Best rc servo ball joint for 2022

There are many reasons you might choose to buy rc servo ball joint but it is not easy to find the best suitable rc servo ball joint for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best rc servo ball joint.

Best rc servo ball joint

Product	Features	Editor's score	Go to site
	BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/61/8, 1/10, 1/12 RC Car/Robot/Boat		Go to amazon.com
	Hobbypark 25pcs Adjustable Pushrod Connector Linkage Stoppers D1.3mm RC Airplane Plane Parts		Go to amazon.com
	uxcell 4 PCS M3/3mm 26mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Silver Tone for RC Crawler Boat		Go to amazon.com
	uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Blue for RC Crawler Boat		Go to amazon.com
	uxcell 5 PCS 2mm/M2 Linkage End Tie Rod End Metal Ball Head Black for RC Boat Airplane Robot		Go to amazon.com
	uxcell 10 Pcs M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End without Screws and Nut for RC Robot		Go to amazon.com
	Maxmoral 5pcs M3 Ball Head Holder Tie Rod Ends Ball Joint Link for RC Model Car Boat Airplane DIY Accessories		Go to amazon.com
	10Pcs ShareGoo Aluminum M2 Tie Rod End Ball Joint Link Ball Head Holder 2mm Steering Linkage Compatible with HSP Tamiya Mini 4WD RC Car Truck Crawler Boat Airplane		Go to amazon.com
	Micro Traders 20Pcs M2 Ball Head Holder Tie Rod End Joint Fit for RC Car Steering Plane/Glider Control Surfaces Boat Rudder/Throttle Servo Horns Accessory 2.0xL19mm (EA|737-A)		Go to amazon.com
	Que-T 10pcs Ball Head Holder Tie Rod End M2 Ball Joint Linkage for RC Hobby Model Car Truck Boat (19mm)		Go to amazon.com

1. BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/61/8, 1/10, 1/12 RC Car/Robot/Boat

Feature

High Torque ServoThis 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.
Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control.
All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.
Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm); Weight:2.7oz (80g); With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories.
Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment.

2. Hobbypark 25pcs Adjustable Pushrod Connector Linkage Stoppers D1.3mm RC Airplane Plane Parts

Feature

Diameter of the Hole:1.3mm Compatible with Pushrods 1.0 / 1.1 / 1.2 / 1.3mm
Net Weight:Approx 0.7g/pc
Pack of 25pcs Push Connectors +1 Piece hex wrench

3. uxcell 4 PCS M3/3mm 26mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Silver Tone for RC Crawler Boat

Feature

FEATURES: Total length: 26mm/1.02 inch, Bottom Thread: M3 (Fit for tie rod with M3 thread) Ball head hole diameter: 3mm (fit M3 screw and nut )
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement
PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint

4. uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Blue for RC Crawler Boat

Feature

FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut )
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement
PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint

5. uxcell 5 PCS 2mm/M2 Linkage End Tie Rod End Metal Ball Head Black for RC Boat Airplane Robot

Feature

FEATURES: 2mm/M2, Bottom hole diameter: 2mm, Ball head screw size: M2 (it is for M2 thread tie rod) Total Length : 16mm/0.63 inch
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement
PACKAGE CONTENT: 5 Pcs x Linkage End Tie Rod End

6. uxcell 10 Pcs M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End without Screws and Nut for RC Robot

Feature

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.8mm/0.07 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2
SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.
ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive
PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement
PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(without Screws and Nut)

7. Maxmoral 5pcs M3 Ball Head Holder Tie Rod Ends Ball Joint Link for RC Model Car Boat Airplane DIY Accessories

Feature

Type: M3 Ball Head Holder Tie Rod End Ball Joint Link Rod End.
Made of high quality material,durable and long service life.
Size:D3XH5XL29mm.
Easy to install and durable in use,lightweight and portable to carry.
Suitable for RC Model Car Airplane.

8. 10Pcs ShareGoo Aluminum M2 Tie Rod End Ball Joint Link Ball Head Holder 2mm Steering Linkage Compatible with HSP Tamiya Mini 4WD RC Car Truck Crawler Boat Airplane

Feature

Fit M2 stud bolt,compatible with HSP Tamiya Mini 4WD RC Drift Car Truck Boat Airplane,perfectly compatible with Tamiya Mini 4wd.
Made of high quality aluminum material, durable and practical.
Full Length: 15mm;End Inner Diameter: M2;
Ball Hole Diameter: 2mm;Ball Diameter:7.5mm
Package include 10PCS M2 ball joint,easy to install.

9. Micro Traders 20Pcs M2 Ball Head Holder Tie Rod End Joint Fit for RC Car Steering Plane/Glider Control Surfaces Boat Rudder/Throttle Servo Horns Accessory 2.0xL19mm (EA|737-A)

Feature

FEATURES: Center Hole Diameter: 2.0mm/0.79 inch, Bottom Hole Diameter: 2.0mm/0.79 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2
APPLICATION: These ball joints can be used on rc car steering, rc plane/glider control surfaces and also on rc boat rudder/throttle control servo horns.
ADVANTAGE: Made up of plastic outer structure and brass ball core inner structure,they smoothly rotate 360 degrees in any direction. Fine workmanship, durable in use, make your RC more cool and attractive.
NOTICE: The bottom hole with thread, it is not a self-tapping hole. Please allow 1-3 errors due to manual measurement.
PACKAGE CONTENT: 20Pcs Ball Head Holder Tie Rod End(without Screws and Nut)

10. Que-T 10pcs Ball Head Holder Tie Rod End M2 Ball Joint Linkage for RC Hobby Model Car Truck Boat (19mm)

Feature

M2 Ball Head Rod End for RC Drift Car Truck
Made up of nylon outer structure and copper ball core inner structure.
Durable and practical.
Suit for RC Monster Truck, Crawler Cars, Drift Cars, Helicopter Model etc.
Package: 10pcs Ball Head Ends

Conclusion

All above are our suggestions for rc servo ball joint. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using rc servo ball joint with us by comment in this post. Thank you!