Top 10 fluke multimeter clamp for 2020

What are criterias of the best fluke multimeter clamp? It is not easy to find the answer. We spent many hours to analyst top 10 fluke multimeter clamp and find the best one for you. Let’s find more detail below.

Best fluke multimeter clamp

Product	Features	Editor's score	Go to site
	Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit		Go to amazon.com
	Fluke 116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit - Fluke-116/323 KIT		Go to amazon.com
	Fluke 325 Clamp Multimeter AC-DC TRMS		Go to amazon.com
	Fluke T5600 Electrical Voltage, Continuity and Current Tester		Go to amazon.com
	Fluke i400 400 Amp AC Current Clamp		Go to amazon.com
	Fluke 324 True RMS Clamp Meter		Go to amazon.com
	Fluke 323 True-RMS Clamp Meter		Go to amazon.com
	Fluke 4695932 375 FC 600A Ac/Dc TRMS Wireless Clamp		Go to amazon.com
	Fluke 376FC AC/DC Clamp Meter with iFlex For Industrial/Commercial Electricians, VFD Low Pass Filter For Accurate Measurements, Inrush Measurements, Bluetooth Connectivity For Remote Measurements		Go to amazon.com
	Fluke 902 FC HVAC True-RMS Clamp Meter		Go to amazon.com

Related posts:

1. Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit

Feature

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
The 117 multimeter features true-rms for accurate measurements on non-linear loads
The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage

Description

The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT

2. Fluke 116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit - Fluke-116/323 KIT

Feature

Fluke 116 Digital Multimeter features built-in thermometer for HVAC applications
Fluke 116 Digital Multimeter features microamps to test flame sensors
Fluke 116 Digital Multimeter low input impedance helps prevent false readings due to ghost voltage
Fluke 323 True-rms Clamp Meter measures 400 A AC current and 600 VAC and DC voltage
Fluke 323 True-rms Clamp Meter features True RMS AC voltage and current for accurate measurements on non-linear signals

Description

For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.

3. Fluke 325 Clamp Multimeter AC-DC TRMS

Feature

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
400 A AC and DC current measurement
Resistance measurement up to 40
Ac voltage make for the most accurate measurements on non-linear signals
Temperature and capacitance measurement
Frequency measurement

Description

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The FLUKE-325 is ideally suited for current measurements up to 400 a in tight cable compartments.

4. Fluke T5600 Electrical Voltage, Continuity and Current Tester

Feature

Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000
Easy and accurate OpenJaw current measurement
Optional holster attaches to a belt and neatly stows test leads
Can stay connected much longer than solenoid type tester

Description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10-foot (3m) drop. The T5 meets safety category: UL, CSA, CE, VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD display. AC current accuracy: +/- 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. (2)AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

5. Fluke i400 400 Amp AC Current Clamp

Feature

Companion to a digital multimeters to measure up to 200A AC
1mA per amp output guarantees easy reading on you meter
Take accurate current readings without breaking the circuit
Maximum conductor diameter 20mm, CAT III 600V safety rating
Companion to your DMM to measure up to 400 A AC
1mA/Amp output guarantees easy reading on you meter
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a very compact shape
Soft non-slippery overmold handle prevents from accidental touching live wiring

6. Fluke 324 True RMS Clamp Meter

Feature

Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement

7. Fluke 323 True-RMS Clamp Meter

Feature

Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms. Does not measure dc current
True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit.Resistance accuracy:1.0% 5 digits
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

8. Fluke 4695932 375 FC 600A Ac/Dc TRMS Wireless Clamp

Feature

Connect your meter to your smartphone with Fluke Connect Measurements
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the Cloud
600 A ac and dc current measurement
2500 A ac current measurement with (optional) iFlex flexible current probe

9. Fluke 376FC AC/DC Clamp Meter with iFlex For Industrial/Commercial Electricians, VFD Low Pass Filter For Accurate Measurements, Inrush Measurements, Bluetooth Connectivity For Remote Measurements

Feature

Connect your meter to your smartphone with fluke connect measurements
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the cloud
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC
Create and share reports from the field via email, or converse in real time with ShareLive video calls

10. Fluke 902 FC HVAC True-RMS Clamp Meter

Feature

200 a dc current measurements to measure flame rod
Extended resistance range to measure thermistors upto 60k
Capture flue gas temperature
Fluke Connect connects your meter to your phone through Bluetooth to help you get more done faster and safer
True-rms voltage and current for accurate measurements on non-linear signals

Conclusion

By our suggestions above, we hope that you can found the best fluke multimeter clamp for you. Please don't forget to share your experience by comment in this post. Thank you!