Looking for a laser marking machine for metal? Have a look at this 2019 guide!

Shopping for the best laser marking machine for metal is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy laser marking machine for metal. Don’t worry any more! We spend many hours to review and compare laser marking machine for metal to make the short list for you. Let’s check which product is suitable with you.

Best laser marking machine for metal

Product Features Editor's score Go to site
Triumph Fiber Laser Marking Machine 30w For Permanent Metal Parts Marking and Engraving with rotary attachment Triumph Fiber Laser Marking Machine 30w For Permanent Metal Parts Marking and Engraving with rotary attachment
Go to amazon.com
DIY CNC Laser Engraver Kits 4050 GRBL Control Wood Carving Engraving Machine (Working Area 40x50cm, 2 Axis (2500MW) DIY CNC Laser Engraver Kits 4050 GRBL Control Wood Carving Engraving Machine (Working Area 40x50cm, 2 Axis (2500MW)
Go to amazon.com
Mini Laser Engraving Machine, 3000MW Laser Engraver Printer Desktop Laser Engraver Machine for DIY Logo Marking, Working Area 8x8CM with CE Certification Mini Laser Engraving Machine, 3000MW Laser Engraver Printer Desktop Laser Engraver Machine for DIY Logo Marking, Working Area 8x8CM with CE Certification
Go to amazon.com
15000MW DIY Laser Engraver Machine,15W Laser,Stainless Steel Engrave Marking Machine,Steel Carving CNC Router Machine,Advanced Toys 15000MW DIY Laser Engraver Machine,15W Laser,Stainless Steel Engrave Marking Machine,Steel Carving CNC Router Machine,Advanced Toys
Go to amazon.com
OMTech 40W Laser Engraver and Cutter, K40 Desktop Engraver with 8x12 Bed, CO2 Laser Engraving and Cutting Machine with Digital Controls Red Dot Pointer Wheels for DIY Woodwork and More, DF0812-40RW OMTech 40W Laser Engraver and Cutter, K40 Desktop Engraver with 8x12 Bed, CO2 Laser Engraving and Cutting Machine with Digital Controls Red Dot Pointer Wheels for DIY Woodwork and More, DF0812-40RW
Go to amazon.com
TFCFL 10W 1420 USB Desktop CNC Laser Engraver DIY Marking Machine for Metal Stone Wood Laser Carving MachinePortable Household Art Craft DIY Laser Engraver Printer TFCFL 10W 1420 USB Desktop CNC Laser Engraver DIY Marking Machine for Metal Stone Wood Laser Carving MachinePortable Household Art Craft DIY Laser Engraver Printer
Go to amazon.com
WaveTopSign 20W Fiber Laser Marking Machine 210x210mm Working Area for Marking Metal Stainless Steel(20W Raycus Laser Module) WaveTopSign 20W Fiber Laser Marking Machine 210x210mm Working Area for Marking Metal Stainless Steel(20W Raycus Laser Module)
Go to amazon.com
4YANG 15W Mini Laser Engraver, High Speed USB DIY Engraving Machine with High Power Pulsed Laser for Metal Steel Iron Stone Wood Marking Used As Logo Printer 4YANG 15W Mini Laser Engraver, High Speed USB DIY Engraving Machine with High Power Pulsed Laser for Metal Steel Iron Stone Wood Marking Used As Logo Printer
Go to amazon.com
DIHORSE Fiber Laser Marking Machine 30W for Permanent Metal Parts Marking and Engraving, Working Area 300x300mm, with 50MM Rotary Attachment (MAX, 30W, 300x300MM) DIHORSE Fiber Laser Marking Machine 30W for Permanent Metal Parts Marking and Engraving, Working Area 300x300mm, with 50MM Rotary Attachment (MAX, 30W, 300x300MM)
Go to amazon.com
VEVOR 30W Fiber Laser Machine 150x150mm Fiber Laser Engraver with Laser Focusing Function Fiber Laser Marking Machine for Both Metal and Non-Metal VEVOR 30W Fiber Laser Machine 150x150mm Fiber Laser Engraver with Laser Focusing Function Fiber Laser Marking Machine for Both Metal and Non-Metal
Go to amazon.com
Related posts:

1. Triumph Fiber Laser Marking Machine 30w For Permanent Metal Parts Marking and Engraving with rotary attachment

Feature

MOPA structure laser source(better than Q-switched).Works on all metals and varous non-metal materials
With rotary attachment which you can work with for any cylinder shape material for engraving
Free shipping and deliver to your door directly.Engraving area 110x110mm or 210x210mm optional,
Free maintenance/Lifetime 100000 hours,good support from our service.
JCZ Laser software is installed and ready to work,compatible 64bits or 32 bits computer system, supporting PLT, BMP, DXF, JPG, TIF, AI, PNG, JPG, etc formats

Description

Video
software operation marking---https://youtu.be/x2Usb3RgGZI
Stainless steel black engraving---https://youtu.be/0-WIHZ9GgIs
Silver engraving and cutting---https://youtu.be/f1pPeXMLu9Q

User manual
https://drive.google.com/open?id=0B1RPb-RHDufBVVlJbWpXVVRXWWM

Feature:

High peak power and excellent beam quality.
Good touch interface and powerful control system.
Advanced digital high speed scanning galvanometer, small volume, quick speed, good stability.
Modular design, separate laser generator and lifter, more flexible, can marker on bigger area and complicated surface.
Be able to mark on aluminum, copper, gold and silver without the shadow and virtual open phenomenon.
Adopt special flying marking control system, with good performance and easy operation.

Parameter:

Laser Type:Fiber Lasers Wavelength:1064nm
Laser Pulse Frequency:20-80Khz
Beam Quality:<1.4M2
Peak Laser Power:30W
Engraving Speed:<9000MM/S
Engraving area:<110x110mm or 210x210mm
Engraving Depth: less than or equal to 0.3MM
Repetition Precision: 0.01MM Min.
Line Width: 0.02MM Min.
Character: 0.2MM
Cooling Mode:Air Cooling Graphic
Formats Supported:PLT. DST. AI. DXF. BMP.JPG.CAD. CDR. DWG
Power Source:AC 110V10%, 50/60Hz
Working Temperature: 10-35 C
Working Humidity:below 75%(No condensation)
Working Environment: Clean;free of dust
Gross Power: below1000W
Safety Protection Class:IP54
Laser Generator Safety Class:IV
Adjustable Height Direction(Upper surface): 550-1200MM
Adjustable Height Direction(Side):400-1500MM
Front And Back Direction Adjustable Distance:0-200MM Marking
Angles:Any Angles
Laser Module Life:>100000 hours
Warranty:One year

2. DIY CNC Laser Engraver Kits 4050 GRBL Control Wood Carving Engraving Machine (Working Area 40x50cm, 2 Axis (2500MW)

Feature

This DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions. 5500MW can cut 3MM wood
Can be processed material Wood, plastic, paper, bamboo, horns, a little leather (wallet), plastic phone shell, rubber chapter, photosensitive chapter, sponge paper
It only need you to connect it to the computer,then you can print any pictures your like with your own creativity.
Specifications: Construction: Body Aluminum + Acrylic Voltage:12V 5A)110~240V Engraving area: 40x50cm Laser power: 300MW ,500MW,2500MW,5500MW optional
Package includes: 1pc Laser Engraver DIY Kit Parts 1pc Power supply 1pc USB cable 1pc Safety glasses

Description


Applicable Product and Non Applicable Scale:
This laser engraving machine can not carve the following materials:
Metal (regardless of thickness), stone, ceramic, jade jewelry, reflective material, colorless transparent material, soft material (7w and 10w can engrave on metal)


This laser engraving machine can carve the following materials:
Wood, plastic, paper, bamboo, horns, a little leather (wallet), plastic phone shell, rubber chapter, photosensitive chapter, sponge paper


