frsky d4r buyer’s guide for 2019
We spent many hours on research to finding frsky d4r, reading product features, product specifications for this guide. For those of you who wish to the best frsky d4r, you should not miss this article. frsky d4r coming in a variety of types but also different price range. The following is the top 10 frsky d4r by our suggestions:
Best frsky d4r
1. FrSky S6R 6ch Receiver RSSI PWM Output Taranis X9D Plus X9E Horus X12S XJT in D8 Mode
Feature
Built-in a three-axis gyro and three-axis accelerometer sensor moduleWith RSSI PWM output (0~3.3V) on board
Built-in battery voltage sensor
Smart Port enable
Description
Specifications- Model Name:S6R(6ch receiver with built-in 3-axis gyro and 3-axis acceleration)
- Dimension:47.42*23.84*14.7(L*W*H)
- Weight:12.1g
- Number of Channel:6CH(1-6CH from conventional channel outputs)
- With RSSI output on board:PWM voltage output(0~3.3V),100HZ,1500500uS
- Operating Voltage Range:4.0-10V
- Operation Current:100mA@5V
- Operating Range:full range
- Gyro Measurement Range:2000dps
- Accelerometer Measurement Range:4g
- Frsky DFT/DJT/DHT in D8_mode
- Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D8 mode
- Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
- S6R-EU only works with Frsky Taranis X9D Plus-EU/X9E-EU/Horus X12S-EU/XJT-EU in D16-EU mode
2. FrSky Taranis Compatible Receiver D4R-II 4-Channel 2.4ghz ACCST w/ Telemetry & 8 Channel CPPM w/ RSSI
Feature
1) Firmware upgradeable;2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) 2.4G FrSky Two Way Receiver
Description
D4R-II is a full featured mini sized 4 channel receiver, The D4R-II's data port allows you to connect a sensor hub so you can connect GPS, Variometer, temperature, RPM and all of the other great FrSky sensors. if the jumper is used on CH3&CH4 it does output a 8 channel PPM stream plus a RSSI voltage signal on channel 2. Perfect for FPV.
Model Name:D4R-II
Compatibility: Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U
Specifications:
Dimension: 40*22.5*6mm
Weight: 5.8g / 5g (naked)
Operating Voltage Range: 3.5V-10.0V
Operating Current: 60mA
Operating Range: Full Range (>1.5km) Resolution: 3072 (>11bit)
Features: 1) Firmware upgradeable;
2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) Alarm warning on low voltage, poor reception, etc.
3. Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up Compatible With Frsky X9D / X9D Plus X9E X12S Transmitter.
Feature
This insanely tiny 2.4GHz diversity receiver available from TBS is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW. FULL RANGE, so identical to your X4R and D4R setups.Frsky XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time
Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter.
weight:16.g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone .
Frsky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.
Description
General This insanely tiny 2.4GHz diversity receiver available Package Including Frsky XM Plus receiver4. FrSky X4RSB 3/16CH Telemetry Receiver Full Range
Feature
RSSI (PWM) outputLighter weight and physically smaller than D8R-II & D6FR
Two selectable failsafe setting options - native failsafe or user programmable failsafe
S.Bus port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
External analog telemetry port (AD2)
Description
Description:- Brand name: FrSky
- Item name: FrSky X4RSB 3/16ch Telemetry Receiver
- Dimension: 40*22.5*6mm (L x W x H)
- Weight: 5.8g
- Operating Range: full range (>1.5km)
- Operating Voltage Range: 4.0~10V
- Operating Current: 100mA@5V
- Number of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)
- Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)
5. FrSky Taranis Compatible Receiver V8R4-II 4-channel 2.4ghz ACCST
Feature
1) Compatible with all FrSky modules (V8_mode & D_mode), receive only (V8R4-II can talk with module of either mode, but it does not send telemetry information back to the transmitter)2) Wider and higher voltage range (V8R4-II: 3.0~16.0V, V8R4: 3.2~7.6V)
3) Longer specified range (V8R4-II: >1km, V8R4: >500m)
4) Dimensions: 36*17.5*8mm
5) Weight: 3.5g /2.7g (naked)
Description
Model Name: V8R4
Specifications: Dimensions: 36*17.5*8mm
Weight: 3.5g /2.7g (naked)
Operating Voltage Range: 3.0~16.0V (HV version)
Operating Current: 30mA
Specified Range: >1km
New feature of V8R4-II over V8R4:
1) Compatible with all FrSky modules (V8_mode & D_mode), receive only (V8R4-II can talk with module of either mode, but it does not send telemetry information back to the transmitter)
2) Wider and higher voltage range (V8R4-II: 3.0~16.0V, V8R4: 3.2~7.6V)
3) Longer specified range (V8R4-II: >1km, V8R4: >500m)
6. FrSky Taranis Compatible Receiver V8FR-II 8-channel 2.4ghz ACCST
Feature
Condition:NewOperating voltage: 3.0~16V(HV Version)
Power consumption: 30mA
Dimensions: 44 x 24 x 14 mm
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please consider you mind or not before buying.
