Best spindle hub to buy in 2019

We spent many hours on research to finding spindle hub, reading product features, product specifications for this guide. For those of you who wish to the best spindle hub, you should not miss this article. spindle hub coming in a variety of types but also different price range. The following is the top 10 spindle hub by our suggestions:

Best spindle hub

Product	Features	Editor's score	Go to site
	WARN 32720 Spindle Nut Kit		Go to amazon.com
	2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub		Go to amazon.com
	Powerbuilt 648473 Spindle Nut Socket, Four Outer		Go to amazon.com
	Southwest Wheel 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub		Go to amazon.com
	Spindle Hub Repair CD Laser part for Playstation 1 PS one PS1		Go to amazon.com
	R and P Carriages Build Your Own Trailer Axle 4 x 4 Bolt Hub Assembly with 1" Straight Round Spindles & Bearings		Go to amazon.com
	Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings		Go to amazon.com
	Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKRD-3500545) Includes (2) 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings		Go to amazon.com
	Rigid Hitch Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKRD-3500545F) Includes (2) Flanged, 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings		Go to amazon.com
	Dorman 615-186 Axle/Spindle Nut, (Pack of 2)		Go to amazon.com

Related posts:

1. WARN 32720 Spindle Nut Kit

Feature

Service replacement part
For use on WARN hub sets
For maintenance and replacements

Description

This is a service replacement kit, designed to fit with WARN hub sets. This kit was designed to fit the following WARN hub sets: 9790, 29071, and 20990. A spindle nut kit is composed of a various collection of washers, bearing locknuts, and bearing adjusting nuts to aid with maintenance and or replacements.

2. 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub

Feature

1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
5-4.5" BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

3. Powerbuilt 648473 Spindle Nut Socket, Four Outer

Feature

Made to be the most reliable tools in the market today
Tool solutions for most all situations
Built to exceed tool standards
For easy removal of spindle nuts; Not for impact wrench use
4-lug, 2-3/8-inch outer diameter, 1/2-inch drive
Fits the following vehicles: Chevrolet/GMC - 1/2-ton Pickup, Blazer and Jimmy; Ford - Bronco, Bronco II, Ranger, Explorer 1/2 and 3/4-ton F-Series Pickup w/spline-type hub; International - 1100 series; Dodge - 1/2-ton Pickup and Ramcharger
Black chrome vanadium
Lifetime Warranty

Description

Powerbuilt by Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of tools and shop equipment. Founded in 1979, the Long Beach, California based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. The company's mission statement: Alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers' expectations of quality, service and value, while achieving profits to ensure the Company's and its employees' future growth and development. Alltrade offers our customers innovation, flexibility and speed to market.

4. Southwest Wheel 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub

Feature

1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
4-4" BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

5. Spindle Hub Repair CD Laser part for Playstation 1 PS one PS1

Feature

Type: Laser Parts.
Platform: Sony PlayStation 1.
Excellent for getting older consoles up and running again.
Package include: 1 x Spindle Hub.
Please check the description & picture before Buying!

Description

Brand New and High Quality.

Platform: Sony PlayStation 1.

Excellent for getting older consoles up and running again.

Type: Laser Parts.

Package include: 1 x Spindle Hub.

Please check the description & picture before Buying!

6. R and P Carriages Build Your Own Trailer Axle 4 x 4 Bolt Hub Assembly with 1" Straight Round Spindles & Bearings

Feature

Pair of 1" straight spindles includes castle nuts and cotter pins.
Bearings included - (4) L-44643 1" inside dimension x 1.98" Outer Dimension
Races are Pressed in to Hubs
Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1 inch.

Description

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (8) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

7. Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

Feature

Pair of 1-3/8" to 1-1/16" tapered spindles.
Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
Spindles feature a SQUARE 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"

Description

Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

8. Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKRD-3500545) Includes (2) 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

Feature

Pair of 1-3/8" to 1-1/16" tapered spindles.
Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (measured center of hub)
Spindles feature a ROUND 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"

Description

Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

9. Rigid Hitch Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKRD-3500545F) Includes (2) Flanged, 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

Feature

Pair of flanged 1-3/8" to 1-1/16" tapered spindles.
Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
Spindles feature brake flange and a round 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"

Description

Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D dust caps with (2) plugs. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

10. Dorman 615-186 Axle/Spindle Nut, (Pack of 2)

Feature

Type: 8
Thread: M24-2.0
Hex Size: 24.6 Millimeters
OE part number: 6504007

Description

Dorman offers a comprehensive variety of nuts for almost any automotive fastening job. All the nuts are constructed of high-quality materials for long-lasting durability.

Conclusion

All above are our suggestions for spindle hub. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using spindle hub with us by comment in this post. Thank you!