Specifications:
Construction: Body Aluminum + Acrylic
Voltage:110~240V
Engraving area: 40x50cm
Laser power: 300MW ,500MW,2500MW,5500MW optional
Carving materials: Wood, plastics, paper, bamboo, some cortex (purse), cell phone plastic shell, rubber stamp,photosensitive chapter, sponges , 5500MW can cut 3MM wood .
Weight: 5kg
Package includes:
1pc Laser Engraver DIY Kit Parts
1pc Power supply
1pc USB cable
1pc Safety glasses
Notice:
The machine for a full set of spare parts, shall be installed by the buyers.
We suggest cnc-based buyers to buy,
this machine is not industrial grade level.

3. Mini Laser Engraving Machine, 3000MW Laser Engraver Printer Desktop Laser Engraver Machine for DIY Logo Marking, Working Area 8x8CM with CE Certification

Feature

Precise Positioning- Laser engraver working area: 80*80 mm; Positioning Accuracy: 0.01mm; Engraving range: 8 * 8 CM; Engraving height: No limit.
A Variety Of Functions- 3000mw DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions.
Portable And Mini Design- USB laser engraver with new usb interface, which is ideal for home use DIY carving handicraft. Perfect for Decoration Engraving or Customize your small lovely belongings, it will sure meet your satisfaction.
With CE Certificatio- Strength Plastic body, fine workmanship, Super multi positioning holes make carried objects effective and stable, Don't be offset when Engraving. Greater Power, Faster Speed, More Accurate Precision.
Use On Wide Variety Of Materials - Wood, Plastic, Bamboo, Rubber, Leather, Greeting Card, Paper and other Flammable Materials. Please note it can't carve any kind of metal or glass.

Description

Specification:
Working area : 8cm * 8cm(3.15inch * 3.15inch)
Size: 15.2 x 16.6 x 14.3 cm / 5" * 6.5" * 5.6"
Machine materialABS plastic + Aluminium alloy
Laser power : 3000mw
Laser Wavelength: 450nm
Voltage: AC 110-220V
Output Voltage: 12V/2A
Positioning Accuracy: 0.01mm(0.04inch)
Software: Self-developed software, easy to operate
the software is easy to use, free upgrades. software support windows-97/03/7/8/10 Windows Vista / XPUnixLinux are not supported
Picture format: JPG / GIF / BMP / DIB / ICO / CUR /PNG

DIY desktop blue laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions. Perfect for Decoration Engraving or Customize your small lovely belongings.

This laser engraving machine is not available for the following materials:
Metals (regardless of thickness), stone, ceramics, jewelery, reflective material, colorless, transparent materials, soft materials.

Note:
You can use other drawing software to edit picture and then engrave by the engraving machine.
Laser head is a consumable, please don't use it over time. It is suggested to control engraving time to protect the machine.
Laser is harmful to eyes. Please don't look into the laser.
Please note it can't carve any kind of metal or glass.

Tsemy can guarantee the quality of this products.Please buy it with your confidence.If for any reason you are not completely satisfied with your purchase or the product is damaged in transit, broken, please contact us promptly.

Package included
1 * Laser engraver
1 * USB disk
1 * Screw driver
4 * Screws
4 * Screw caps
1 * Power cord
1 * USB cable
2 * Wooden board
1 * User Manual(English)

4. 15000MW DIY Laser Engraver Machine,15W Laser,Stainless Steel Engrave Marking Machine,Steel Carving CNC Router Machine,Advanced Toys

Feature

Nanosecond timing of serial data transmission substantially without delay
Power adjustable
High power pulsed laser,
Lifts fast focusing
Targeting low light gray print!

