Looking for a pliers plastic? Have a look at this 2019 guide!

We spent many hours on research to finding pliers plastic, reading product features, product specifications for this guide. For those of you who wish to the best pliers plastic, you should not miss this article. pliers plastic coming in a variety of types but also different price range. The following is the top 10 pliers plastic by our suggestions:

Best pliers plastic

Product	Features	Editor's score	Go to site
	IPS PH-165 Non-marring Plastic Jaw Soft Touch Slip Joint Pliers		Go to amazon.com
	IPS PH-200 Non-marring Plastic Jaw Soft Touch Slip Joint Pliers		Go to amazon.com
	IPS SH-165S Non-marring Plastic Jaw Soft Touch Slip Joint Pliers		Go to amazon.com
	Stanley Proto J253G Proto 9-1/2-Inch Soft Jaw Cannon Plug Pliers		Go to amazon.com
	Tsunoda, PL-150SC-S PLA-iers, Replaceable Resin Jaw Pliers w/built-in-spring (6-inch)		Go to amazon.com
	Non Scratch Pliers - Tools - Tamiya		Go to amazon.com
	HDX 10 in. Soft Jaw Pliers		Go to amazon.com
	IPS Soft touch the water pump pliers (Japan Import)		Go to amazon.com
	KNIPEX Tools 98 62 02, Flat Nose Plastic Pliers 1000V Insulated		Go to amazon.com
	LIHAO Snaps and Snap Pliers Set, 375 Sets T5 Plastic Buttons for Sewing and Crafting		Go to amazon.com

Related posts:

1. IPS PH-165 Non-marring Plastic Jaw Soft Touch Slip Joint Pliers

Feature

Replaceable non-marring pads
Soft grip handles
2 position slip joint
Integrated wire cutter
High quality pliers made in Japan

Description

The IPS PH-165 pliers are a slip-joint plier with replaceable non-marring soft touch plastic pads. These pliers feature soft grip vinyl handles and have an integrated wire cutter. The Igarashi Pliers Co, commonly known as IPS, manufacturers a complete line of pliers from traditional types to the largest variety of non-marring plastic lined pliers available. IPS products are manufactured in Japan and are very good quality.

2. IPS PH-200 Non-marring Plastic Jaw Soft Touch Slip Joint Pliers

Feature

Made in Japan
2 position slip joint
Soft grip handles
Replaceable non-marring pads

Description

great set of pliers for any purpose

3. IPS SH-165S Non-marring Plastic Jaw Soft Touch Slip Joint Pliers

Feature

Weight (about): 165 g

Description

For a hobby, work. It is the resinousness that it is hard to damage.

4. Stanley Proto J253G Proto 9-1/2-Inch Soft Jaw Cannon Plug Pliers

Feature

Capacity of 3/4-inch to 2-1/2-inch
Four position pivot design provides greater concentricity
Replaceable urethane padded jaws protect work piece from marking or scratching
Plastisol grips for added comfort
9-1/2-inch Overall length

Description

Stanley J253G Proto Soft Jaw Cannon Plug Pliers - 9-1/2-inch Capacity of 3/4-inch to 2-1/2-inch. Four position pivot design provides greater concentricity. Replaceable urethane padded jaws protect work piece from marking or scratching Plastisol grips for added comfort. 9-1/2-inch Overall length.

5. Tsunoda, PL-150SC-S PLA-iers, Replaceable Resin Jaw Pliers w/built-in-spring (6-inch)

Feature

Cutting Capacity (AWG) : Soft Iron 12
Jaw Capacity: 0.24-1.10 inch
2 positions slip joint pliers
Replaceable plastic pads prevent scratching on work pieces.
Built-in-spring is loaded

Description

PLA-iers series products have replaceable plastic pad jaw and they prevent marring or scratching on works pieces. The pair of assymetric pads hold targets tightly with 3 points. Recommendable for works such as holding plated metal parts or plastic goods. No screws required to replace resin pads. Just pushing them out with thin stick like a screwdriver and insert new pads by hands. The built-in-spring is helpful for continuous work. A hole on the end of handle for safety straps is loaded.

