Inch
- Diameter: 4 Inch (100 mm)
Excellent Customer Support
We keep working hard at increasing our advantages in pre-sale, sale, after-sale and other aspects by continuous improving our service and products. Our dream is to make Hon &Guan the leading brand in medium and high ventilation products.
7. vinmax Solder Fume Absorber Smoke Extractor Air Filter Fan Portable Ventilation System Adjustable Angle with Activated Carbon Filter for Soldering Work Benchtop Station US Shipping
Feature
Strong durability ,Less noise , revolving stably .The activated carbon filter may absorb toxic flux and lead produced by soldering works to prevent inhaling these gases ,good for health .
Breathe easily with this smoke absorber which removes soldering smoke and fumes quickly, safely and efficiently.
The smoke absorber can be placed vertically (standing up) and horizontally (laying down), or be mounted onto a bracket;When the smoke absorber is placed vertically, it can absorb a wide range of smoke;When placed horizontally, it can save space in height and absorb smoke powerfully.
It is a indispensable tool for safe and comfortable working environment to ensure health of soldering workers.
Description
Description:A soldering flux is required in soldering and the main
ingredient of soldering flux is rosin. Rosin mainly consists of
abietic acid, which will be transformed into neoabietic acid
under high temperature. In this process, the toxic components
will be produced and volatilized into gas, which causes headache, dizzy, vomit, eye disease etc.
This soldering absorber possess with activated carbon filter,
which can effectively absorb toxic gases and provides a safe working condition.
Features:
1.The filter consists of foam and activated carbon, Which is ideal for absorbing toxins
2.Adjustable absorbing angle
3.Low noise and high- efficient fan
4.Made of antistatic material
5.Easy to replace filter
Specification:
Main:
Power supply: AC110, 60Hz
Power consumption: 16W
Inlet concentration: 2(mg/L)
Dimensions: 8.7 x 10.6 x 6.6 in
Activated -- Carbon filer:
Size: 5.1 x 5.1 x 0.4 inch
Amount of activated carbon filter: 7g
Max. Absorbing weight of components per one filter: 2g
Package includes:
1*soldering absorber
1*manual
8. Extract-All Ductless Air Cleaning Fume Extractor, 415 CFM Table-Top Spray Booth
Feature
Noise level: 55 dBA at 5'Blower/motor assembly: 120 volt, single phase, 60 hertz; 1.3 amps, 1100 RPM; totally enclosed, thermally protected; ball bearing
Comes with Poly-Ring Panel Prefilter
Rated fan performance: 415 CFM at 0.5" E.S.P.; 235 CFM at 1.0" E.S.P., 125 CFM at 1.2" E.S.P.
Extract-All units feature a full three year warranty
Description
A compact, bench-top, ductless air cleaning system and Spray Booth that is completely self- contained; with a 2-ply, dual density polyester panel prefilter, removable hinged inlet grille, and easy access blower. The Clean Air Station... Portable - Versatile - Economic! Ideal for countless applications. Removes airborne contaminants before they can escape into the workplace. Add your choice of primary and final stage filter combinations and one of the three acrylic inlet capture hoods. Depending on the filter combination you choose, the Clean Air Station will remove the smoke, dust, aerosol overspray and odors, and gaseous fumes found in the workplace. Typical Motor Life: 100,000 hours (depending on operating conditions, including ambient temperature, duty cycle, etc.) Cabinet measures, without acrylic hood: 24" width by 24" height by 14" depth.9. Hon&Guan 5 Inch Extractor Inline Duct Fan with Timer Delay High Efficiency Mixed Flow Ventilation System Exhaust Air for Bathroom Kitchen Powerful & Silent Inline Fan 167 CFM(HF-P Series)
Feature
Moves air at a rate of 167 CFM, perfect for your bathroom and utility rooms.Notes: no plug, you can wire on a standard house plug.Long life ball bearing motor (up to 50,000 hours) with thermal overload protection, Sound at high speed operation is quiet.
