Best foam backer rod 3/8 inch
Finding your suitable foam backer rod 3/8 inch is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best foam backer rod 3/8 inch including detail information and customer reviews. Let’s find out which is your favorite one.
Best foam backer rod 3/8 inch
1. Frost King C21CP Caulk Saver Bulk Contractor Pack, 3/8 inch Diameter x 350' Long,,, Grey
Feature
Saves on expensive caulkWorks with virtually all caulk
Moisture repellant
Made of durable, resilient poly foam
Easy to use and install
Description
Frost King caulk Saver reduces the amount of caulk you need to fill or seal large openings. Made of durable, resilient poly foam, it works with virtually every type of caulk and sealant.2. Sashco Pre-Caulking Filler Rope Backer Rod Roll, 100' Length x 3/8" Width, Grey
Feature
Makes professional joints that lastHelps fill in and insulate large caulk joints and allows the caulking to absorb more movement
Closed cell design repels water to help protect the joint from damage
Complies with ASTM C 1330, Type C
Measures 3/8-inches diameter by 100-feet length
Easy to fit - soft and pliable so it fits into the joint easily
Water resistant - unlike open cell backer rod, it repels water to help protect the joint from damage
Fills the joint so you use less caulk
Fully compatible with all substrates and sealants
Description
Sashco Sealants Pre-Caulking filler rope (Backer Rod). Makes professional joints that last. Helps fill in and insulate large caulk joints and allows the caulking to absorb more movement. Fills the joint so you use less caulk. Fully compatible with all substrates and sealants. Use behind chinking and caulking. Essential for ideal joint design.Caulking adheres to the sides of the joint, but not to the filler rope, which allows the caulking to stretch and compress without tearing or pulling away thus extending the caulk's life and effectiveness. Made of closed cell poly foam. Minimum R value of 2.5/inch. Available in gray color. Measures 3/8-inches diameter by 100-feet length.3. 3/8" Closed Cell Backer Rod - 2100 ft Roll
Description
Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330, ASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated, nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a "Domestic End Product" as defined by the Buy American Act , Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants, help the sealant assume an hourglass shape (which prolongs sealant life), and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants - butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 3/8" Feet per Roll: 2100 ft Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents, curing compound residue, laitance, and any other foreign materials. To ensure good bond, joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer - use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems4. Sashco 30100 Pre-Caulking Filler Rope Backer Rod, 3/8-Inch x 20-Feet, Gray
Feature
Easy to fit - soft and pliable so it fits into the joint easilyWater resistant - unlike open cell backer rod, it repels water to help protect the joint from damage
Fills the joint so you use less caulk
Fully compatible with all substrates and sealants
Description
Sashco Pre-Caulking Filler Rope Backer Rod is a 3/8-Inch by 20-foot soft cell backer rod with water-resistant skin.5. M-D Building Products 71464 Backer Rod For Gaps and Joints, 3/8-by-20 Feet, Gray
Feature
This item is a M-D Building Products 71464 Backer Rod For Gaps and Joints, 3/8-by-20 Feet, GrayPurpose of use for Hardware, ropes
This product is manufactured in United States
Provides a sound surface for caulking projects
Fills large gaps and openings to prevent drafts
Recommended for use in expansion joints in driveways and sidewalks
Twist multiple strands of cord together for extra large gaps; easily trimmed to size with scissors
3/8-inch by 20 foot
Description
M-D Building Products 71464 Backer Rod For Gaps and Joints, 3/8-by-20 Feet, Gray6. Albion Engineering 640-4 Backer Rod Insertion Tool - Road Model
Feature
Backer Rod Insertion ToolReinforced resin handle to withstand rough use on horizontal surfaces
Accepts a threaded standard broom handle or extension pole
Includes four depth settings: 1/8", 1/4", 3/8", 1/2"
Description
The 640-4 is a Backer Rod Insertion Tool which is reinforced with a resin handle to withstand rough use on surfaces like concrete and roadways.7. WJ Dennis & Company 238B Bulk Multi-Purpose Poly Foam Backer Rod, 3/8-Inch dia x 250-Ft., Grey
Feature
Helps reduce the amount of caulk needed to complete a jobInsulates pipe and vent openings and duct work
Ideal for inside or outside use
Closed cell foam
Description
Engineered from the ground up with you and your dog in mind, the Waterpik petwandPRO Dog Shower Attachment for Indoor-Outdoor use (PPR-252) is the fastest and easiest way to wash your dog at home. This professional-grade contoured wand washes dogs of all shapes and sizes. The petwandPRO dog shower attaches indoors to a standard shower head pipe or outdoors to a garden hose. Its unique WaterComb spray provides maximum cleaning coverage and the power you need for effective rinsing of thick fur, while the targeted narrow spray is perfect for hard-to-reach or sensitive areas. With one-handed operation, the EasySelect dial allows you to customize the water pressure and control the spray settings. Your dog will benefit from a faster and more thorough cleaning, and you can spend more quality time with your pet.8. 3/8" Closed Cell Backer Rod - 100 ft Roll
Description
Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330, ASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated, nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a "Domestic End Product" as defined by the Buy American Act , Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants, help the sealant assume an hourglass shape (which prolongs sealant life), and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants - butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 3/8" Feet per Roll: 100 ft Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents, curing compound residue, laitance, and any other foreign materials. To ensure good bond, joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer - use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems9. 3/8" Closed Cell Backer Rod - 100 ft Roll
Feature
Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin"3/8" Standard Backer Rod
Color: Gray
100 ft Roll
Description
CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed and therefore is available in a range of diameters to accommodate joints from 3/16 inch to 1-5/8 inch. It limits the depth of the sealant, therefore preventing excessive use of sealants. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate10. Sashco 30120 1-1/8-Inch by 10-Feet Pre-Caulking Filler Rope Backer Rod, Grey
Feature
Easy to fit - soft and pliable so it fits into the joint easilyWater resistant - unlike open cell backer rod, it repels water to help protect the joint from damage
Fills the joint so you use less caulk
Fully compatible with all substrates and sealants
Recent Comments