Description

Specification,
1. Interface: USB
2, Power: 12v4A
3, laser power: impulse=15W, average 6-7w output.
4, the appearance size: 280cm*320mm*23mm
5, Engraving area: 140mm*200mm
6, Weight: 3.6KG
7, package size: 380*360*230mm
8,laser size: 95mm*45mm(L W)
9, laser focus: No
10, can be carved material: stainless steel, wood,
bamboo, leather, plastic, etc.
keep laser working distance is 16mm and adjust the power level with 16-20ms this is for metal engrave

5. OMTech 40W Laser Engraver and Cutter, K40 Desktop Engraver with 8x12 Bed, CO2 Laser Engraving and Cutting Machine with Digital Controls Red Dot Pointer Wheels for DIY Woodwork and More, DF0812-40RW

Feature

Working area: 12" x 8". Comes with a premium focal lens and a 40W CO2 laser tube. Works with most graphics design programs.
Quality CNC machined parts for durability. German built bearing Y axis guide rails. This machine can be updated to 50W as long as you change the laser tube and the power supply.
Capable to work on most organics or NON-metal materials such as bamboo, leather, wood, acrylic, plastics, glass, cloth, paper etc. Engraving speed: 0-400 mm/s. Cutting speed: 0-50 mm/s.
Software: Shenzhouyi (included). Also compatible with CorelDraw (NOT included). Comes with effective ventilation fan for fumes and smoke extraction.
Windows 10, 8, 7 (64 or 32 bit), XP, 2000 compatible (NOT compatible with iOS system). USB connectivity makes it easy to observe from your computer.

Description

K40-3020 Laser:
1. This engraver is compatible with CorelDraw , but CorelDraw is NOT included.
Compatible with corelaser (which requires CorelDraw) and laser DRW (compatible with most graphic design programs)
2. Make sure the JPG pictures are of high resolution if you're to use JPG pictures, otherwise the patterns to be engraved might be vague.
3. Use vector grams done by CorelDraw to engrave for ultimate results.
4. The quality of patterns to be engraved depends on a lot of factors: engraving speed, laser power, current amperage etc., all of which should be set correctly according to the manual provided.
5. Rotary device is NOT included, and cannot be added to this engraver.
6. This 40W engraver can be updated to 50W as long as you change the laser tube and the power supply.

Package includes:
1 CO2 Laser Engraver
1 Air Exhaust Fan
1 Venting Tube
1 Water Pump
1 USB Key & USB Cable
1 Software
1 Manual

Specifications:
Suitable materials: wood, stone, glass, leather, crystal, paper, film, rubber, bamboo, and many other non-metal materials (This machine will not work on any metals. It can only mark on the anodized coating / non-metal surfaces).
Engraving area: 12" x 8" / 300 x 200mm
Laser power: CO2 Glass 40W rated an estimated 1,000-1,300 hours
Compatible operating systems: Windows 2000, XP, 7, 10 and 8(32/64 bit); NOT compatible with iOS system
Software interface: Shenzhouyi / Laser Draw Software / Core Draw Software
Resolution: Up to 1000 dpi

Motor type: Stepper Motor
Power supply: AC 110V
Working temperature: 40 - 104F
Working humidity: 5% - 95% without condensed steam

Machine dimensions: 31.5" x 19.5" x 10"
Product Weight: 67 lbs
Package Weight: 80 lbs

6. TFCFL 10W 1420 USB Desktop CNC Laser Engraver DIY Marking Machine for Metal Stone Wood Laser Carving MachinePortable Household Art Craft DIY Laser Engraver Printer

Feature

This is the most powerful DIY Laser engraver available. It comes with 10W Laser.Support operating system: Windows 7/8/10.Minimal assembly required. Just a few screws away from connecting to your laptop!
Plug and play, Easy to use. Connect the USB cable to the board, install the software and start engraving.It can engrave metal and stone, cut wood, foam and other materials easily.
This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.
Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm, nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print.
Interface: USB.Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages.Software included in the package.Note:Please do not refresh the firmware, the store is not responsible for the problem after refreshing.

Description

Note:Please do not refresh the firmware, the store is not responsible for the problem after refreshing.

