Looking for a voltmeter reader? Have a look at this 2019 guide!
When you want to find voltmeter reader, you may need to consider between many choices. Finding the best voltmeter reader is not an easy task. In this post, we create a very short list about top 9 the best voltmeter reader for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 voltmeter reader:
Best voltmeter reader
1. Digital Voltage Meter 12V, DROK LED Display Voltmeter Panel Precision Variable 2 Wires 3 Digits DC3.5-30V Voltage Tester 12V/24V Volt Reader Gauge Car Vehicle Solar Boat Battery Monitor Detector
Feature
DROK digital voltage meter is designed with small size (48 x 29 x 21.5 mm) and wide voltage measuring range is DC3.5-30V.The voltmeter panel is two-wire connection, simple and convenient, with high accuracy of +/- (0.5% + 2 Digit).
Our battery meter requires no extra power supply, meaning the tested voltage could work as a power supply.
This volt reader module is not fit for 24V truck for the voltage of a fully-charged truck battery is above 28V.
The voltage tester is with anti-reversed connection protection prevents the meter from burning, hence safe to use.
Description
Parameters:Dimensions: 48 x 29 x 21.5 mm / 1.77 x 1.14 x 0.85 inches (L*W* H)
Cutting size: 45.5 x 26 mm / 1.79 x 1.02 inches (L*W)
The minimum input: 3.50V DC
The maximum input: 30.0V DC
Measurement range: DC 3.50 - 30.0V
Measurement accuracy: +/- (0.5% + 2 Digit)
Display mode: Three 0.56 LED digital tube
Update rate: About 500 ms/time
Lead wire length: 14 cm / 5.51 inches
Operation temperature: -10 c to 65 c
Protection: Anti-reverse protection
Wiring:
Red wire: please connect the red wire to positive pole of power supply(Power Supply +) or positive pole of measured voltage(Measure Voltage +)
Black wire: please connect the black wire to negative pole of power supply(Power Supply -) or negative pole of measured voltage(Measure Voltage-)
Note:
1.When truck battery is fully charged, its voltage is about 28V. And if the truck starts immediately,the pulse
interference is likely to damage the meter.This meter does not fit 24V truck.So if you want to use a meter in
such a situation, please choose a 15-80V voltmeter.
2.Please note that its starting voltage is low and could be merely 3.5V
Package Included:
1x Digital Voltmeter
2. DROK USB Tester, USB-A 2.0 Digital Multimeter Dual USB Output Ports PD QC 3.0 Protocol with Color LED Display, Battery Charger Power Monitor, 7 Modes Capacity Voltage Current Power Display Voltmeter Ammeter for Laptop Power bank Phone Solar Panel
Feature
*7-MODE USB MONITOR* With 7 different modes, DROK USB tester can be used to measure voltage, amperage, capacitance, power going to your phone/battery pack. One button operation, simple and handy.*DUAL COLOR LED* Our USB charger tester Red and Blue color dual LED display, which is bright and easy to monitor the charge voltage and current of your digital USB devices to ensure the optimal charge rate.
*DUAL USB OUTPUT* There are two USB output available which can be used simultaneously. Output I can be used for device charging and data transfer, while output II is only for charging your mobile phones, tablet PCS and etc. Output I Support QC 2.0 9V & 12V charging, but don't insert any device in Output II when using QC 2.0 Charging.
*MULTIFUNCTION* Our multiple USB Detector can be used for capacitance checking, capacitance clear, over voltage and under voltage alarm, over-current, and short circuit alarm, easily test the power/quality of the chargers and USB cables.
*100% RISK-FREE SATISFACTION GUARANTEE* We offer you 100% risk-free satisfaction guarantee to let you buy with confidence.
Description
Is your mobile device not charging properly, and you suspect the new charger that you bought recently?Do you want to check If your solar charger is giving proper current for your mobile device?
Specification:
Input voltage : 3.20 - 15.0V
Resolution: 0.01V (<10V); 0.1V (>/=10V)
Measuring current: 0.00 -3.00a (10a max, but cannot work in 10a for long time)
Resolution: 0.01A
Capacitance measurement: 0-99999 MA/H
Capacitance accumulation: Yes
Power testing: 0.00-9.99-99.9W
Over-voltage alarm: when voltage >/=5.6V, voltage digital point will Flash quickly
Lacking-voltage alarm
Over-current alarm : when current >/=3A, current digital point will Flash quickly
Short-circuit alarm: current digital point will Flash quickly dual USB output
Output I (dual function - device charging and data transfer)
The charging current, in this case, is determined by compatibility. you can view the voltage and current values at the same time.