Description
1 x FrSky V8FR-II receiver(HV Version)7. FrSky Taranis Compatible Receiver D4R-II 4-Channel 2.4ghz ACCST w/ Telemetry & 8 Channel CPPM w/ RSSI
Feature
1) Firmware upgradeable;2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) 2.4G FrSky Two Way Receiver
Description
D4R-II is a full featured mini sized 4 channel receiver, The D4R-II's data port allows you to connect a sensor hub so you can connect GPS, Variometer, temperature, RPM and all of the other great FrSky sensors. if the jumper is used on CH3&CH4 it does output a 8 channel PPM stream plus a RSSI voltage signal on channel 2. Perfect for FPV.Model Name:D4R-II
Compatibility: Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U
Specifications:
Dimension: 40*22.5*6mm
Weight: 5.8g / 5g (naked)
Operating Voltage Range: 3.5V-10.0V
Operating Current: 60mA
Operating Range: Full Range (>1.5km) Resolution: 3072 (>11bit)
Features: 1) Firmware upgradeable;
2) One external analog telemetry port and one digital data-stream port (connect to FrSky Sensor Hub FSH-01);
3) RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM);
4) Lighter weight and physically smaller than D8R-II plus & D6FR;
5) Alarm warning on low voltage, poor reception, etc.
8. FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver
Feature
1)More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.2)Parallel two X8R to become a 16 channel receiver.
3)With RSSI PWM output (0~3.3V)
4)Smart Port enabled, realizing two-way full duplex transmission.
5)FrSky Brand
Description
Model Name:X8R-PCB
Specifications:
Dimension: 46.47*26.78*14.12mm (L *W *H)
Weight: 16.6g
Number of Channels: 16CH (1~8ch from conventional channel outputs, 1~16ch from SBUS port or combine two X8R to become a 16 channels receiver) With RSSI PWM output (0~3.3V)
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Operating Range: full range (>1.5km)
Firmware Upgradeable
Compatibility: FrSky DFT/DJT/DHT/DHT-U in D_mode FrSky Taranis X9D Plus/XJT in D8 mode
FrSky Taranis X9D Plus/XJT in D16 mode X8R-EU version only works with FrSky Taranis X9D Plus-EU version/XJT-EU version in D16-EU mode.
Features: 1)More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.
2)Parallel two X8R to become a 16 channel receiver.
3)With RSSI PWM output (0~3.3V)
4)Smart Port enabled, realizing two-way full duplex transmission.
9. FrSky D4R-II 4CH 2.4Ghz ACCST FPV Receiver (w/telemetry)
Feature
FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry)Compatible with FrSky two-way telemetry modules: DFT, DJT, DHT, DHT-U
Lighter weight and physically smaller than D8R-II & D6FR
RSSI (PWM) and CPPM output
Description
This D4R-II is a full featured mini sized 4 channel receiver by FrSky.
What makes this receiver different the the D4FR? The D4R-II's data port allows you to connect a sensor hub so you can connect GPS, Variometer, temperature, RPM and all of the other great FrSky sensors. It also has 2 full length detachable antennas. All of this is available in a package just a little larger then the D4FR.
Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U
Specifications:- Dimension: 40*22.5*6mm
- Weight: 5.8g / 5g (naked)
- Operating Voltage Range: 3.5V-10.0V
- Operating Current: 60mA
- Operating Range: Full Range (>1.5km)
- Resolution: 3072 (>11bit)
- Firmware upgradeable!
- 2 full length antennas (replaceable)
- One external analog telemetry port and one digital data-stream port (connect to Sensor Hub FSH-01)
- RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM)
- Lighter weight and physically smaller than D8R-II Plus & D6FR
- Alarm warning on low voltage, poor reception, etc.
Instruction Manual for D4R-II
Firmware Upgrade Instructions
10. FrSky Taranis X9D Plus 2.4GHz ACCST Radio (Mode 2) & D4R-II Receiver
Recent Comments