6. Non Scratch Pliers - Tools - Tamiya

Feature

Non scratch pliers
Handy tool to have at home
Colour: Multi-coloured
Size: One size

Description

This is a pair of the Tamiya Non-Scratch Pliers. FEATURES: Steel construction with plastic grips embedded in jaws that prevents clamped object from being damaged Ideal for flywheels and other R/C car assembly and maintenance Eight-step adjustment with spring loaded jaw Maximum grip width 1.8" (46mm) Blue rubber grip handles YOU WILL RECEIVE: One pair of Tamiya Non-Scratch Pliers. SPECIFICATIONS: Overall Length of Pliers: 8" (203mm) Width of Jaws: 0.39" (10mm) jxs 10/18/04 ir/jxs &

7. HDX 10 in. Soft Jaw Pliers

Feature

Tool can be used on basin and sink lock nuts, trap nuts and toilet spuds 1-1/4 in., 1-1/2 in. and 2
Handles have soft rubber grip covers for comfort
Pliers jaws have plastic jaw covers for fashion plumbing applications
Pliers are adjustable to accommodate small and large fittings

Description

This 10 in. adjustable water pump pliers is equipped with soft jaw caps for use on fashion plumbing fixtures. The plastic caps keep the jaws from marring the surface. The pliers have rubber coated handles for comfort and added grip.

8. IPS Soft touch the water pump pliers (Japan Import)

Description

Grab a solid object that will not "hurt" firmly with a resin gripper Maximum opening width: 46 mm Adjustment: 8 steps Weight : 335 g

9. KNIPEX Tools 98 62 02, Flat Nose Plastic Pliers 1000V Insulated

Feature

Constructed of fiberglass reinforced plastic
Fully insulated to reduce risk of short circuit
Handles have a soft plastic sone for better grip
Excellent for use in chemically aggressive environments
All insulated tools meet the requirements of ASTM F1505

Description

These high-quality flat nose pliers are made from fiberglass-reinforced plastic, which is fully insulated and provides protection against bridging for working on live parts up to AC 1000V and DC 1500V. These solid pliers do not act on magnetic fields and are fully spark-free. They are ideal for meter assembly and meter blocking. In addition, they are excellent for use in chemically aggressive environments. These pliers meet the following standards: IEC 60900, DIN EN 60900 and ASTM F1505.

10. LIHAO Snaps and Snap Pliers Set, 375 Sets T5 Plastic Buttons for Sewing and Crafting

Feature

Include everything you need to get started. Great kit for both starter and professional tailor
Comes with 375 sets of Size 20 (T5) plastic snap buttons in 24 different colors
Pliers can work with 16, 20 and 24 snap, which is also displayed as T3, T5, and T8. You'll love the ease and convenience of these pliers. It only takes a few seconds to install a snap
Snaps aren't just for clothing or diapers. Use them to make wallets, add them to towels to keep them from falling off the rack, make no-sew pacifier clip ribbon holders, put them on mittens or socks to keep them from disappearing, create cinch belts, etc -- the possibilities are truly endless
Back by LIHAO hassle free lifetime warranty

Description

About Snaps:

Shape: round
Material: plastic
Button size: 1.2 cm

About Snap Pliers Set:

Pliers can be used with T3, T5, T8 Buttons
Awl to poke holes in your fabric for easier snap placement


How to Install plastic snaps with the press pliers

1. For each snap, you wil need two caps, one socket and one stud.
2. Make sure your pliers match the size of the snaps you plan to fasten.
3. Choose your spot to install the snap and stick your awl into your fabric to create a small hole.
4. Insert one cap and one socket into the pliers and line up with the hole you made with your awl. Repeat this step with one cap and one stud where you plan to install the other side of your snap.
5. Squeeze together a cap+socket AND THEN a cap+stud.
6. Once you have each side of your snap installed, the socket and stud will click together! If either side feels loose, simply set the one side of the snap in the pliers again and squeeze.


Package Includes:

1 x 360 Sets of T5 Snap Buttons(+ 15 Set Black Snaps)
1 x Snap Press Pliers Set
1 x 12 Sewing Clips

Conclusion

All above are our suggestions for pliers plastic. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using pliers plastic with us by comment in this post. Thank you!