How to find the best heater fan for incubator for 2019?
When you want to find heater fan for incubator, you may need to consider between many choices. Finding the best heater fan for incubator is not an easy task. In this post, we create a very short list about top 10 the best heater fan for incubator for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 heater fan for incubator:
Best heater fan for incubator
1. AC Infinity AXIAL 1225, Quiet Muffin Fan, 115V 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Feature
Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set
Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright
Low Speed: Has a lower noise and airflow rating than high speed models
Dimensions: 120 x 120 x 25 mm | Airflow: 51 CFM | Noise: 30 dBA | Bearings: Dual Ball
Description
Product DescriptionThe heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan's metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty ConstructionThe fan's housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
ApplicationsThis low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
2. IncuKit XL for Cabinet Incubators (IncuStat Basic Thermostat, 1 x Fan/Heater Unit (125 Watts))
Feature
All-in-one thermostat, heater, fan control unitFor Mid-Size & Cabinet Incubators
Choose Basic or Advanced thermostat module
Digital electronic pre-set (99.5 F) thermostat
Option to use 1 or 2 heater and fan modules (125 watts or 250 watts)
Description
The IncuKit XL is an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor. Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your inubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices.3. Electrical Equipment & Supplies Other Electrical Equipment - 100W 12V 60x60mm PTC Fan Heater Constant Temperature Incubator - 1 X Fan Heater With Wire
Feature
Electrical Equipment & Supplies Other Electrical Equipment - Specifications: Size: 60*60*35mm(appr.)Mounting hole size:4mm
Heat Material: PTC Thermistor
Input voltage:12V DC
Electrical Equipment & Supplies Other Electrical Equipment - 100W 12V 60x60mm PTC Fan Heater Constant Temperature Incubator - 1 X Fan Heater With Wire
Description
Electrical Equipment & Supplies Other Electrical Equipment - 100W 12V 60x60mm PTC Fan Heater Constant Temperature Incubator - 1 X Fan Heater With Wire, Usage:, 1.This PTC part is used fSpecifications: Size: 60*60*35mm(appr.)
Mounting hole size:4mm
Heat Material: PTC Thermistor
Input voltage:12V DC
Power: 100W
Lead Wire: high temperature line
Heat Methods: heat radiation by air flow
Description:
- Safety, surface insulation.
- Heat up quickly, long service life.
- self-control temperature.
- small sound.
- PTC Insulated Ripple heating element are heating elements designed to heat up moving air.
- The large surface area of the aluminum fins ensures a homogeneous heat transfer adjusting the air volume flow.
Package Included:
1 X Fan Heater With Wire
Usage:
1.This PTC part is used for heating air or solid.
2.The PTC meterial has a characteristic that it is constant temperature on the surface.
Note: The power is reference value. the better the dissipation is, the bigger the power is. This model can be use without dissipation.
Application :
Main purposes: air heating, oven, shoe dry shoes, dryers, dehumidifiers, heaters, dryers and other confined space air convection heating
More details:
4. GGGarden 100W 12V 60x60mm DC PTC Fan Heater Constant Temperature Incubator
Feature
Specifications:Size: 60*60*35mm(appr.)
Mounting hole size:4mm
Heat Material: PTC Thermistor
Input voltage:12V DC
Description
Specifications:
Size: 60*60*35mm(appr.)
Mounting hole size:4mm
Heat Material: PTC Thermistor
Input voltage:12V DC
Power: 100W
Lead Wire: high temperature line
Heat Methods: heat radiation by air flow
Description:
- Safety, surface insulation.
- Heat up quickly, long service life.
- self-control temperature.
- small sound.
- PTC Insulated Ripple heating element are dynamic heating elements designed to heat up moving air.
- The large surface area of the aluminum fins ensures a homogeneous heat transfer adjusting the air volume flow.
Package Included:
1 X Fan Heater With Wire
Usage:
1.This PTC part is used for heating air or solid.
2.The PTC meterial has a characteristic that it is constant temperature on the surface.
