10 best pcie raid card 4 port for 2020
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 pcie raid card 4 port. Its followed by an in-depth review of each pcie raid card 4 port. Hopefully, once you are done reading this article, you will be well informed about pcie raid card 4 port and be able to select the right pcie raid card 4 port for you without any hesitations.
Best pcie raid card 4 port
1. I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid with Low Profile Bracket SI-PEX40064
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
Description
PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.2. StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter (PEXSAT34RH)
Feature
Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slotPCI Express 2.0 SATA Controller with HyperDuo SSD Tiering
4 Port PCI Express SATA III 6Gb
Maximize system capability with SATA III connection speeds
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Description
Add Four Internal SATA III (6Gbps) Ports To A Computer Through A PCI Express x2 Slot
The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds four AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput up to 80% of SSD performance! Note: The HyperDuo automatic storage tiering feature is compatible with Windows XP, Vista, 7, and 8 only.
Adds four internal SATA III (6Gbps) ports to a computer through a PCI Express x2 slot
View larger
View larger
Support for up to four internal hard drives using latest SATA III specification, while providing flexibility to support various RAID modes.
Four Port PCI Express GEN 2.0 SATA III (6Gbps) RAID x2 Controller Card
View larger
View larger
Leverage SSD performance and standard HDD capacity with HyperDuo technology
View larger
View larger
Maximize system capability with SATA III connection speeds
Fit any standard or low profile chassis with included brackets
View larger
View larger
The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of seven drives (up to four drives through PM on one port, and a single drive to the remaining three ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support.
Product Features & Applications
- Use SSD tiering to optimize your system for I/O intensive applications such as Office Suites, photo/video editing and media players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability
- Perfect for multi-drive internal RAID storage solutions
- Supports HyperDuo SSD auto-tiering
- Four AHCI SATA III (6Gbps) ports through PCI Express x2
- Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives
- Supports hardware RAID 0, 1, and 1+0 modes configured through BIOS
- Compliant with PCI Express 2.0 standards
- Port Multiplier FIS-based and Command-based switching supported
- Natively supported single chipset design
- Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only)
- Supports Native Command Queuing (NCQ) and ATA/ATAPI commands
- Includes Low Profile/Half-Height installation bracket
- Supports HDDs/SSDs/Optical/Blu-Ray drives
- LED headers for HDD activity LED indicators
3. Vantec 4-Channel 6-Port SATA 6GB/S PCIe RAID Host Card with HyperDuo Technology (UGT-ST644R)
Feature
4 Channel for Additional Devices. This Card will let You Grow as Your Needs Grow to Add more Devices to your System6 Flex Configurable Port for configuring as Internal SATA or External eSATA Port using simple setting on the Host Card
SATA III 6Gb/s on Every Channel for all your SSDs and HDD. This Offers the Maximum Performance for all your Drives
Port Multiplier Function For Multi-Bay Enclosures to Minimize multiple cable and Maximize Storage, Support both FIS and Command-based Switching
RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your DATA Safe and at the same time Faster Disk Access
More lanes to Prevent bottleneck for All the SATA III drives Moving Data between the Drives and the System Board
Low Profile Bracket Included to Simplify Your Installation into Standard Desktop or SlimLine or Low Profile System
HyperDuo is a Technology Created by Marvell that Encompasses Both SSD and HDD Technologies to give You the Speed Without the Premium Price
Support Windows XP, Server 2003, Server 2008, Vista, 7, 8, 8.1, 10
Description
The UGT-ST644R design encompasses great design and server technology into simple RAID Host controller. It uses the latest storage technology to bring SSD caching storage to the HDD drive to gain unparalleled access speed. This RAID Host controller enables4. I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Hard Drive Controller Card Marvell 9230 Chipset
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9230
Installed with a full profile bracket, Low profile included with the package
Port Multiplier FIS-based and Command-based switching supported
Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Supports RAID 0 and 1 modes, Requires at least a PCIe x4 slot to function
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
RAID mode Supported: RAID 0/1/1+0
HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset.