Specifications:
Body material: Aluminum + Acrylic
Drive system: Stepper motor
Stepper precision: 0.00625mm
Engraving area: 14 x 20cm / 5.51" x 7.87"
Engraving speed: 0.02 to 0.2 sec / pixel
Laser power: pulse 10w (100ns Duty 50%) Average 6-6.5W
Marking materials: Stainless steel, iron, anodized aluminum, ceramics, stone.
Engraving materials: Wood, bamboo, leather, plastics, etc.
Height restrictions: no
Support operating system: Windows 7/8/10
Plug:US PLUG

Power supply Input: AC 100V-240V, 50/60Hz
Power supply Output: DC 12V 4A
Software:Benbox
Weight: 4KG
Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages.
Package size: 65 * 35 * 25cm.
Super-reduced instruction, 1 byte of instruction accounted for more than 40%.
Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time.

Features:
This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.
There is no visible depth for the mark, can only leave a permanent marking.
Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself. Can not cut plywood.
Can not mark on glass or similar surface.
This machine can mark only on the completely flat surface since the focal length is fixed.

Package includes:
1pc 10W Laser Engraver
1pc Power supply
1pc USB cable
1pc Safety glasses
1pc Manual Lifting Platform 10x10cm 4"x4" (Lab Jack)

7. WaveTopSign 20W Fiber Laser Marking Machine 210x210mm Working Area for Marking Metal Stainless Steel(20W Raycus Laser Module)

Feature

Great Performance: Identical marking quality with high speed.(up to 0.002mm accuracy and 7000mm/s speed)
Long Lifetime & Low Consumption: Adopt advanced fiber generator, the life time could up to 100,000 hours.Optical fiber laser environmental friendly and energy-saving
Raycus Laser Module:The 10-100W Q-Switched Pulse Fiber Laser Series developed by Raycus is the industrial marking and micromachining laser developed by Raycus. This series pulse laser has high peak power, high single-pulse energy and optional spot diameter and can be widely applied in the fields, such as marking, precision processing, graphic engraving of non-metal, gold, silver, copper and aluminum with altitude stress resistance, stainless materials without altitude stress resistance.
High peak power and excellent beam quality. Good touch interface and powerful control system.
Service:WaveTopSign has been working in the field of industrial cutting and laser for 7 years. We have very deep technical conditions. For each of our products, we can provide sufficient technical and service support. Any questions can be communicated with us through station letter or Q&A.And also you can google WaveTopSign to know more about our company.

Description

Product Features

Model : Raycus 20W(Note:In the product image list, the area marked by the blue border in the laser module parameter table is the detailed parameter of the core laser module used by the product.)

Laser wavelength : 10644nm

Positiong system : Red Light

Standrad marking range : 210x210 mm

Laser repetition rate : 100KHz

Beam quality : m2<1.5

Engraving depth : 1.2mm

Repeat precision : 0.001

Cooling : air cooling

Power demand : 200V/50Hz/10A

Power consumption : 500W

Net weight : 35kg

Important Notice:

If you are not sure whether the machine can meet your needs,please tell us the material you want to mark,it will better if you can provide a sample pic,we will use the machine to mark the sample according to your requirement and send you pic or video,then you can know whether you ordered the right machine,it"s good for both of us,save time and money,win-win cooperation.

Attention

All the products shipping from China might cause tarifs. Please know well about your country's import laws. All the products

WaveTopSignselling default FOB trading terms, the buyers will- take his responsibility on all kinds of tax in their country. If you havespecial requests about declaration, please leave messages to us when you make an order.2. Shipping from local country (Germany/USA/Russia) has no import tarifs required.