Note:The power is reference value. the better the dissipation is, the bigger the power is. This model can be use without extra dissipation.
Application :
Main purposes: air heating, oven, shoe dry shoes, dryers, dehumidifiers, heaters, dryers and other confined space air convection heating
More details:
5. Inkbird ITC308S Freezer Temperature Controller Heating Cooling Plug Thermostat Pre Wired Digital 2 Stage Temp Control Outlet for Greenhouse Heater Cooler Incubator Reptile with Short Probe Sensor
Feature
F/C degree display; Easy to setup.The sensor can easily be replaced.
Maximum output load: 1100W (120V).
Alarm when over-temperature and sensor error.
Dual display window, be able to display measured temperature and set temperature at the same time.
Description
Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual
6. Electrical Equipment & Supplies - Other Electrical Equipment - 100W 12V 60x60mm DC PTC Fan Heater Constant Temperature Incubator
Feature
Package Includes: 1 X Fan Heater With Wire | Usage: | 1.This PTC part is used for heating air or solid. | 2.The PTC meterial has a characteristic that it is constant temperature on the surface.- Safety, surface insulation.
- Heat up quickly, long service life.
- self-control temperature.
- small sound.
Description
Specifications:Size: 60*60*35mm(appr.)
Mounting hole size:4mm
Heat Material: PTC Thermistor
Input voltage:12V DC
Power: 100W
Lead Wire: high temperature line
Heat Methods: heat radiation by air flow
Descriptions:
- Safety, surface insulation.
- Heat up quickly, long service life.
- self-control temperature.
- small sound.
- PTC Insulated Ripple heating element are dynamic heating elements designed to heat up moving air.
- The large surface area of the aluminum fins ensures a homogeneous heat transfer adjusting the air volume flow.
Package includes:
1 X Fan Heater With Wire
Usage:
1.This PTC part is used for heating air or solid.
2.The PTC meterial has a characteristic that it is constant temperature on the surface.
Notes: The power is reference value. the better the dissipation is, the bigger the power is. This model can be use without extra dissipation.
Applications:
Main purposes: air heating, oven, shoe dry shoes, dryers, dehumidifiers, heaters, dryers and other confined space air convection heating
7. Air Heater, Asixx Constant Temperature PTC Fan Car Air Heater Small Space Heating Incubator for Heater, Humidifier, Air Conditioning, etc(12V 150W)
Feature
With insulator on surface, safe to use, high reliabilityHeat up quickly, long service life. With mounting holes, easy to install
Adopts heat-resistant silicone wire as leading wire, red wire for
This system is energy saving, when the heater increases the environmental temperature, the power will reduce gradually within certain ranges
Applicable for heater, humidifier, air conditioning and other commonly used appliances
Description
Features:1. With insulator on surface, safe to use, high reliability.
2. Heat up quickly, long service life. With mounting holes, easy to install.
3. Adopts heat-resistant silicone wire as leading wire, red wire for "+" and black wire for "-".
4. This system is energy saving, when the heater increases the environmental temperature, the power will reduce gradually within certain ranges.
5. Applicable for heater, humidifier, air conditioning and other commonly used appliances.
Specifications:
Condition: 100% Brand New
Color: Black
Optional Type: #1 Rated Voltage: 12V Rated Power: 150W (15A)#2 Rated Voltage: 24V Rated Power: 150W (10A)
#3 Rated Voltage: 24V Rated Power: 250W (15A)
Mounting Hole Distance: approx. 87mm / 3.4"Mounting Hole Diameter: approx. 4mm / 0.16"
Product Size: approx. 60 x 60 x 42mm / 2.4" x 2.4" x 1.7"
Environment Temperature Range: -5~65Package Weight: approx. 160g
Quantity: 1pc
Package Included:
1 x PTC Heater
8. Bluedophin Electric Heaters Constant Temperature Industrial PTC Fan Heater 300W 220V AC Incubator Air Fan Heater Drying Device
Feature
Features: 1. maintain constant temperature 2. It enjoys a low cost and is more endurable and will not be damaged when used without water 3.Safe and secure 4.Automatic temperature control 5.Suitable for surface temperatures below 200 degree CelsiusAdvantage: 1.Safety, surface insulation. 2.Heat up quickly, long service life. 3.Self-control temperature 4.Small sound
Applications: Clothes dryer/Air conditioning units/equipment/General electric appliance/Air curtain machine/ Row and Mini Egg Incubator Heaters
Warning: Be careful when use it. This is a kind of Surface-Electrified PTC heater,do not touch it. When the heater is working, the aluminum parts are conductive.
