Best vernier force
If you looking for vernier force then you are right place. We are searching for the best vernier force on the market and analyze these products to provide you the best choice.
Best vernier force
1. FP-BTA - Vernier Force Plate - Vernier Force Plate - Each
Feature
Vernier Force PlateDescription
Study Newtons Third Law About the size of a bathroom scale, the Vernier Force Plate measures forces of stepping, jumping and other human-scale actions. You can observe the change in normal force during an elevator ride, or measure the impulse delivered by the floor when you jump. The Force Plate has two ranges, one for larger forces up to 3500 N, and a more sensitive 800 N range for pushing experiments. Use with LabQuest Mini or LabQuest sensor interfaces, sold separately.2. DFS-BTA - Vernier Dual-Range Force Sensor - Vernier Dual-Range Force Sensor - Each
Feature
Vernier Dual-Range Force SensorDescription
This sensor is for use in a wide variety of experiments. -Replacement for a Hand-Held Spring Scale -Sensor Can Be Mounted Horizontally on a Dynamics Cart -General-Purpose Sensor for Measuring Pushing and Pulling Forces. -Sensor Can Be Used to Study Newtons Third Law It's a general-purpose sensor for measuring pushing and pulling forces. Two ranges allow you to measure forces as small as 0.01 Newtons and as large as 50 Newtons. It is for educational use only.3. 1 Pc DF 9-40 High Precise Force Sensing Resistor Thin Film Force Pressure Sensor (0-20kg)
Feature
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrateHighly sensitive flexible nanometer materials can realize highly sensitive detection of pressure
It has pressure sensitive function as well as water-resistant function
When sensor detects outside pressure, the resistance of sensor will change
Pressure signal can be converted into a corresponding electrical signal output using simple circuit
Description
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: 2.5%(85% measuring range)
Repeatability: <5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10M(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.
4. Vernier Software Dual Range Force Sensor DFS-BTA
Feature
Dual Range Force SensorDescription
Dual-range force sensor (for labquest labpro go! link easylink cbl 2 and cbl)..The dual-range force sensor has two ranges: +/- 10n or +/- 50n. It can be easily mounted on a ring stand or dynamics cart (mounting bracket included) or used as a replacement for a hand-held spring scale. Use it to study friction simple harmonic motion impact in collisions or centripetal force. This force sensor is used for experiments in our physics physical science and middle school science lab manuals. Easily mounted on a ring stand or dynamics cart or used as a replacement for a hand-held spring scale; two ranges: +/10 and +/50 newtons (push/pull); purposes/functions: study friction simple harmonic motion impact in collisions or centripetal force; this force sensor is used for experiments in vernier's physics and physical science lab manuals; course usage: physics & physical science.5. Anytime Tools 0-6" Premium OUTSIDE MICROMETER Machinist Tool Set Round Frame 0.0001" Precision Vernier Scale w/CARBIDE TIPS
Feature
Includes 6 Premium Quality Micrometers with measuring ranges: 0-1", 1-2", 2-3", 3-4", 4-5", 5-6"Super Hard Carbide Anvils
Complete with calibration standards and wrenches
Graduations: 0.0001" Laser Etched Graduations will never fade!
Ratchet Thimble handle for precise application of force. Fitted wood case included!
Description
Premium Quality Professional Precision Measuring Tools
0-6" Micrometer Set:
Crisp, clear, easy-to-read graduation, accurate to .0001". Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with standards and calibration wrench.
Features:
- Graduations: 0.0001" with Vernier Scale
- Includes 6 Micrometers with measuring ranges: 0-1", 1-2", 2-3", 3-4", 4-5", 5-6"
- Super Hard Carbide Tipped Anvils
- Complete with calibration standards and wrenches
- Ratchet Thimble Handle for precise application of force.
- Lock nut
- Cast Steel Frame - Powder coated baked finish
- Fitted wood padded case included!
- Laser Etched Graduations will never fade!
