Expert choice for amp meter dc clamp
When you want to find amp meter dc clamp, you may need to consider between many choices. Finding the best amp meter dc clamp is not an easy task. In this post, we create a very short list about top 10 the best amp meter dc clamp for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 amp meter dc clamp:
Best amp meter dc clamp
1. Etekcity Digital Clamp Meter Multimeter, MSR-C600 Auto-Ranging Multimeters AC/DC voltmeter Ammeter with Voltage, AC Current, Amp, Volt, Ohm, Diode and Resistance Test Tester
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. Proster Digital Clamp Meter Auto-Ranging Multimeter TRMS 6000 Counts with NCV AC/DC Voltage Current Continuity Capacitance Resistance Frequency Diode Temperature Hz Non-Contact AC Voltage
Feature
Reliable Clamp Multimeter with True RMSAccurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household.Auto-Ranging with NVCThe meter will automatically select the appropriate auto range; NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way
Clamp MeasuringClamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles
Continuity Test & Overload Protection Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.
FeaturesHigh Resolution, Large Backlit LCD Screen and Clamp light to improve Visibility in Dark Place. Low Battery Display and Automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized; Portable to Carry and Use.Widely used in your life.
Description
Specification: Basic function: Range: DCV:600mV/6V/60V/600V (0.5%+3) ACV: 600mV/6V/60V/600V (0.8%+5) DCA: 0-600A (2.0%+30) ACA: 0-600A (2.0%+30) Resistance: 600/6k/60k/600k/6M/60M (0.8%+3) Capacitance: 60nF/600nF/6uF/60uF/600uF/6000uF (3.5%+20) Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/20MHz (0.1%+3) Temperature: (-40~1000 )/(0~1832 ) (1.0%+5) Special function: Diode test: Continuity test:Less than 5010 Low battery indicator:Approx. less than 2.6 V Data hold: NCV: Auto power off:About 15 minutes Trms test: Function protection: Clamp light: Backlight display: Input impedance:10M Sampling rate:3 times/s AC frequency response:Current 50-60Hz/ voltage 50-400Hz Operation method:Auto or manual range Max display:6000 Clamp opens:28mm Battery:3V (2*AAA battery) General Characteristic: Meter color:Orange and Black Meter weight:About 200g (including battery) Meter size:21011045mm Standard accessory:Test leads, battery, manual, temperature probe,alligator clip Notes: 1. All clamp meters can measure current through a single wire, if you put two wires into the clamp jaw, the reading will be zero, only from one wire, you will get exact digits. Package Content: 1 x Clamp Meter 1 x K-Type Thermocouple 1 x Test Leads (Pair) 1 x Alligator Clip(1 pair) 2 x 1.5V AAA Batteries(Inside the Clamp meter) 1 x User Manual 1 x Cloth Pouch3. Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect
Feature
MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.WITH NCV & LIVE LINE TEST FUNCTION: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
CONTINUITY TEST & OVERLOAD PROTECTION: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
EASY TO USE AND READ: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
YOU WILL GET: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
Description
Specifications:Brand Name: Meterk
Material: ABS
Color: Orange
Safety Class: 600V CAT , pollution class RoHS CE FCC WEEE
Operating Altitude: 2000 meters
Temperature Coefficient: 0.1x accuracy/ (18 or 28)
Max. allowable voltage between terminals and earth ground: 600V DC or 600V AC True RMS
Sampling Speed: approx. 3 times / second
AC Current (A): 40A/400A (3.0%+6)
