Looking for a stratocaster neck compound? Have a look at this 2019 guide!

Shopping for the best stratocaster neck compound is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy stratocaster neck compound. Don’t worry any more! We spend many hours to review and compare stratocaster neck compound to make the short list for you. Let’s check which product is suitable with you.

Best stratocaster neck compound

Product	Features	Editor's score	Go to site
	Fender USA Stratocaster Neck - 22 Fret - Maple Fingerboard with Compound Radius		Go to amazon.com
	Mighty Mite Neck for Strat Guitar, Maple Fingerboard		Go to amazon.com
	Fender American Stratocaster Neck		Go to amazon.com
	Mighty Mite Stratocaster Compound Radius Replacement Guitar Neck - Maple Fingerboard		Go to amazon.com
	Mighty Mite Neck for Strat Guitar, Rosewood Fingerboard		Go to amazon.com
	Fender American Stratocaster Neck		Go to amazon.com
	Fender American Channel-bound Stratocaster Neck - Rosewood Fretboard		Go to amazon.com
	Mighty Mite Neck for Tele Guitar, Rosewood Fingerboard		Go to amazon.com
	Mighty Mite Neck for Strat Guitar, Compound Radius, Maple Fingerboard		Go to amazon.com
	Mighty Mite Neck for Tele Guitar, Maple Fingerboard		Go to amazon.com

Related posts:

1. Fender USA Stratocaster Neck - 22 Fret - Maple Fingerboard with Compound Radius

Feature

Maple neck
Maple fingerboard
Pre-slotted synthetic bone nut
Six two-guide-pin tuning machine holes
Limited Warranty Included

Description

Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. Contours, finishes, fret sizes and all other materials are designed and crafted in genuine Fender fashion. U.S.-made Deluxe necks have detailed frets, tinted satin finishes on the back, hand-rolled fingerboard edges and a slim modern C profile for comfortably smooth playability. The nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock decal. The neck is also pre-drilled with five holes to accommodate a traditional four-bolt or offset four-bolt neck-mount design.

2. Mighty Mite Neck for Strat Guitar, Maple Fingerboard

Feature

Shaped, inlaid, fretted and finished-feels and plays great
Hard rock maple finished in clear satin polyurethane
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)

Description

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

• The frets are nicely finished.
• The string nut is slotted and shaped from PPS plastic with a flat bottom.
• Maple fretboard with dot inlays and side markers.
• Screwholes for attaching to the body are not drilled.
• Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
• Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

• Scale length: 25-1/2" (647.70mm)
• Width at nut: 1-11/16" (42.86mm)
• Width at 22nd fret: 2-3/16" (55.56mm)
• Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
• Fretboard radius: 9-1/2" (241.30mm)
• Fret count: 22
• String post spread: 4-11/16" (119.06mm)
• Approximate heel length: 3-5/8" (92.07mm)
• Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

• .860" (21.84mm) at the 1st fret
• .880" (22.35mm) at the 6th fret
• .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

3. Fender American Stratocaster Neck

Feature

Chrome decal on headstock
22 medium-jumbo frets; large pearloid dot inlays
Compound-profile "C" to "D"-shaped neck
9.5"-14"-compound-radius fingerboard
Satin urethane with gloss urethane headstock face

Description

Crafted in the same facility as our U.S.-made instruments, the American Elite Series neck offers the best of both worlds by combining top-of-the-line, classic Fender design with the modern, smooth playability of a Fender compound-profile neck. A modern "C"- shape at the nut, the rear of the neck morphs along the length of the neck to a modern "D"-shaped profile at the neck heel. A thoughtfully contoured 9.514-radius fingerboard gives players outstanding comfort and seamless movement along a satin urethane-finished neck. Setups and adjustments are a breeze with the 2-way adjustable truss rod at the heel, without the need for special tools. We recommend a Fender Authorized Service Center to install the American Elite Series neck, as it may be necessary to modify the body to install due to the truss rod adjustment wheel placement.

