How to find the best subwoofer amp jl audio for 2019?

When you want to find subwoofer amp jl audio, you may need to consider between many choices. Finding the best subwoofer amp jl audio is not an easy task. In this post, we create a very short list about top 10 the best subwoofer amp jl audio for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 subwoofer amp jl audio:

Best subwoofer amp jl audio

Product	Features	Editor's score	Go to site
	JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier		Go to amazon.com
	JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box		Go to amazon.com
	JL Audio RD-900/5 5-Channel 900 Watts RMS RD Series Class D Amplifier		Go to amazon.com
	10W6v3-D4 - JL Audio 10" 600W Dual 4-Ohm Car Subwoofer		Go to amazon.com
	XD600/1 - JL Audio 600 Watt Class D Monoblock Subwoofer Amplifier		Go to amazon.com
	JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier		Go to amazon.com
	JL Audio Slash Series 1200/1v3 Mono subwoofer Car Amplifier, 1,200 watts RMSx1		Go to amazon.com
	JL Audio 12TW3-D4 12" 400W Dual 4 Ohm Thin-Line Component Car Subwoofer		Go to amazon.com
	JL Audio XD600/1v2 Mono subwoofer amplifier - 600 watts RMS x 1 at 2 ohms		Go to amazon.com
	JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3		Go to amazon.com

Related posts:

1. JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier

Feature

JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohms
Unregulated PWM switching type power supply
Variable Bass Boost (0 to +12 dB bass boost centered at 45 Hz)
Soft start turn-on prevent clicking and popping when system turns on
Dimensions: 11"L x 7-3/4"W x 2"H

Description

JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier OPEN BOX

2. JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box

Feature

CP212-W0V3 - JL Audio 12" 12W0V3-4 Loaded Ported Enclosure with Gray Carpet Finish
Power Handling: Peak: 600 watts | RMS: 300 watts
Mineral-filled, polypropylene cone woofer for excellent durability
Large roll surround for generous amounts of excursion
Enclosure Dimensions: 15-3/4"TD x 20-5/16"BD x 31-3/8"W x 15-3/16"H

Description

These potent slot-ported MDF-enclosed subwoofer systems fit a wide variety of vehicles and feature JL Audio's new 12" W0v3 subwoofer drivers. Designed for forward, read or down-firing installation. Loaded, wired, ready to install. Finished in dark gray carpet, five-way binding post connectors. Embroidered JL Audio logo above woofer(s), embroidered "Slot-Ported BassWedge" logo on port mouth. 2 ohm final impedance

3. JL Audio RD-900/5 5-Channel 900 Watts RMS RD Series Class D Amplifier

Feature

JL Audio RD-Series RD900/5 | Class-D 5-Channel Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 500 watts x 1 chan. | 1 ohm: ------------N/A------------ | Total power output: 1800 watts
CEA-2006 Compliant Amplifier | NexDTM Technology delivers outstanding sound quality, efficiency and reliability | LED clipping indicators | Pulse Width Modulated MOSFET power supply | LED power (green) and protect (red) indicators
Soft start turn-on | Mono channel operation | Bridging switch for each channel pair | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry (thermal, overload, and speaker short protection) | Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic Distortion (THD): <1% | Variable low-pass filter: 50 - 500 Hz, 12 dB/octave | Variable high-pass filter: 50 - 500 Hz, 12 dB/octave
Low-Pass Slope (dB/octave): 12 dB/octave | Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H

Description

JL AUDIO RD900/5 5-CHANNEL 900W RMS COMPONENT SPEAKERS SUBWOOFERS AMPLIFIER NEW

4. 10W6v3-D4 - JL Audio 10" 600W Dual 4-Ohm Car Subwoofer

Feature

Small Sealed Enclosure Volume Requirements
Very Long Linear Excursion Capability: 0.74 In / 18.8 mm, One-Way
High Power Handling
DMA-Optimized Motor Designs
Mounting Depth: 6.89"

5. XD600/1 - JL Audio 600 Watt Class D Monoblock Subwoofer Amplifier

Feature

Monoblock Subwoofer Amplifier
Differential-balanced with RCA jack inputs
State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
Buffered pass-through type
24 dB/octave Butterworth @ 30 Hz, defeatable

Description

RMS Power Rating (14.4V): 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. RMS Power Rating (12.5V): 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. Unregulated MOSFET switching type power supply NexD Ultra-High Speed Class D topology Wired JL Audio HD-RLC remote level control sold separately LED power (green) and protect (red/yellow) indicators State-of-the-art microelectronic components Mono channel operation Advanced Thermal Rollback System completely eliminates annoying thermal shut-down events Studio-grade signal processing with fully variable crossover filters Extruded aluminum alloy system setting security cover Total amplifier efficiencies exceeding 80% Noise-killing, highly flexible differential-balanced inputs Preamp RCA outputs to daisy chain multiple amps Defeatable low-pass and infrasonic crossover filters Dual speaker terminals simplify speaker installation 3-Way System Protection circuitry (thermal, overload, and speaker short protection) Heavy duty compact unitary cast alloy heat sink for extreme heat dissipation Silver-plated RCA level inputs Silver-plated screw terminals Input sensitivity: Level: 100mV-4V Variable low-pass filter (50-500 Hz, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley) Infrasonic Filter (30 Hz, 24dB/octave Butterworth) Damping factor: >1,000 @ 4 ohms / 50Hz, >500 @ 2 ohms / 50Hz Frequency response: 7-500 Hz Dimensions: 8-1/2"L x 7-1/16"W x 2-1/16"H RMS Power @ 4 ohms 400 watts x 1 channel RMS Power @ 2 ohms 600 watts x 1 channel RMS Power @ 1 ohm Not Stable Total RMS Power Output 600 watts Maximum Input Gauge Size 4 AWG Minimum Impedance Unbridged 2 ohms THD at Rated RMS Power 1.0% Preamp Outputs 1 pair Built-in Crossover Low-pass (LP) Low-Pass Crossover Frequency 50 - 500 Hz Subsonic Filter 30 Hz Signal-to-Noise Ratio 87 dB Channel Separation 67 dB JL Audio HD-RLC Fuse Rating 50A x 1

6. JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier

Feature

JL Audio RD-Series RD1000/1 | Class-D Monoblock Amplifier | RMS Power Rating: 4 ohms: 500 watts x 1 chan. | 2 ohms: 1000 watts x 1 chan. Total power output: 2000 watts | CEA-2006 Compliant Amplifier
Differential-Balanced Inputs | Speaker-level (high-level) inputs: JL Audio XD-CLRAIC2-SW Required, sold separately | NexDTM Technology delivers outstanding sound quality, efficiency and reliability | LED clipping indicators | Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators | Soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic Distortion (THD): <1% | Variable low-pass filter: 50 - 500 Hz, 12 dB/octave | Low-Pass Slope (dB/octave): 12 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H

Description

JL AUDIO RD1000/1 MONOBLOCK 1000 WATTS RMS SUBWOOFERS SPEAKERS BASS CAR AMPLIFIER NEW

7. JL Audio Slash Series 1200/1v3 Mono subwoofer Car Amplifier, 1,200 watts RMSx1

Feature

mono subwoofer amplifier
1,200 watts RMS x 1 at 1.5 to 4 ohms
4-gauge power and ground leads and a 100-amp fuse recommended (Wiring and hardware not included with amplifier)
parametric EQ bass boost (0-15 dB at 20-80 Hz)
Class-D amplifier design

Description

1. mono subwoofer amplifier 2. 1,200 watts RMS x 1 at 1.5 to 4 ohms 3. Regulated, Intelligent Power Supply system 4. differential-balanced inputs 5. variable low-pass filter (40-200 Hz, 12 or 24 dB/octave) 6. parametric EQ bass boost (0-15 dB at 20-80 Hz) 7. variable infrasonic filter (15-60 Hz, 24 dB/octave) 8. optional wired remote bass boost 9. Class-D amplifier design 10. MOSFET power and output stages 11. preamp and speaker-level inputs (speaker-level input requires an optional adapter) 12. preamp outputs 13. 4-gauge power and ground leads and a 100-amp fuse recommended - wiring and hardware not included with amplifier 14. no onboard fuses - when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended 15. 19-3/4"W x 2-7/16"H x 9-5/16"D

8. JL Audio 12TW3-D4 12" 400W Dual 4 Ohm Thin-Line Component Car Subwoofer

Feature

12TW3-D4 - JL Audio 12" Dual 4-Ohm W3 Thin-Line Series Subwoofer
Power Handling: Peak: 800 watts RMS: 100-400 watts
Mica-filled polypropylene cone
Rubber Surround
Top-mount depth: 3-1/2"

9. JL Audio XD600/1v2 Mono subwoofer amplifier - 600 watts RMS x 1 at 2 ohms

Feature

RMS Power Rating @14.4V: 4 ohms: 400 watts x 1 chan. | 3 ohms: 500 watts x 1 chan. | 2 ohms: 600 watts x 1 chan
RMS Power Rating @12.5V: 4 ohms: 300 watts x 1 chan. | 3 ohms: 400 watts x 1 chan. | 2 ohms: 500 watts x 1 chan.
NexDTM High Speed Switching Class D Technology | Wired HD-RLC remote level control available, sold separately | LED power (green), over-current (yellow) and protect (red) indicators
Selectable Low-Pass Filter Slope: 12 dB or 24 dB | Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline (not supplied)
Dimensions: 7.09"W x 8.52"L x 2.05"H

Description

JL AUDIO XD600/1V2 MONOBLOCK 600W RMS CLASS D SUBWOOFERS SPEAKERS AMPLIFIER NEW

10. JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3

Feature

10" Single 4 Ohm W3v3 Series Subwoofer
Peak: 600 watts | RMS: 300 watts
Impedance: Single 4 Ohm
Top Mount Depth: 5.93"
Cutout Diameter: 9.0625"

Description

# 10" 4-ohm subwoofer # mineral-filled polypropylene cone with nitrile-butylene rubber surround # power range: 100-500 watts RMS # peak power handling: 1,000 watts # frequency response: 25-250 Hz # sensitivity: 84.87 dB # top-mount depth: 5-7/8" # sealed box volume: 0.625 cubic feet # ported box volume: 1.125 cubic feet

Conclusion

By our suggestions above, we hope that you can found the best subwoofer amp jl audio for you. Please don't forget to share your experience by comment in this post. Thank you!