DC Current (A): 40A/400A (3.0%+6)
AC Voltage (V): 4V/40V/400V/600V (1.2%+10)
DC Voltage (V): 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
Resistance (): 400/4K/40K/400K/4M (0.8%+2), 40M (1.0%+2)
Capacitance (F): 40nF/400nF/4F/40F/100F (3.0%+10)
Hz: 50Hz-100KHz (1%+2)
Duty Ratio: 0.1-99.9% (3%+3)
NCV Test Pencil: 90V AC Voltage
General Characteristic
Display Count: 4000 (3 3/4 LCD)
Auto Range: YES
Max Clamp Opening Size: 26mm / 1.02in
Diode: Around 1.5V
NCV: YES
Diode/Continuity: YES
Frequency/Duty Cycle: YES
Data Hold: YES
Zero Mode: YES LCD Backlight: YES
Overload Indication: shows "OL" on the LCD
Auto Power Off: YES
Continuity Buzzer: YES
Low Battery Indication: YES
Input Protection: YES
Input Impedance for DCV: 10M
Power: AAA 1.5V x 3Included
Safety Rating: CE CAT.III600V RoHS CE FCC
Package List:
1 * Clamp Meter
2 * Test Lead
1 * Storage Bag
1 * User Manual(English + French + German + Italy + Spanish)
4. Multimeter, Tacklife CM01A Clamp Meter 4000 Counts Auto-Ranging Digital Tester with NCV, AC/DC Voltage, Current, Ohm, Continuity Electrical Tester, Diode, Resistance,Capacitance Meters
Feature
BETTER CLAMP METER: Auto-ranging clamp meter measuring AC and DC Voltage, Current; Resistance, Diode, Continuity, Duty Cycle ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safelyNCV DETECTOR: If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Work is more convenient, devoting to using the great meter to improve your life quality
HUMANIZED MULTIMETER - With the backlight display to read and record easily under dark areas; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Devoting to optimize user experience, perfect for both professional or new users
USER-FRIENDLY TESTER: The "ZERO" key make for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Ergonomic design, better feeling of grasp to measure circuit; Made of high quality ABS, lightweight and portable
WAHT YOU GET: 1x Tacklife CM01A digital clamp meter, 2x Test Lead, 3x AAA Batteries, 1x user manual, 2 months warranty; Be assured of purchase Tacklife CM01A digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problems
Description
Tacklife CM01A Digital Clamp Meter is a portable, handheld professional meter has everything you need for a full multimeter.It is designed according to IEC1010-1,IEC1010-2-030 and IEC1010-2-032 concerning safety requirements.
This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices.
(such as electronic equipment, automotive, domestic appliances, power supplies, and wiring systems. )
Tacklfie CM01A has the power to get the job done faster, safer, and easier.
- Jaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
- NCV function to detect AC voltage, get rid of risk of electric shock
- Use the PTC protection circuit for Resistance
- Features Data Hold, Max Reading and an easy-to-read large LCD
- The operator can access measurement result in a dark place with the flashlight.
- The clamp multimeter includes a lightweight portable carry pouch for easy storage and handling.
- The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring.
Specification:
DC Voltage Range and Accuracy: 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
AC Voltage Range and Accuracy: 4V/40V/400V/600V (1.2%+10)
DC Current Range and Accuracy: 40A/400A (3.0%+6)
AC Current Range and Accuracy: 40A/400A (3.0%+6)
Resistance Range and Accuracy: 400/4K/40K/400K/4M (1.2%+2), 40M (2.0%+5)
Capacitance Range and Accuracy: 40nf/400nf/4uf/40uf/100uf (3.0%+1-0) Display: 4000 counts
MAX clamp opening size: 26mm
Sampling speed: approx. 3 times / second
Digital display: 3 3/4 LCD
Package:
1x Tacklife CM01A digital clamp meter,
2x Test Lead,
3x AAA Batteries,
1x User Manual,
24 Months Warranty.
5. Mastech MS2115A True RMS DIGITAL DC/AC CLAMP METERS Multimeter Amp Voltage R HZ
Feature
LCD with 5999 countsJaw size up to 40mm/1.6 inch
DC/AC current measurement up to 1000A
Tests AC/DC voltage and current, resistance, capacitance, frequency and duty cycle
Built-in Non-contact voltage detector
Description
AC voltage / current measurement True RMS; Data Hold; MAX/MIN value measurement; REL Test; Non-contact voltage detector function; Display Backlight / Flashlight / Work Light function; Low Battery Display; Inrush Current Test.General
Brand MASTECH
Model MS2115A
Quantity 1Piece
Color Black + Green
Material Copper + iron + ABS
Specification
Screen Size 4.5 x 3.0cm
Max. Display 6000
DC Voltage 60mV/600mV/6V/60V/600V(0.7% +3) 1000V(0.8% +2)
AC Voltage 60mV / 600mV / 6V / 60V / 600V(0.8% +3) 750V(1% +4)
DC Current 60A / 600A / 1000A (2.5% + 6)
AC Current 60A / 600A / 1000A (2.5% + 6)
Resistance 600 / 6k / 60k / 600k / 6Mohm (0.8% +3) 60M ohm(1.2% + 3)
Capacitance Accuracy 10nF / 100nF / 1000nF / 10F / 100F / 1000F / 10mF / 100mF (4.0% + 5)
Frequency Accuracy Frequency (From Clamp) 0~10KHz (1.5% + 5); Frequency (AC Voltage) 0~10KHz (1.5% + 5); Logic Frequency 0~60MHz (0.5% + 3)
Transistor Test No
Temperature Test No
Frequency Test Yes
Power Consumption Test No
Short-Circuit Protection Yes
Short Curcuit Buzz Yes
Auto Power Off Yes
Powered By 6F22 9V battery
Battery Number 1
Battery included or not Yes
Other Features
Other Features Jaw Opening: 40mm/1.6"; Continuity Buzzer: <50; Duty Cycle:10%~90% 3.0%; Diode:2.7V
Certification CE; CAT.III 1000V CAT.IV 600V
Dimensions & Weight
Dimensions 9.37 in x 3.62 in x 1.97 in (23.8 cm x 9.2 cm x 5 cm)
Weight 26.1 oz (740 g)
Packing List
1 x Meter
1 x Test Probe
1 x English User Manual
1 x Pouch
6. Signstek UNI-T UT210E Handheld RMS AC/DC Mini Digital Clamp Meter Resistance Capacitance Tester
Feature
Can be used to measure AC/DC Current, AC/DC Voltage, Resistance, CapacitanceLightweight and portable, suitable for schools, factories, families and amateurs
Made of high quality ABS, durable enough for long term use
High degree of accuracy, LCD display, very easy to read
A stable, secure and reliable mini Digital Clamp Meter
Description
Features:Display Count: 2000
Auto Range:
Jaw Capacity: 17mm
True RMS:
Diode: Around 3.0V
V.F.C.:
NCV:
Data Hold:
Zero Mode:
LCD Backlight:
Auto Power Of: Around 15 Minutes
Continuity Buzzer:
Low Battery Indication: 2.5V
Input Protection:
Input Impedance for DCV: 10M
Specifications
AC Current (A2A/20A/100A (2.5%+5)
DC Current (A)2A/20A/100A (2%+3)
AC Voltage (V)2V/20V200V/600V (1.03
DC Voltage (V)200mV/2V/20V200V/600V (0.7%+3)
Resistance ()200/2K/20K/200K/2M/20M (1.0+2
Capacitance (F)2nF/20nF/200nF/2F/20F/200F/2mF/20mF (4%+5)
General Characteristic
Product Net Weight: 170g
Product Size: 175mm * 60mm * 33.5mm
Power: AAA 1.5V x 2
LCD Size: 39.3mm * 21.5 mm
Product Color: Red and Grey
Package Size: 18.6 * 7.2 * 5.9cm / 7.3 * 2.8 * 2.3in
Package Weight: 328g / 11.6oz
Package List:
1 * UNI-T UT210E Mini Clamp Meters
1 * Test Lead
1 * English Manual
7. Fluke 325 Clamp Multimeter AC-DC TRMS
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
400 A AC and DC current measurement
Resistance measurement up to 40
Ac voltage make for the most accurate measurements on non-linear signals
Temperature and capacitance measurement
Frequency measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The FLUKE-325 is ideally suited for current measurements up to 400 a in tight cable compartments.8. FLUKE 362 True-rms AC DC Clamp Meter
Feature
The lead time is about 2-3 days. FedEx/DHL shipping time is about 5-7 days.If any questions, please do not open any claims, please contact us first.
