Top tuner lugs steel for 2022
Finding the best tuner lugs steel suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best tuner lugs steel
1. Circuit Performance Forged Steel Extended Open End Hex Lug Nut for Aftermarket Wheels: 12x1.5 Black - 20 Piece Set + Tool
Feature
Thread Pitch: 12x1.5Color: Black
Quantity: 24 Lug Nuts + 1 Spline Tool
Lug Seating: Tuner Style 60 degree seating
100% Authentic Circuit Performance Product
Description
Circuit Performance CP50R Extended Open Ended Lug Nuts are the perfect way to finish your new wheel installation. The ultra-thin design is ideal for smaller diameter lug holes found on aftermarket wheels. These lug nuts feature an open-end design which are perfect for racing applications where extended studs are used. Perfect for your new set of aftermarket aluminum or steel wheels that use a 60 degree tuner style lug seating.Don't risk scratching your new wheels! The specially designed thin wall socket tool (included) is made out of extremely stong CR-V steel. This tool was designed to be as thin as possible and fits down into the thinnest lug holes found on wheel brands such as XXR, Avid.1, etc.
Features
60 degree tuner style seating
Steel lug nut construction for maximum durability
Ultra-thin design
Special CR-V steel socket for installation included
Tool is heat treated for extra strength
Lightweight yet strong design
What's Included?
Twenty (20) 12x1.5 Black Circuit Performance CP50R Extended Open Ended Lug Nuts, Brand New
One (1) Circuit Performance 17mm ultra thin socket, Brand New
Lug Nut size:
Overall Length: 50mm
Overall Width: 22mm
These lug nuts should be hand torqued to 80 FT/LBS. These lug nuts are designed for aftermarket wheels only and do not work on most factory wheels. If you are not 100% sure what thread pitch lug nut your vehicle uses just ask us and we will be happy to let you know.
2. DPAccessories D5245P-2308/20 20 Black 12x1.25 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels
Feature
FITS: Aftermarket wheels requiring a lug nut with a conical 60 degree seat and small diameter like spline drive or tuner style nuts.WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer.
SPECS: M12x1.25 thread - Closed End Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide
REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set.
INCLUDES: 20 Black Closed End Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging.
3. DPAccessories D5246P-2308/20 20 Black 12x1.5 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels
Feature
DO THEY FIT? Verify fitment with your vehicle by using the compatibility tool on this page before making your purchase.FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut. These parts not intended to replace factory lug nuts on factory wheels.
SPECS: M12x1.50 Thread - Closed End Spline Tuner Style Lug Nut - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide
REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set.
INCLUDES: 20 black closed end spline tuner lug nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging.
4. StanceMagic 20pcs Neochrome 12x1.5 Extended Tuner Lug Nuts - Open End, Cone Seat, 50mm (2") Length, 22mm (0.87") Width, 17mm Hex - Compatible with Acura Honda Lexus Mazda Scion Kia Toyota Hyundai
Feature
Compatible with Acura. Compatible with Chevrolet Camaro Corvette S10 Blazer. Compatible with GMC Jimmy S15. Compatible with Honda Accord Civic. Compatible with Hyundai Veloster Tiburon. Compatible with Lexus IS GS. Compatible with Kia Optima. Compatible with Mazda Miata RX8. Compatible with Mitsubishi Eclipse Lancer. Compatible with Scion xB tC. Compatible with Toyota Avalon Camry Corolla. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have M12x1.5 12x1.5mm Studs.Total Length: 2" (50mm) | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Neochrome | HEX SIZE: 17mm | STYLE: Tuner / Race Style Lug Nuts. See Diagram for Measurements.
SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
INCLUDED: One Package contains a 20 Pack of Tuner / Race Style Lug Nuts. These multi-colored Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You'll also need a 17mm Hex Socket Key Tool.
These 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Mazda, Mitsubishi, Toyota, Acura, Honda, Lexus, Hyundai, Kia, Scion vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.
5. Circuit Performance Spline Drive Tuner Acorn Lug Nuts Black 12x1.5 Forged Steel(20pc + Tool)
Feature
Thread Pitch: 12x1.5Color: Black
Quantity: 20 Lug Nuts + 1 Spline Tool
Lug Seating: Tuner Style 60 degree seating
NOTE: THE AMAZON VEHICLE GUIDE DOES NOT WORK ON THIS LISTING
6. Circuit Performance Tuner Key Acorn Lug Nuts Black 12x1.25 Forged Steel (20pc + Tool)
Feature
Thread Pitch: 12x1.25Color: Black
Quantity: 20 Lug Nuts + 1 Tuner Tool
Lug Seating: Tuner Style 60 degree seating
100% Authentic Circuit Performance Product
7. Dynofit 12mmx1.5 Wheel Lug Nuts, 20 Chrome M12x1.5 Luguts Conical/Cone Seat 1.38'' Tall 19mm Hex M12-1.50 Steel for 5 Lug Tuner Wheels
Feature
For wheels with 12mm x 1.5 thread pitch and conical seat(pictured), wheel nut hole must larger than 23mmNot for wheels with different thread pitch or mag/ball seat, heavy trucks not recommend
Specs: m12 1.5 thread, 1.38" tall and 0.9"(23mm) diameter, set of 20 and no socket key
Solid hard SCM 435 Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread
2 year warranty! free exchange if painting off or rusting!
8. Circuit Performance Tuner Key Acorn Lug Nuts Black 12x1.5 Forged Steel (20pc + Tool)
Feature
Thread Pitch: 12x1.5Color: Black
Quantity: 20 Lug Nuts + 1 Tuner Tool
Lug Seating: Tuner Style 60 degree seating
100% Authentic Circuit Performance Product
9. 6 Point Spline Drive Tuner Socket Key Tool for Six-Spline Wheel Lock Lug Nuts - 17.6mm Inner Diameter - Compatible with 19mm (3/4) and 21mm (13/16) Replacement Hex Socket - Black 1pc
Feature
1pc 6 Spline Lug Nut Socket Key Replacement. Compatible with 6-sided Spline Type Tuner Locking Lug Nuts with smaller diameter. Typically 12x1.5, 12x1.25, 1/2"x20 threads.[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle.
[Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 6-Spline lug nut is smaller than 17.6mm.
[Verify Spline Count] Please double check your lug nut before purchasing. This only works for 6-sided spline lug nuts, as there are multiple spline types on the market.
Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16".
10. dynofit m12x1.5 Wheel Lug Nuts Black, (20+1)12mmx1.5 Spline Lugnuts Aftermarket Tuner YJ MK RT Accord Civic CRV Odyssey Element HR-V Legend XR-V Courier Escape Escort Fiesta Focus Fusion Sierra
Feature
Fits: Any Wheels with m12-1.50 thread pitch and 60 degree conical seat (also known as cone seat/tapered seat), contact us if not sure about your thread pitchNot Fit: OEM wheels with Mag Seat or Ball Seat/Round Seat, heavy truck also not recommended
SPEC: Thread pitch m12 x 1.5, Overall tall 1.38"(35mm), Width 0.79"(20mm), Closed end 60 Degree, 1 Free Socket key 3/4"(19mm) and 13/16"(21mm)
Benefit: Anti-Rusting and Anti-Stripped: SCM 435 Steel(High Strength and Durability), quality durable surface dealing process, clear and clean pitch thread, grasp more tight
Comes: 20 x black Lug Nuts Kit+1 Key with Pro Shock-Proof Box as picture(anti-scratching)
Recent Comments