Built-in timer can setting to delay 0~30 minutes,selectable at install.
Lightweight, durable and UV resistant plastic case provides strength for extended use.Easy to install and disassemble.Two connections ways for low speed or high speed.
Note: An ON/OFF switch must be connected when wiring the fan, otherwise tha fan will not run normally. Wrong Wiring: Directly wiring power plug or power cord on the fan to make it run.
Description
The Mixed Flow Fan can be used for exhaust and supply ventilation systems that require high pressure, powerful airflow and low noise levels,are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc.Note:the inline duct fan no plug.
Parameters of HF-125P with Timer
- Double Speed: Low/High
- Voltage: 100~120V
- Frequency: 60 Hz
- Power: 27/32 W
- Speed: 1850/2200 (RPM)
- Air Volume: 248/284 m/h
- Air Pressure: 106/159 Pa
- Noise: 26/31dB
- Life: Over 50000 Hours
- Weight: 1.5KG
- Current (Amps): 0.26/0.3
- Blade Material: ABS Plastic
- Diameter: 5 Inch (125 mm)
- Item Dimensions: 10.1*7*7.4 Inch
- Protection class:IP44
- Operating temperature:-20~60(-4-140)
Design
The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct.
Timer
The duct fan built-in timer which can set to delay 0-30 minutes off. Note: The timer in the power box of the duct fan and you can set the delay time before installation. Motor
The motor has two selectable speeds and are fitted with standard overheat protection and overload protection as well as automatic restart. The motor protection class is IP44.
Installation
The inline duct fan can be installed in the ducting one or more at any angle,vertically or horizontally.All fans can be mounted in parallel to increase the volume of air or in series to increase the pressure.
10. Hon&Guan 3 Inch Extractor Inline Duct Fan with Timer Delay High Efficiency Mixed Flow Ventilation System Exhaust Air for Bathroom Kitchen (HF-S Series)
Feature
73mm diametre,PP fan body,IP44 protection class,insulation,anti-corrosion.Two-speed,rotation speed:2550/2750(RPM)air volume:43/46(m/h).Moves air at a rate of 27 CFM, perfect for your bathroom and utility rooms.Notes: no plug, you can wire on a standard house plug.
Built-in timer can setting to delay 0~30 minutes,selectable at install.
Motor with NMB ball bearing ,more than 50,000 hours of operation time,Sound at high speed operation is quiet.
Note: An ON/OFF switch must be connected when wiring the fan, otherwise tha fan will not run normally. Wrong Wiring: Directly wiring power plug or power cord on the fan to make it run.
Description
Parameters of HF-75S with Timer- Double Speed: Low/High
- Voltage: 110-120 V
- Power: 25/29 W
- Speed: 2550/2750 (RPM)
- Air Volume: 43-46 m/h
- Air Pressure: 114/129 Pa
- Noise: 21/26 dB
- Life: Over 50000 Hours
- Weight: 1.4 KG
- Blade Material: ABS Plastic
Operating temperature:-20~60
Key Features
Design:
The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct.
Timer:
The duct fan built-in timer which can set to delay 0-30 minutes off. Note: The timer in the power box of the duct fan and you can set the delay time before installation.
Motor:
The single phase ball bearing motor has two speeds and is equipped with standard thermal overload protection (STOP) with automatic restart. Motor protection rating IP44 and are fully speed controllable. Complies with part F building regulations and designed for ambient temperatures -20~60C. Supply voltage 100V~120V, 60HZ.
Mounting:
The fan can be mounted in line or at either and of the duct run and at any angle. Horizontally or vertically. All fans can be mounted in parallel to increase the volume of air or in series to increase the pressure. The casing is fitted with a mounting plate. The mounting box can be rotated to be installed in any positon for easy installation and connection.
Application
The Mixed Flow Fan are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc.
Recent Comments