6. High Precise Force Sensing Resistor Resistance-type Thin Film Pressure Sensor 0-200g
Feature
This flexible pressure sensor is made of ultra-thin film of excellent mechanical property, excellent conductive materials and nanometer pressure sensitive layersHighly sensitive flexible nanometer materials can realize highly sensitive detection of pressure
When sensor detects outside pressure, the conductivity of sensor will change, and increases along with pressure
It is highly resistive when there is no load, and resistance will decrease as pressure increases
Pressure signal can be converted into a corresponding electrical signal output using simple circuit
Description
Features:
This flexible pressure sensor is made of ultra-thin film of excellent mechanical property, excellent conductive materials and nanometer pressure sensitive layers.Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
When sensor detects outside pressure, the conductivity of sensor will change, and increases along with pressure. It is highly resistive when there is no load, and resistance will decrease as pressure increases.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0~200g
Thickness: <0.15mm
Response Point: <10g
Repeatability: <2.7%(50% load)
Precision: 2.5%
Lifespan: >1million times
Initial Resistance: >10M(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
Operating Temperature: -20 ~ 60
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 5mm
Sensing Area Inner Diameter: 3.4mm
Pin Spacing: 1.0 mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note:
1, Please allow small size error due to manual measurement. Thanks for your understanding.
2, Try to make load force evenly applied on sensor, avoid direct contact with sharp object.
3, Over-load use will deteriorate sensor performance or even cause damage.
7. Cameron Sino Battery Compatible With Vernier Go Direct Acceleration Sensor, Go Direct Ammonium Ion-Selecti, Go Direct Calcium Ion-Selectiv, Go Direct Chloride Ion-Selecti and Other Models(300mAh)
Feature
Please ensure both model and battery part number are matched with your device before purchasing( you can find related information in product description).Product Type: Li-Polymer Volts: 3.7V Capacity: 300mAh
Dimension: 41.56 x 20.20 x 4.90mm Weight: 40g
Certificated with FCC, CE,CB,ISO9001,and RoHS.
14 Days Money Back Guaranty and 12-Months Warranty
Description
Cameron Sino battery will give your old stuff a new life!Fit Model
Vernier Go Direct Acceleration Sensor, Go Direct Ammonium Ion-Selecti, Go Direct Calcium Ion-Selectiv, Go Direct Chloride Ion-Selecti, Go Direct Colorimeter, Go Direct Conductivity Probe, Go Direct Current Probe, Go Direct Drop Counter, Go Direct EKG Sensor, Go Direct Electrode Amplifier, Go Direct Energy Sensor, Go Direct Force, Go Direct Gas Pressure Sensor, Go Direct Glass-Body pH Sensor, Go Direct Ion-Selective Electr, Go Direct Light and Color Sens, Go Direct Nitrate Ion-Selectiv, Go Direct ORP Sensor, Go Direct pH Sensor, Go Direct Potassium Ion-Select, Go Direct Radiation Monitor, Go Direct Respiration Belt, Go Direct Rotary Motion Sensor, Go Direct Surface Temperature , Go Direct Temperature Probe, Go Direct Tris-Compatible Flat, Go Direct Voltage Probe, Go Direct Wide-Range Temperatu
Original battery Part Number
Vernier GDX-BAT-300
Capacity 300mAh
Please ensure both model and battery part number are matched with your device before purchasing.
8. Inside Micrometer Screw Tubular Vernier Extension - 1PCs
Feature
80% ORDERS ARRIVE WITHIN 5-9 BUSINESS DAYS:This item can be searched by below relevant keywords: 30mm stainless steel inside micrometer screw internal diameter measuring tool
the precise mechanical structure makes reading conveniently
built in stop force device ensure accurate repetitive readings
insulation frame design
Description
features : efficiency one hand measurementmetal measuring surface durable
specification :
material: stainless steel
color: silver
range: 5-30mm
resolution: 01mm
package includeds :
x inside micrometer
x wood case
x wrench
137 205 mitutoyo micrometer anvil spindle tip stop starrett and set range graduation solid rod accuracy with a nist traceable ,For inside outside measurement tool dgol pc prison guard , ,
9. AccusizeTools - 0-6" x 0.0001" Ultra-Precision Outside Micrometers with CARBIDE TIPS 6 Pcs/Set, EG00-0906
Feature
Includes 6 micrometers with Measuring Ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6'', Vernier Graduations: 0.0001'', accurate to 0.0001''. Mitutoyo style frame - solid casting frame.Lock nut
Includes wood case, adjustment wrench and calibration standards
Recent Comments