Description
Features:
compact design, allows single handed operationLarge-screen display of 2000 characters
200A AC and DC current, 600V AC & DC voltage measurement
3000 ohm resistance range, continuity test
Zero function, can be cleared for DC measurement
Non-detachable jaw clamp
Security level: CAT III 600V
Specifications:
1. AC CurrentRange:200
Resolution:0.1A
Accuracy:2 % 5 counts(45-65Hz);2.5% 5 counts (65-400Hz)
2. DC Current
Range:200
Resolution:0.1A
Accuracy:2% 5 counts
3. AC Voltage
Range:600 V
Resolution:0.1V
Accuracy:1.5% 5 counts (45-400Hz)
4. DC Voltage
Range:600 V
Resolution:0.1V
Accuracy: 1% 5 counts
5. Resistance
Range:300/3000
Resolution:0.1/1
Accuracy: 1% 5 counts
6. Continuity Test:<=70
7. Size
Dimensions:2056022
Clamp opening:18mm
Weight (g):196
8. Security Level:CAT III 600V
9. Bluetooth AC DC Clamp Mutlimeter Amp Meter with Temp Testing, Auto-ranging Measures Current, Voltage, Resistance, Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ampmeter (BTMETER BT-570CAPP)
Feature
HIGH-QUALITY CLAMP METER - Shipped from USA and fulfilled by Amazon. Function : 4000 count Auto Range , AC/DC voltage, AC/DC current, resistance, diode, continuity , Capacitance, Temperature , Frequency, Duty Cycle, Relative Value, Data Hold, Back Light, Auto Power off , etcBATTERY INCLUDED - Contain 1pcs 9V(6F22) built-in insulated Battery to prevent power consumption, please open the rear cover install battery properly before using.
TEST LEADS - AC DC amp meter comes with 1 pairs of test cables (for extended use) and Temperature Probe
BLUETOOTH CLAMP METER - BT-570CAPP Clamp meter multimeter can be controlled on your phone, Back Light LCD Display , Jaw Caliber Size 1.77 inches ( 45mm )
DOUBLE FUSE - IEC 61010-1 & CATIV 600V / CATIII 1000V overload protection on all ranges. 1 year warranty
Description
The BTMETER BT-570C-APP Auto Ranging Digital Clamp Multimeteris the perfect DIY hand tool for troubleshoot electrical problems in a widearray of
industrial and household devices such as electronic equipment, motorcontrols, domestic appliances, power supplies and wiring systems.
It's compact, lightweight but durable and very easyto operate. It can measure AC/DC current, AC/DC voltage, resistance, continuity(buzzer), transistor and
diodes with a very high degree of accuracy . CATIV 600V / CATIII 1000V certificationmake sure working safety.
The back Light LCD display will help user working in dark and dimly places. Jaw Size up to 1.77 inches ( 45mm ) for measuring
many size cablesflexible.
Each unit comeswith one pre-installed 9V (6F22) Battery, 1 pairs of high quality Test Leads(for longer use) and User Manual.
Specifications:
Range Selection: Auto Ranging
Max Display: 4000
DC Voltage: 400mV~ 1000V
AC Voltage: 4V~ 750V/p>
DC Current: 200A/1000A
AC Current: 400A/1000A
Resistance: 400ohm~40Mohm
Capcitance:51.2nF~100uF
Frequency:5.12Hz~5.12MHz
Duty cycle:0.1%~99.9%
Temperature:-20~-1000(-4~1832)
Backlight Display
Overload protection
Data HoldDiode Test
Auto power off
PhoneAPP
Power Supply: 9V(6F22) * 1pcs
What's in Package?
1x Digital Clamp Multimeter
1x 9V(6F22) Battery (Pre-installed)
2x Test Leads (Red and Black)
1x Temperature probe
1x User Manual (English)
10. Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV
Feature
True RMS feature for accurate readings regardless of waveforms1.2" (30mm) jaw size fits conductors up to 500MCM
Large backlit LCD display and built-in Flashlight
Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator
Recent Comments