Output II (device charging only)
The built-in intelligent charging control IC matches the most appropriate and safest current for your devices automatically. It is used mainly for non-original chargers, but it is suitable for original chargers as well. This universal USB gadget is suitable for most of the mobile phones, mobile power, tablet PCS and other USB devices, like BC1.2, yt/d1591-2009 and non-bc1.2 (including iPad, iPhone and Samsung Galaxy).
Get yours today by clicking add to cart above!
3. Voltmeter Display, DROK 2 Wire AC 60-300V Red LED Panel Digital Voltage Reader Meter 110v 220v Volt Monitor Tester Industrial Electrical Gauge
Feature
DROK digital display voltmeter working voltage range is AC 60-300V, the min resolution ratio is 1v, measuring accuracy is (2 digits).Application: the voltage meter can be widely used in voltage stabilizer, distribution cabinet, distribution box, timing device, transformer substation and all grid equipment meter.
Special Features: the volt tester is with good stability, high measurement precision and high anti-interference ability.
Two-wire Installation: the volt detector is designed with only two wires, the wiring is simple.
Small Size: the voltage monitor panel is adopted standard size 79x43x25mm, easy to install.
Description
DROK AC 110V 220V Voltmeter Display
Parameters:
Working voltage: AC 60-300V
The minimum resolution ratio: 1V
Measuring accuracy: 1% (2 digits)
Display way: 0.56"LED Red
Measuring rate: 2times/S
Working temperature: -10+55
Working humidity: 10 ~ 80% (no frost)
Working pressure: 80 ~ 106 kPa
Sun: no directly sunshine
Size794325 mm
Hole size7539.5 mm
Notes:
The voltmeter is designed with the principle of capacitive hypotension, the higher frequency, the smaller the impedance of the capacitor. Therefore, it is not suitable for high-frequency electronic speed regulation non - city electric sine wave frequency or other high-frequency components; otherwise, it will be easy to burn out.
Package Includes:
1*AC 110V 220V Voltmeter Display
4. DC Voltmeter Ammeter Panel, DROK 0.96" OLED Display Digital Multimeter DC 0-33V 3A 0-99h59min 99W -15~~60 Run Time Temperature Power Capacity Energy Monitor Meter Gauge 12v 24v Battery Tester
Feature
DROK 7in1 digital multimeter voltage measurement range is DC 0-33V, current measurement range is 0-3A, time measurement range is 0-99h59 min, capacity measure range is 0-99.999Ah, energy measure range is 0-999.99WhButton Function: in display interface,short press button to switch data set;long press button to clear data to zero
The voltmeter ammeter adopts 0.96'' OLED monitor, compact parameter display, simple interface
The voltage current meter panel fits with flexible power supply, simple installation
Note: please ensure proper wiring in strict accordance with the wiring diagram
Description
Technical Parameter:Voltage Measure Range: DC 0.00-33.00V
Current Measure Range: DC 0.000-3.000A
Time Measure Range: 0-99h59 min
Power Measure Range : 0-99.00W
Temperature Measure Range: -15C~60
Capacity Measure Range: 0-99.999Ah
Energy Measure Range: 0-999.99Wh
Voltage Measure Accuracy: (0.3% + 2 digit)
Current Measure Accuracy: (0.8% + 3 digit)
Product Size: 48 29 22 mm
Button Function Instruction
In the display interface, press the button to switch data set; long press button to clear the accumulated data to zero.
Note:
1. The component aging and temperature variation after long-term use may appear tiny error when measuring small current. To avoid this error, you can unplug the current wire socket and then long press the button to power it until the screen display AAA, then loose button.
2. Please ensure proper wiring in strict accordance with the wiring diagram.
Package Includes:
1 x OLED Multimeter
5. Waterproof Voltmeter, Mini Digital Display Voltage Meter DC 12V-24V Green LED Tester for Car Motorcycle Auto Truck Campervan
Feature
Mini voltmeter to monitor your vehicle battery status, with reverse connection protection function, line will not be burnt.Waterproof and CE Certification, Made of environmental protection against fire retardant materials, Easy to use and install.
Ideal for 12-24V Car / Boat / Marine / Vehicle / Motorcycle / Truck / ATV / UTV / Camper / Caravans / Travel / Trailer etc.
Twist-and-Lock system. Display: 3-bits, LED digital tube, led display is green.
Mounts in a 1-1/8" hole in panels up, 0.25" thick, a nylon retaining nut holds the meter in place.