8. 4YANG 15W Mini Laser Engraver, High Speed USB DIY Engraving Machine with High Power Pulsed Laser for Metal Steel Iron Stone Wood Marking Used As Logo Printer

Feature

Latest Engraver: With adjustable power fast focus, The nanosecond timing of serial data transmission is basically no delay, Also the print feature for light gray is greatly improved too, indeed an engraver made of technology.
A must to have: Offer a great way to repeat processes and do things that no hand tool ever allowed you to do, a must to have mini laser engraving machine DIY Handyman or an artist , perfect for artist, hobbyists and craft makers.
Easy To UseAll you need to do is to connect the USB cable to the board, install the software and start engraving. Just a few screws away from connecting to your laptop! Also the manual will be included.
Adjustable PowerSoftware adjustable laser power, low light positioning, positioning freedom, grayscale, shortest path algorithm, helps allow you to engrave things at the speed and strength you want.
Widely Applied: Can be applied on such materials as wood, plastic, acrylic, metal, stainless steel, anodized engraved aluminum, stone, bamboo, leather, paper, plastic, some reflective, transparent material and so on.

Description

Latest Engraver With adjustable power fast focus, The nanosecond timing of serial data transmission is basically no delay, Also the print feature for light gray is greatly improved too, indeed an engraver made of technology.

Working Video:

https://www.youtube.com/watch?v=mUDa-qJe-y0&t=431s

Instructions Link:

https://goo.gl/FusZAf

Specifications:

Construction: Mobile gantry, Body Aluminum + Acrylic

Drive system: Stepper motor

Stepper precision: 0.00625mm

Engraving area: 14 x 20cm

Engraving speed: 0.02 to 0.2 sec / pixel

Laser power: Pulse 15W, average 8W

Focal: 16mm--18mm, adjustable by Manual Lifting Platform

Carving materials: stainless steel, anodized aluminum, stone, wood, bamboo, leather, plastics, etc.

Power supply: external adapter, DC 12V 4A, input AC 100V-240V, 47Hz-66Hz

Support operating system: Windows 7/8/10

Package Weight: 4.3KG

Package size: 38 * 35 * 21cm

laser size: 95mm*45mm(L W)

laser focus: No

keep laser working distance is 16mm and adjust the power level with 16-20ms this is for metal engrave

Package Includes: ( DIY Kit, Need To Assemble By Yourself.)

1 x 15W Laser Engraver

1 x Power Adapter 12V 4A

1 x Laser Protection Glasses

1 x Test Steel Sheet

1 x Manual Lifting Platform 10x10cm 4"x4" (Lab Jack)

1 x USB Cable

1 x Focusing Column

Note:

1. Please wear laser goggles during using and avoid touching the laser directly with your eyes and skin!

2. Keep laser working distance is 16mm and adjust the power level with 16-20ms this is for metal engrave.

3 Cylindrical surface metal cannot be engraved, reflective metal cannot be engraved, and gold, silver, aluminum cannot be engraved too.

4. Burning time should not exceed one hour; do not adjust the power too small.

5. Connect the USB cable

9. DIHORSE Fiber Laser Marking Machine 30W for Permanent Metal Parts Marking and Engraving, Working Area 300x300mm, with 50MM Rotary Attachment (MAX, 30W, 300x300MM)

Feature

Free Shipping: STOCK in USA. Free shipping to your address
Great Performance: Identical marking quality with high speed.(up to 0.002mm accuracy and 7000mm/s speed). Adopt advanced fiber generator, the life time could up to 100,000 hours.Optical fiber laser environmental friendly and energy-saving
50MM Rotary Attachment: Professional for round material marking, ideal for marking rings, pens,etc.
Laser Engraving Machine Application: Fits for all metal and varies non-metal materials
Guarantee: 1-year warranty for whole machine; lifetime online technical support. If you have any question just contact us via e-mail, we will provide you with the best after-sale service

Description


Technical Parameters:

Laser Power: 30W
Power Supply Requirements: 110V
Working Area: 11.8x11.8inch (300x300MM)
Laser Wavelength: 1064nm
Marking Depth: 0.4mm
Marking Speed: 0-7000mm/s
Marking Lines: 1-10 lines
Minimum Character: 0.15mm
Response Time: 0.5ms
Repeatability Accuracy: 0.002mm
Resolution Ratio: 0.01mm
Min.line with: 0.01mm
Certificate: With CE & FDA Certificate
Operation System: Microsoft Windows 7/10
Control Software: EZCAD Control Software
Marking Content: Text, pattern, date, bar code, etc.
Graphic Format Supported: BMP, JPG, TGA, AI,DXF, PNG, TIF, DXF, DST, etc.
Unit Power: 1.2KW
Beam Diameter: <30um
Cooling Mode: Air Cooling
Frequency of pulse: 20-100 KHz
Laser Module Life: >100000 hours
Operation Temperature: 41-104 (5-40)
Package Weight: 304 pounds
Package Dimensions(L*W*H): 34 x 29 x 46 inches

Packing list:

1 X 20W Fiber Laser Machine
1 X 50MM Axis Rotary
4 X Replaceable switch
1 X USB flash disk
1 X Power cable
1 X Pedal
1 X Ruler

Please contact us for special work need or configuration details.

Notice:

1.Free return only with non-artificial quality problem within 10 days after you receiving the machine.
2. Whole machine warranty is 1 year starting from production time. Within one year, any fault caused by non-artificial reason we should maintain it freely.
3. During warranty period, the seller offers free repair or spare parts, and the buyer should afford round-trip courier charges.
4. Out of warranty period, the buyer should afford round-trip courier charges and spare parts fees.

10. VEVOR 30W Fiber Laser Machine 150x150mm Fiber Laser Engraver with Laser Focusing Function Fiber Laser Marking Machine for Both Metal and Non-Metal

Feature

STRONG COMPATIBILITY- Compatible with windows XP, 7, 8, 10 (Support 32/64 bit) and most of the format files.
AUTOFOCUS FUNCTION- This machine features laser focusing function, for automatically focus by identifying the thickness of the material.
SCANNING SYSTEM- The powerful galvanometer system is stable and greatly enhances the marking speed.
REFINED FITTINGS- Equipped with lifting wheel for height adjustment and 3 switch for dedicated control.
WIDELY USED- Capable to mark on varieties of metals and non-metallic materials, which is suitable for many industries.

Description

30W Portable Fiber Laser Marking Machine 150x150 mm Fiber Laser Engraver With Laser Focusing Function

Introduction:

The 30W portable fiber laser machine can mark on both metal and non-metal. Sturdy construction, high efficiency, durable and reliable. It is widely used for marking jewellery, keyboards of cell phone, auto parts, electronic components, electronic appliance, communication apparatus, sanitary wares, buckles, kitchenware, sanitary equipment's, hardware tools, knife, glasses, clock, cooker, stainless steel products etc.

Technical Parameters:

Product: Fiber laser engraver

Power: 30 W

Voltage: 110 V, 60 Hz

Marking size: 150x150 mm (6x6 inch)

Laser wavelength: 1064nm

Laser frequency: 20-80 KHz

Marking depth: <1 mm

Marking speed: 8000 mm/s

Minimum line width: 0.01 mm

Repeatability: +/-0.0001 mm

Beam quality: <1.6

Life: 100000 h

Compatible Software: Auto-Cad, CorelDraw, Photoshop

Computer system: Windows XP/7/8/10 (Support 32 bit / 64 bit)

File format: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT, etc

Feature:

1. Can be compatible with windows XP, 7, 8, 10 (Support 32 bit / 64 bit. NOT compatible with iOS system). The marking software is compatible with CORELDRAW, AUTOCAD, PHOTOSHOP and other format files; support PLT, PCX, DXF, BMP, etc, can use SHX, TTF font directly; also support automatic coding, marking serial number, production date, bar code, QR code, etc.

2. Focus can be automatically performed. As long as the thickness of the material to be marked is entered in the software, the machine can automatically focus.

Package List:

1 x Fiber Laser Machine

1 x Power Cable

1 x Foot Switch

1 x USB Cable

1 x Ground Wire

1 x Software CDv

Conclusion

All above are our suggestions for laser marking machine for metal. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using laser marking machine for metal with us by comment in this post. Thank you!

You may also like...