4. Mighty Mite Stratocaster Compound Radius Replacement Guitar Neck - Maple Fingerboard

Feature

Carefully hand selected here at Ant Hill Music before being sold.
Neck: North American Maple; Fingerboard: North American Maple
Adjustable truss rod; silver frets; position markers (including sides); slotted nut
Nut: 1-5/8"; Scale length: 25.5"; E to E: 1-3/8"; Peg holes: 3/8"; Heel thickness: 1"; Heel width:2-3/16"; Frets: 22 Medium jumbo; Radius: 9.5"-12"
Part Number: MM2902CR

Description

Fender Licensed All Maple Replacement Stratocaster Neck with Compound Radius by Mighty Mite- MM2902CR Factory First A Stock, licensed by Fender, Stratocaster neck. This brand new Mighty Mite model 2902CR replacement stratocaster neck is completely shaped, fretted, inlaid and finished in a satin, oil based poly.These necks are made from the finest Northern Michigan or Canadian Hard Rock Maple and are comparable in quality and design to the best original factory necks. They use only the finest American and Canadian wood available. Due to certain manufacturing processes that are no longer available here in the US, the wood is shipped all the way to Korea for processing, and then shipped back to mighty mite for distribution. Why? Tone! Some material from over-seas is moist, and doesn't resonate well at all. Our product...AWESOME! Adjustable truss rod at the headstock, installed pre slotted nut, dot position markers, side dot markers and nickel silver frets are installed. Stock photos are used, but we do hand select and inspect each neck before we sell them! This ensures that the neck you get is just as stunning if not more impressive than the one in the photos. Features Licensed Fender Stratocaster with Compound RadiusNeck: North American MapleFingerboard: North American MapleAdjustable truss rodNickel silver fretsDot position markers (including sides)Pre slotted nutNut: 1-5/8"Scale length: 25.5"Peg holes: 3/8"Heel thickness: 1"Heel width: 2-3/16"Frets: 22 Medium jumboRadius: 9.5-12"Part Number: MM2902CR

5. Mighty Mite Neck for Strat Guitar, Rosewood Fingerboard

Feature

Shaped, inlaid, fretted and finished-feels and plays great
Hard rock maple finished in clear satin polyurethane
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)

Description

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

• The frets are nicely finished.
• The string nut is slotted and shaped from PPS plastic with a flat bottom.
• Rosewood fretboard with dot inlays and side markers.
• Screwholes for attaching to the body are not drilled.
• Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
• Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

• Scale length: 25-1/2" (647.70mm)
• Width at nut: 1-11/16" (42.86mm)
• Width at 22nd fret: 2-3/16" (55.56mm)
• Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
• Fretboard radius: 9-1/2" (241.30mm)
• Fret count: 22
• String post spread: 4-11/16" (119.06mm)
• Approximate heel length: 3-5/8" (92.07mm)
• Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

• .860" (21.84mm) at the 1st fret
• .880" (22.35mm) at the 6th fret
• .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

6. Fender American Stratocaster Neck

Feature

Maple neck
Rosewood fingerboard
Pre-slotted synthetic bone nut
Six two-guide-pin tuning machine holes
Limited Warranty Included

Description

Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. Contours, finishes, fret sizes and all other materials are designed and crafted in genuine Fender fashion. U.S.-made Deluxe necks have detailed frets, tinted satin finishes on the back, hand-rolled fingerboard edges and a slim modern C profile for comfortably smooth playability. The nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock decal. The neck is also pre-drilled with five holes to accommodate a traditional four-bolt or offset four-bolt neck-mount design.

7. Fender American Channel-bound Stratocaster Neck - Rosewood Fretboard

Feature

Neck Material: Maple Neck Shape: Modern "C" Fingerboard Material: Rosewood Fingerboard Radius: 9.5-14 in. Compound Radius (241 mm-355.6 mm) Number of Frets: 21 Fret Size: Medium Jumbo Nut Material: Synthetic Bone Nut Width: 1.6875 in. (42.8 mm) Scale Length: 25.5 in. (648 mm) Truss Rod: Bi-Flex Truss Rod Nut: 1/8 in. American Series Tuner Mounting: 2 Guide Pin Neck Mounting: 4-Bolt
Crafted in the same facility as their U
S
-made instruments, these Channel-Bound necks combine a uniquely elegant aesthetic with a distinctively smooth fret-hand feel
The "channel-bound" fingerboard is a unique Fender innovation whereby the fingerboard is directly inlaid into the neck, eliminating the side seams while combining slick style with astounding fret-hand feel