Description
Our voltmeter is high quality with competive price, it's the best choice for your battery.Fit most of Applications, such as: Marine cockpits, caravan applications, trucks, 4x4s and RV's.
Specifications:
Waterproof
Color: Black
LED Display: Green
Measure Voltage: 6 - 30V
Input Voltage: DC12V - 24V
Size: 1.4" x 1.4" x 0.5"
Interface Type: Anode and cathode
Meterial: Eco-friendly Plastic
Application: Universal for all Cars, motorcycles and other universal models.
Package includes:
1 x LED DC Voltmeter
2 x Insulated Terminals
6. LtrottedJ DC 0-30V LED 3-Digit Display Voltage Voltmeter, Motorcycle Ammeter Blue
Feature
voltmeter digital leads gauge display cigarette lighter probes car usb test alligator clips fluke klein plug monitor jeep for motorcycle kit aligator waterproof 12v equus red mount socket charger battery audio switch fastammeter gauge clamp dc shunt digital ac voltmeter analog with <100 panel fluke car 100a usb mount display milliamp wireless in line guage 10a 100v 120v test leads hall effect iphone drok 200a 20a klein arduino 0-100a solar ma 500a 12v lcd 50ma and amp automotive blue motorcycle 300a tractor inductive for generator
volt voltron legendary defender battery voltage meter voltmeter regulator air compressors power supply lighting led lights wheels heater water pumps refrigerator converter golf cart batteries cooler outlet strip tester dewalt extension cord charger connectors lithium to tv conditioner tools solar panel fan rechargeable 7ah transformer cr123a black and decker for smoke alarms inverter dvd combo rv fridge coffee makers switch detector hydraulic pump usb adapter winch lantern landscape amp plug cr
amp wiring kit and amplifier kitmeter meter volt water ruler stick e scientology ph for electric electrical gas power cycling moisture wood health o scale reader light photography tape measure clamp bike soil in inches multi digital key music newton torque wrench pedals plants glucose ohm vape radio leads valve lumens tds tester voltage base socket ham meters above the sky antenna fluke smart guard calibration solution battery 12v pinless bluetooth g measuring wheel mobile multimeter with break
digital camera frame marketing scale antenna picture clock antennas for tv watch photo frames piano caliper converter box thermometer men womens audio cable multimeter wall nomad hdtv tape measure optical recorder kids measuring gram juice voice timer alarm analog drawing tablet meat pregnancy test western external hard drive food 1tb instant read microscope pocket bathroom 4tb video tire pressure gauges door lock large display level 2tb kitchen radio angle finder hygrometer humidor safe gift ca
Description
DC 0-30V LED 3-Digit Display Voltage Voltmeter Motorcycle AmmeterFeatures:
100% Brand new and high quality.
Quantity:1
Material: Plastic Alloy
Measuring range: DC 0V--30V.
Input range: DC 5V-30V(Max Input: DC 30V. The device can be damaged if input is over 30V).
Working Current: Blue< 13mA.RED< 23mA.
Display Color: Blue. RED
Display: Three 0.56 digital tube.
Measurement accuracy: 1%.
Refresh rate: about 300mS / times.
Input impedance: > 100K.
Size:2.8cm x 4.7cm x 2.1cm.
Weight:15g
Wiring:
Red: power supply +.
Black: power supply -, measure -.
Package Include:
1pcs DC 0-30V LED 3-Digit Display Voltage Voltmeter Motorcycle Ammeter(without retail package) voltmeter tester leads car cigarette lighter gauge fluke display test multimeter usb motorcycle ac probes for ammeter audio panel analog 12v pen battery <100 led digital marine module cables alligator clips mount a lcd dc dial kit rs232 rv guage 48v
7. WOSOSYEYO AutoLink AL519 Scanner Car DTC Reader Scan OBDII Auto Diagnostic Tool Code( Color:Black & Red)
Feature
1. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.2. Features the unique patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification.
3. Easy-to-read AVOmeter allows you to test voltage, continuity and current at the fingertip, determines the cause of the Check Engine Light (MIL),turns off Check Engine Light (MIL), clears codes and resets monitors
4. Capable of diagnosing 12V charging systems, starting systems and condition of discharged battery.
5. Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification.
Description
Description:
1.Retrievesgeneric(P0,P2,P3,andU0),manufacturerspecific(P1,P3,andU1)codesandpendingcodes.
2.DisplaysmonitorandI/Mreadinessstatus(emissions),readslivePCMdatastream,liveO2sensortestdata,freezeframedata.Memory/batterybackupforoff-vehicledatareviewandanalysis
3.Internetupdateableandupgradeable,printsdataviaPC.