Package included: 1x Fan heater
Description
Features:1. maintain constant temperature
2. It enjoys a low cost and is more endurable and will not be damaged when used without water
3.Safe and secure
4.Automatic temperature control
5.Suitable for surface temperatures below 200 degree Celsius
Advantage:
1.Safety, surface insulation.
2.Heat up quickly, long service life.
3.Self-control temperature
4.Small sound
Rated Power : 300w-500w
Rated Voltage: 220V AC
9. PTC Heater Element, Industrial Thermostatic Fan Heater 300W 220V Multipurpose Insulation Drying Device
Feature
PTC Insulative corrugated heater(PTC Air heater insulator,PTC Heater for warm air-conditioner) is a kind of large power Non-Surface-Electrified PTC heater with wind blowing.PTC element is fixed in aluminium tube and keep insulated with the aluminium tube.Give out heating quickly and constant,Longer life time,Keep stable power,Small sound.
PTC Insulated Ripple heating element are dynamic heating elements designed to heat up moving air.
The large surface area of the aluminum fins ensures a homogeneous heat transfer adjusting the air volume flow.
This system allows an automatic regulation of the heating power within certain ranges.
Description
Electric Heaters Constant Temperature Industrial PTC Fan Heater 300W 220V AC Incubator Air Fan Heater Drying DeviceEspecificaciones del calentador: Calentador de ondulacin PTC aislado (sin superficie)
Potencia nominal: 300W
Tensin nominal: 220V
Espacio de calentamiento: 3-5 m2.
Temperatura de calentamiento de espacio: 60 C
Especificaciones del ventilador: ventilador de 220V AC
Tamao: 125 * 80 * 104 mm (incluido el tamao de soporte)
Distancia del agujero de montaje: 92 * 52mm
Peso: 600g
Usos principales: calefaccin de aire, horno, zapato para secar el calzado, secador, deshumidificador, calentador, secador, casa de flores, incubacin de reproductores, etc.
Delivery time: 7-15 working days in most areas, 7-21 business days in remote areas
10. PTC Heaters Thermostatic Heating element 12 V (AC / DC) 200 W Multipurpose Multifunction Air Heater Insulation heater Incubator
Feature
Main purpose: heater / humidifier / auto / air conditioning / incubator / subway and other common electrical / Universal Heater ptc heaters thermostatic heating element1, the power line does not distinguish between positive and negative, you can freely link power 12V. 2, when the heater is dry, low thermal efficiency, it is recommended to use with the fan.
3, can be placed under a wet environment, but can not be placed in water. 4, for the first time, will produce a small amount of smoke, is a normal phenomenon, it will disappear within a short time.
5, built-in 230 degrees Celsius heater chip, when dry the surface temperature of about 200 degrees Celsius, the fan blowing, the surface temperature of about 120 degrees Celsius. 6, both ends of the product wearing bracket (PA66 high temperature nylon)
7. Test: Ambient temperature 24 degrees Celsius, the wind speed: 3.3 m / s, distance from the outlet 10 cm. Hot air temperature of about 50-60 degrees Celsius. 8, under normal circumstances, PTC heater in a very short time after the start, it will have an impact power, which is about 1.5 to 3 times the rated power, but will rapidly decline, which is normal. Please buyers understand! 9, Life: about: 3--5 years.
Recent Comments