Description

American Channel-Bound Stratocaster Neck - Rosewood Natural. Crafted in the same facility as their U.S.-made instruments, these Channel-Bound necks combine a uniquely elegant aesthetic with a distinctively smooth fret-hand feel. The "channel-bound" fingerboard is a unique Fender innovation whereby the fingerboard is directly inlaid into the neck, eliminating the side seams while combining slick style with astounding fret-hand feel. The 9.5-14 in. compound-radius rosewood fingerboard is more rounded towards the nut for easy chording, while the flatter radius in the upper register allows wide bends without fretting out. The comfortably rounded fingerboard edges and "Modern C"-shaped profile are ideal for any playing style while the medium jumbo frets offer a familiar playing feel. The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing.

8. Mighty Mite Neck for Tele Guitar, Rosewood Fingerboard

Feature

Shaped, inlaid, fretted and finished-feels and plays great
Hard rock maple finished in clear satin polyurethane
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)

Description

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

• The frets are nicely finished.
• The string nut is slotted and shaped from PPS plastic with a flat bottom.
• Rosewood fretboard with dot inlays and side markers.
• Screwholes for attaching to the body are not drilled.
• Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
• Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

• Scale length: 25-1/2" (647.70mm)
• Width at nut: 1-11/16" (42.86mm)
• Width at 21st fret: 2-3/16" (55.56mm)
• Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
• Fretboard radius: 9-1/2" (241.30mm)
• Fret count: 21
• String post spread: 4-11/16" (119.06mm)
• Approximate heel length: 3-5/8" (92.07mm)
• Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

• .860" (21.84mm) at the 1st fret
• .880" (22.35mm) at the 6th fret
• .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

9. Mighty Mite Neck for Strat Guitar, Compound Radius, Maple Fingerboard

Feature

Shaped, inlaid, fretted and finished-feels and plays great
Hard rock maple finished in clear satin polyurethane
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and compound radius fretboard (see Product Description for more specs)

Description

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

• The frets are nicely finished.
• The string nut is slotted and shaped from PPS plastic with a flat bottom.
• Maple fretboard with dot inlays and side markers.
• Screwholes for attaching to the body are not drilled.
• Has a single-action truss rod with a 4mm adjusting nut at the peghead.
• Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

• Scale length: 25-1/2" (647.70mm)
• Width at nut: 1-11/16" (42.86mm)
• Width at 22nd fret: 2-3/16" (55.56mm)
• Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
• Fretboard radius: compound, 9-1/2" - 12"
• Fret count: 22
• String post spread: 4-11/16" (119.06mm)
• Approximate heel length: 3-5/8" (92.07mm)
• Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

About the compound radius fingerboard The fingerboard surface radius gradually changes from 9.5" at the nut, to 12" at the 22nd fret (241mm to 305mm), for lower action and cleaner string bending. 14.75" (375mm) bridge saddle radius is recommended.

Neck thickness (approximate; not including fret):

• .860" (21.84mm) at the 1st fret
• .880" (22.35mm) at the 6th fret
• .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

10. Mighty Mite Neck for Tele Guitar, Maple Fingerboard

Feature

Shaped, inlaid, fretted and finished-feels and plays great
Hard rock maple finished in clear satin polyurethane
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)

Description

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

• The frets are nicely finished.
• The string nut is slotted and shaped from PPS plastic with a flat bottom.
• Maple fretboard with dot inlays and side markers.
• Screwholes for attaching to the body are not drilled.
• Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
• Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

• Scale length: 25-1/2" (647.70mm)
• Width at nut: 1-11/16" (42.86mm)
• Width at 21st fret: 2-3/16" (55.56mm)
• Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
• Fretboard radius: 9-1/2" (241.30mm)
• Fret count: 21
• String post spread: 4-11/16" (119.06mm)
• Approximate heel length: 3-5/8" (92.07mm)
• Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

• .860" (21.84mm) at the 1st fret
• .880" (22.35mm) at the 6th fret
• .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

Conclusion

All above are our suggestions for stratocaster neck compound. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using stratocaster neck compound with us by comment in this post. Thank you!