Specification:
Color:black&red
HardwareVersion:AL519
OperatingTemperature:0to60C(32to140F)
StorageTemperature:-20to70C(-4to158F)
ExternalPower:8.0to18.0Vpowerprovidedviavehiclebattery
Carcoverage:SupportAllOBD2Carsafter1996years
PackageInformation:
PackageWeight:900g/1.98lb
PackageSize:190x260x90mm/7.48x10.24x3.54in
GeneralBoxPackage
PackageIncluded:
1xAutoLinkAL519
1xUser'smanual
1xCD
1xUSBcable
1xOBDIICable
1xCarryBag
8. Pukido DIY Kit Module Digital DC5V 35mA Voltage Current Voltmeter Ammeter Sets Diy Electronic Kits
Feature
Output type: ShowDiy supplies: Metalworking
Model number: Accessories
Description
DIY Kit Module Digital DC5V 35mA Voltage Current Voltmeter Ammeter DIY Electronic Clock SetsLCD Display Red LED Digital Voltage Current Voltmeter Ammeter DIY Electronic Clock Parts Kits
Specifications:
Mechanical rigidity: flexibility
Number of layers: single side
Base material: Copper
Weight: approx. 54g
PCB Size: approx. 70.6*39mm/2.77*1.53''
Gauge outfit Installation hole size: 77*40mm/3.03*1.57''
Display window size: 51*24mm/2*0.94''
Package size: 160*120*25mm/6.29*4.72*0.98''
Working voltage: DC5V
Working current: 35mA
Measurement accuracy: 1mA
Measurement range: 0~2A
Super range display: first display 1 or -1
Display color: Red
Note:
Please allow 1-3cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x PCB Board
1 x 1N41483
1 x 5.1V Voltage Regulator Diode
1 x 2W 0.1 ohm Resistance
1 x 100 ohm Resistance
1 x 270 ohm Resistance
2 x 2Kohm Resistances
1 x 20Kohm Resistance
1 x 47Kohm Resistance
1 x 56Kohm Resistance
1 x 100Kohm Resistance
1 x 1M Resistance
1 x 2.2MH Inductor
2 x 104 Single Stone Sapacitors
1 x 101 Single Stone Sapacitor
1 x 103 Single Stone Sapacitor
1 x 224 Single Stone Sapacitor
1 x 474 Single Stone Capacitor
2 x 10UF25V Electrolytic Capacitor
1 x C1815
1 x TL431
1 x 3296-102 Potentiometer
1 x XH2.54-2P Straight Seat
1 x XH2.54-2P Cable
1 x KF301-2 Seat
1 x 40P Chip Seat
1 x LT7107 Chip
4 x 0.56 One Bit Digital Tubes
1 x Clock Case
4 x M2*6 Screws
1.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly
9. UCTRONICS 0.36 Inch Mini DC Voltmeter 2 Wires 3-30V LED Display Digital Voltage Tester Meter, Pack of 5, Blue
Feature
Detection Voltage: DC 3V-30V. Working Voltage: DC 3V-40VMounting Hole Center Distance: 1.1" (28mm). Wire Length: about 6".
Can be calibrated: the screw on the back can be tuned to calibrate. ReversePolarityProtected: it will not be burned when the connection is reverse.
The decimal point shifts automatically: the meter shows twodecimal places when measuring the voltage below 10V; it shows onedecimal place for voltage above 10V.
Note: the input voltage must not exceed 40V, otherwise there is a danger of burning!
Description
UCTRONICS 0.36 inch blue mini digital voltmeter is a 2-wire DC 3-30V voltage tester meter. It lets you simply and accurately measure the voltage of motorcycles, automobiles, 18650 batteries, lithium-ion batteries of mobile phones, Ni-MH Batteries and otherbatterypacks.SPECIFICATIONS
Quantity: 5 pcs
Color: blue
Detection Voltage: DC 3V ~ 30V
Working Voltage: DC 3V ~ 40V
Display: 0.36" LED
Wire Length: about 6"
Mounting Hole Center Distance: 1.1" (28mm)
Refresh Rate: about once per second
Accuracy: 1% (+/- 1 digit)
Operating Temperature: 14 ~ 149 F(-10 ~ 65 C)
FEATURES
Can be calibrated: the screw on the back can be tuned to calibrate.
ReversePolarityProtected: it will not be burned when the connection is reverse.
The decimal point shifts automatically: the meter shows twodecimal places when measuring the voltage below 10V; it shows onedecimal place for voltage above 10V.
Recent Comments