Best metal epoxy filler for 2020
It’s hard to know which is good metal epoxy filler. There are alot of metal epoxy filler reviews on internet. In this article we suggest top 10 the best metal epoxy filler for you. Please read carefully and choose what is the best metal epoxy filler for you.
Best metal epoxy filler
1. PC Products 167779 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 1 lb in Two Cans, Charcoal Gray
Feature
Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applicationsBonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
Fills holes, castings, and molds
Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
Description
PC Products 167779 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 1 lb in Two Cans, Charcoal Gray2. J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
Feature
The Original J-B Weld two-part epoxy cold weld system in a 10 oz. pro sizeGreat for household repairs, automotive projects, plumbing and marine applications, crafts and more
Sets in 4-6 hours at room temperature and cures dark grey in 15-24 hours and rated at a tensile strength of 3960 PSI
Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled and will withstand temperatures of up to 550 degrees Fahrenheit
J-B Weld is proudly made in the USA
Description
J-B Weld Original Cold-Weld Formula Steel Reinforced EpoxyJ-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550F when fully cured.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.
J-B Weld is proudly made in the USA
3. J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.
Feature
Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metalGreat for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairs
Sets in 3-5 minutes and cures to a dark grey color in 1 hour
When fully cured, SteelStik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees F
J-B Weld is proudly made in the USA
Description
J-B Weld SteelStik Epoxy Putty StickSteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.
Use on:
Instructions
1. Cut:Remove required amount of putty.
2. Mix: Thoroughly knead putty with fingers to a uniform color.
3. Apply: Press putty firmly to the surface to be repaired.
J-B Weld is proudly made in the USA
4. Devcon 50345 Metal Patch and Fill - 3 oz.
Feature
Waterproof formula repairs broken, rusted or corroded metalBuilds up worn surfaces and fixes gutters, grates, fencing, tanks, etc.
Handling time: 20 minutes; Set time: 1 hour; Cure time: 6 hours
Dries to a charcoal gray color
Resistant to oil, gasoline and most chemicals
5. Permatex 25909 Liquid Metal Filler, 3.5 oz.
Feature
Works on metal, wood and concreteExcellent adhesion to galvanized metal
Repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations
Resists water, oil and gasoline
Suggested Applications: Oil pans, stake bed holes, door panels, cast metal parts
6. Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.
Feature
QuikSteel reinforced epoxy putty, 2 ounceWithstands up to 500 degree Fahrenheit temperatures
Sets in 5 minutes, cures in 1 hour
Hardens like steel, can be drilled, tapped, filed, sanded and painted
Drinking water safe, NSF-61
7. Hy-Poxy H-450 Alumbond 6.5 oz Aluminum Putty Repair Kit
Feature
Epoxy metal weld for aluminumRepairs HVAC, radiators, engine blocks, boat hulls, equipment, appliances
Can be drilled, tapped, sanded, threaded and painted
Gives you a non rusting, non magnetic aluminum gray color, stays gray even after sanding/polishing
Made in the USA
8. J-B Weld 8270 KwikWeld Industrial Professional Size - 10 oz.
Feature
JB KWIKWELD: Is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface typesCOUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world's strongest bond for your projects
SIMPLE TO USE: After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours
VERSATILE & DEPENDABLE: Ideal for automotive, plumbing, marine repairs, crafts, and more. It is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300F
DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond
Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator
Stays pliable for 2 minutes after mixing, sets in just 4 minutes, and cures fully in 4 hours
Waterproof; petroleum, chemical and acid-resistent
Super strong, non-toxic, and safe to use
Can be formed, drilled, machined, sanded, and painted
9. Gorilla Heavy Duty GorillaWeld Steel Bond 2-Part Epoxy, (Pack of 1)
Feature
Incredibly strong: 4250 psiSets in 10 minutes
Waterproof (bonded wood materials should not be submerged or soaked in water)
Dries Dark gray
Forms permanent bond
10. Epoxy Putty Stick, Yanyi Repair Epoxy Glue Metal, Plastic, Glass, Ceramic Multi-Purpose Cracks, Repair Fills for Quick Fixes
Feature
Used to repair pipes, water tanks, fuel tank leaks, industrial maintenance, tool crack repair, flooring, door seams, auto parts, swimming pool ceramic decoration, etc.Suitable for a variety of materials, including metal, wood, glass, ceramic, fiberglass, stone, marble and many hard plastics, temperature: -50 degrees to 120 degrees.
Easy to use: 6 * 5g individually packaged, no need to cut, evenly according to the amount, fill the repair area, can be polished, painted, colored after curing.
0-10 minutes: Mixing time, finish kneading and use. 10minutes-24 hours: curing time, the hardness increases rapidly. After 24 hours: completely hardened and permanently fixed.
High-quality materials: Good insulation after curing, do not soften when exposed to water, no food contact.
Recent Comments