Does not support Hardware RAID using Port Multiplier
Support 3TB and 4TB GPT Hard drives
Chipset: Marvell 88SE9230
5. N N.ORANIE 4-Port SATA III 6Gbps PCIE RAID Host Controller Card Support HyperDuo SSD Tiering IPFS Hard Disk Port Multiplier Marvell 88SE9230 Chipset
Feature
PCIe 4X to 4 SATA III 6Gbps interfaces; transfer speeds up to 6Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.PCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X4 X8 X16 slots.
Port Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
Support Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap.
Support RAID Model: RAID0, RAID1, RAID10, and HyperDuo. Support Windows XP/Vista/7/8/Sever 2008 R2/10(32/64 bit) and newer.
6. Ziyituod SATA 3.0 Card with 4 SATA Cables, PCIe SATA Controller Expression Card with Low Profile Bracket,ASM1061+ASM1093 Chip Non-Raid, Boot as System Disk, Support 4 SATA 3.0 DevicesSA3004
Feature
Add 4 6Gb/s SATA 3.0 devices to your desktop PC.Software Raid Supported,not hardware RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.Chipset --- With using The chip ASM 1061+ASM 1093,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported,supports Hot Plug and Hot Swap.
For All PCs --- PCI-Express x1 Interface is Compatible with PCI-Express x2 x4,x8,x16 slots.With low profile Bracket and 4 SATA Cablescompatible with 99% size chassis on the market.
System Support --- Connect 4 large capacity storage devices at the same time.Compatible with Windows XP / 2003 / Vista / 7 / 8 / 10 OS.No driver installation is required for 2 port operation, but drive is reqiried for 4 port operation.
Quality Assurance ---- 30 days money back guarantee, 1 year warranty, lifetime tech-support.Get Support [email protected] / Driver: http://www.ziyituod.net/ProDetail.aspx?ProId=92
7. Ziyituod SATA Card, 6 Port with 6 SATA Cable, 6 Gbps SATA Controller with Low Profile Bracket, Boot as System Disk, Support 6 SATA 3.0 Devices, Built-in Adapter Converter for Desktop PC
Feature
6 Ports Adapter Card --- You could add 6 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.For All PCs --- PCIe to SATA 3.0 6 Port Expansion Card with a low profile Bracket and 6 SATA Cablescompatible with 99% size chassis on the market.
Chipset --- With using The chip ASM 1062+1093*2,more stable and compatible.
System Support --- Connect 6 large capacity storage devices at the same time. Compatible with Windows XP / 7 / 8 / 10 / MAC / NAS / Linux OS.
Quality Assurance --- 30 days money back guarantee,1 year warranty, lifetime tech-support.Get Support [email protected] / Driver: http://www.ziyituod.net/ProDetail.aspx?ProId=93
8. Ziyituod PCIe SATA Card, 4 Port with 4 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices(SA3014)
Feature
You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
Chipset --- With using The Marvell 88SE9215 chip, improve this card more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.
For All PCs --- With a low profile Bracket and 4 SATA Cablecompatible with 99% size chassis on the market.
System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP / 7 / 8 / 10 / MAC / NAS / Linux OS.
9. JESOT SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices
Feature
[Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s[High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported
[Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE
[For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot
[Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card
10. MZHOU PCIe SATA Card 8 Port, PCIe to SATA Controller Expansion Card, 6Gbps SATA 3.0 PCIe Card with 8 SATA Cables, Marvell 88SE9215 + JMicron JMB5xx 8-Port Chip, Support for HDD or SSD
Feature
With this PCIe SATA card, you can add Eight SATA 3.0 8 Gbps devices to your computer (two of the satellites require a driver).You can boot the system from this SATA controller, but without RAID. If your motherboard has a RAID feature, you can create a RAID with this SATA card
The PCIe SATA card contains eight SATA cables to simplify the connection!
Use the Marvell 88SE9215 + JMicron JMB5xx chip to improve card stability and compatibility
Connect 8 mass storage devices at the same time. With Windows XP / 7/8/10 / MAC / NAS / Ubuntu
Recent Comments