The 10 best air solenoid valve 12v 2019
Finding the best air solenoid valve 12v suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best air solenoid valve 12v
1. Baomain Solenoid Valve 4V210-08 DC 12V PT1/4 2 Position 5 way Base Muffler Quick Fittings Set
Feature
Coil Voltage: DC 12VPosition & Way: 2 Position 5 Way
Port size: PT 1/4; CV value: 0.78
Quick Fitting Inner Dia.: Solenoid Valve: 6mm; Base: 8mm
Weight: 1344g
Description
2. Baomain 4V210-08 DC 12V Single Head 2 Position 5 Way 4 Pneumatic Solenoid Valve w Base
Feature
Model : 4V210-08; Working Voltage : DC 12VPosition & Way Number : 2 Position 5 Way;
Quick Fitting Inner Dia.: Base Part Fitting size 8mm, Solenoid valve fitting size: 6mm
Mounted Hole Dia. : 4mm/ 5/32"; Total Size : 153 x 117 x 90mm/6'' x 4.6'' x 3.5'' (L*W*H)
Weight : 1079g; Package Content : 1 x 4 Solenoid Valve w Base Muffler
Description
3. BACOENG 3/8" 12VDC VITON Solenoid Valve (1/4",3/8",1/2",3/4",1" 12VDC and 110VAC Available)
Feature
3/8" DC 12V Solenoid Valve Both power lines can be connected with positive and negative polesVITON gasket.VITON gasket.VITON gasket.
Valve Type:Direct Acting, Wet Armature
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Ideal for for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Description
BACOENG VITONNormally Closed Electric Solenoid Valve;
3/8"ports, BRASS body, Viton seals, 12 volt DC, for air, water, or fuel
Thiselectric solenoid valve is constructed with a high-qualitybrass body, two-way inlet and outlet ports with one-quarter inch (3/8") female threaded (NPT) connections, and heat and oil resistant Viton seals.
The coil uses alternating current and energizes at12 volts DC; voltage range + or - 10%. 18 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
3/8" (14 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv).
Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Manufactured in China. Model: USS2-00066. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
4. Baomain Pneumatic Air Control Solenoid Valve 4V210-08 DC 12V 5 Way 2 Position PT1/4" Internally Piloted Acting Type Single Electrical Control
Feature
Model : 4V210-08; Operation Type : Internally Piloted Acting TypeType: 2 Position 5 Way; Power Consumption : DC 12V; Operating Pressure: 0.15 ~ 0.8MPa
Position & Way Number : Two-position, Five-way; Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''
Total Size(Approx) : 110 x 66 x 22mm / 4.33" x 2.6" x 0.86" (L*W*H)
Weight : 205g; Package Content : 1 x Solenoid Valve
Description
5. 1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.
Feature
VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in U.S..
SOLID BRASS. This valve's body is made of solid brass (very corrosion resistant material).
WARRANTY-all U.S. Solid valves come with a 1 year warranty. Contact [email protected]
DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.
Description
1/4" NPT port, brass body, VITON seals, 12 volt DC, for air, water, or fuel (disel, gasoline, oils and other hydrocarbons).
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals.
The direct current coil energizes at 12 volts DC; (It doesn't not matter which line is positive and which is negative, the valve will energize identically) Voltage range + or - 10%. 12 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60F with a pressure drop of 1 PSI (0.23 Cv).
Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank, auxiliary gas tanks and many other.
Manufactured in China. Model: USS2-00051. Quality assurance and/or conformity managed in accordance with standards:
6. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized) ; Port Size: 1/4" Female Port Coil Voltage: DC12V Service Media: Air, Gas, Liquid, Water ; Operation Model: Direct Acting; Flow Model: Uni-DirectionalThis solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
100% Brand New By AOMAG. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Description
Description : 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air ValveWIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves.Specification :
Model Number : 2ACK-1/4-12VDC-G
Valve Type : 2 Way Normally Closed (Valve opens with energized)
Service Media : Air, Gas, Liquid, Water
Operation Model : Direct Acting
Flow Model : Uni-Directional Flow Rate : 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow) Response Time : Less than 20 msBody Material : Anodized Aluminum Seal Material : NBR (Buna N) Armature Tube Material : Brass Plunger & Spring
Material : Stainless Steel Coil
Certification : CE Certification
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE Certification)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 C
Port Size : 1/4" Inch NPT Female Port
Coil Voltage : 12V DC
Voltage Tolerances : DC : +10% -5% ; AC : +10% -15%
Electrical Connection : Grommet Coil with 12" Lead Wire2ACK Series Electric Solenoid Valve Dimensions :
Package included : 1 x 1/4inch DC 12V Electric Solenoid Air ValveDetails pictures
7. HFS 110v Ac or 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4", 1/2", 3/4", 1" NPT Available (12V DC 1/4" NPT)
Feature
This 12V DC brass electric solenoid valve easily replaces broken valves for use with water, air, andDurable brass construction and a quality copper solenoid are made to last. Size: 1/4"NPT
This valve is N/C (normally closed), meaning it is closed when power isn't supplied.
The unit operates on 12V DC power and can withstand temperatures of 23F to 176F.
We have solenoids available in AC/DC and various size NPT threads as we
Description
This 110V AC brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids. Durable brass construction and a quality copper solenoid are made to last. This valve is N/C (normally closed), meaning it is closed when power isn't supplied. The unit operates on 110V AC power and can withstand temperatures of 23F to 176F. This unit fits a 1/4" NPT thread.We have solenoids available in AC/DC and various size NPT threads as well.
SPECIFICATIONS:
110V AC
Working Pressure: 0-100PSI (7Bar)
Normally Closed (Opens when powered)
Semi-Direct lift valve. Suitable for gravity feed.
Temperature Range: 23F to 176F
Orifice: 20mm
Length: 3.3"
Width: 2.5"
Height: 4.3"
1/4"NPT Both Ends
WARNING: Not for use with flammable gas or liquid. This valve is NOT explosion proof.
8. Kleinn Air Horns 307 Vortex 4 12-Volt Air Horn Solenoid Valve
Feature
Inlet: Brass fitting for 1/4 inches outer diameter air tubeOutlet: 1/4 inches Male NPT
Orifice: 4 millimeter
Maximum pressure: 175 PSI
Description
Standard chrome cylindrical air horn solenoid valve that is used on most Kleinn air horns.9. 1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
Feature
U.S. Solid valve- industrial grade products.1/2" Stainless Steel direct acting with VITON gasket.
ISO/OEM/ODM/CE
1 year warranty. Contact [email protected]
Versatile, small, responsive, light and durable.
Description
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a stainless steel body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Model: USS2-00069
Size: 1/2"
Flow Aperture: 16 mm
Body Material: Stainless steel
Gasket / Diaphragm / Seal: VITON
Rated voltage: DC 12 V, 10%
Current: 1.667 A
Power rating: 20 W
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 4.8 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
Quality assurance: CE Certified
10. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized)Port Size: 1/4" Female Port
Coil Voltage: DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting; Flow Model: Uni-Directional
Description
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Port Size: 1/4" Female Port
Coil Voltage: AC220V, DC24V, DC12V
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting
Flow Model: Uni-Directional
Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Operating Pressure: 0 - 0.8Mpa(can be operated at 0 PSI (Vacuum))
Recent Comments