Top f4 flight controller with osd for 2022

Finding the best f4 flight controller with osd suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best f4 flight controller with osd

Product	Features	Editor's score	Go to site
	BETAFPV 2S F4 FC AIO Brushless Flight Controller No RX ESC OSD Smart Audio for 2S Brushless FPV Whoop Drone Meteor75 Beta75 Pro 2 Beta65 Pro 2		Go to amazon.com
	BETAFPV Upgraded F405 V2 FC 4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless Beta85X Micro Quadcopter Cine Whoop Drone		Go to amazon.com
	TCMMRC FC F4 Flight Controller 2-6S OSD BetaFlight 20x20mm for FPV Racing Drone		Go to amazon.com
	TCMM F4 Flight Controller OSD & 20A Blheli_S 2-4S DSHOT600 Brushless ESC for RC Drone FPV Racing 20x20mm		Go to amazon.com
	iFlight SucceX-E Mini F4 2-6S Flight Controller Integrated OSD and 5V / 2.5A BEC for FPV Race Drone		Go to amazon.com
	TCMMRC F4 10V 2-5s Flight Controller FC Built-in OSD LC Support PPM/ Ibus/ Sbus/ Dsmx for FPV Racing Drone Quadcopter		Go to amazon.com
	Matek Flight Controller F405-SE F4 FC Built-in OSD SD Slot Current Sensor 30.5x30.5mm Mounting for RC FPV Racing Drone		Go to amazon.com
	Matek F411-WING Flight Controller F4 FC Built-in OSD BEC & Current Sensor on Board for RC FPV Racing Drone		Go to amazon.com
	Flight Controller Board,F4 V3 ProBeataflight F4 V3 Flight Controller Set Built-in OSD Barometer BEC TF Slot for Wizard X220S Martian II 220mm FPV Racing Drone		Go to amazon.com
	iFlight SucceX-E F4 MPU6000 Flight Controller GPS F4 FC Built-in OSD BEC Current Sensor Black Box for FPV Racing Drone Quadcopter		Go to amazon.com

Related posts:

1. BETAFPV 2S F4 FC AIO Brushless Flight Controller No RX ESC OSD Smart Audio for 2S Brushless FPV Whoop Drone Meteor75 Beta75 Pro 2 Beta65 Pro 2

Feature

Suitable for a lighter 2S whoop drone, like Meteor75 Beta65 Pro 2 or Beta75 Pro2 etc. It intergrated a Betaflight F411 processor FC, Betaflight OSD, 1-2S 5A ESC. Saving more weight for 2S drone to get faster fly experience.
The 2S F4 FC AIO Brushless Flight Controller builted without receiver, but all the ports are available on this board. Compatible receivers signal include SBUS, IBUS, Spektrum Frsky DSM2/ DSMX etc except PPM.
The power supply is 1-2S, it comes with JST-PH 2.0 connector in default, pilots can use 2pcs 1S 300mAh battery work on this. If you want to use it with 2S battery, please change the cable to XT30 : www.amazon.com/dp/B07FFQ2TXQ
This 2S F4 AIO FC is supported programable LED but without alarm buzzer on it.
The FC can be used on 2S brushless whoop drone Beta75X and Beta65X, performance very well even no wash-out issue then, so you can just take this AIO FC to replace the stock FC&ESC.

2. BETAFPV Upgraded F405 V2 FC 4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless Beta85X Micro Quadcopter Cine Whoop Drone

Feature

Support 4S PowerThe greatest combination of F405 V2 FC with BLHeli_32 16A ESC built-in BetaFlight OSD is customized for Cine whoop drone Beta85X. Totally supports 4S POWER with a steady performance
BLHeli_32 16A ESCBLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC's that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200
F405 V2 FCF405 V2 FC upgraded the connection mode with accessories, added 4 extra pluggable ports for ESC, RX, VTX and led board, no need to solder, which is convenient for installation and decreasing the dislocated PIN mounting
Upgraded of ESCUsing single N-channel MosFETs on ESC board, which has a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board. Current sensor included. Power cable increases electrolytic capacitance, reducing the high voltage damage to the electronic components during the power-on, and functions as a circuit protection
Please noteThe F405 V2 FC BLHeli_32 16A ESC is without receiver, all the ports are available on this board. The details of soldering receiver please refer to the pictures on the left. When you connect the receiver to this F4 V2 FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all

3. TCMMRC FC F4 Flight Controller 2-6S OSD BetaFlight 20x20mm for FPV Racing Drone

Feature

VERY EASY TO SOLDER, The F4 Flight Controller has multiple ports, no soldering, just plug in the port line. This is convenient for beginners.
FAST RESPONSE TIME AND EXCELLENT SHOCK ABSORPTION,MPU6000 gyro with SPI bus mode
HIGHER RATE PID100MHz STM32F411 main control chip
CLEANER IMAGE DISPLAYOSD chip and 5V BEC on board
REASONABLE LAYOUT TO AVOID JUMPERSAccording to the installation requirements of most pilots, the functional pads are grouped together

4. TCMM F4 Flight Controller OSD & 20A Blheli_S 2-4S DSHOT600 Brushless ESC for RC Drone FPV Racing 20x20mm

Feature

20A ESC& FLIGHT CONTROL-This ESC is very easy to solder, and the flight control has multiple ports, no soldering, just plug in the port line.This is convenient for beginners.
PROJECT NAME-Item name:F4 Flight ControllerMCU: STM32F411Firmware: MATEKF411Gyro: ICM20602Support Receiver: PPM,SBUSOSD: YESBEC: 5V
PROJECT NAME-Item name: 4 IN 1 20A BLHeli_S ESCContinuous current: 20A Peak current: 25A (10S)BEC output: noInput voltage: 2-4SMain control chip: 48mhz EFM8BB2Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125MOS: 3*3MOS type: vs3610ae 30v64a.
PRODUCT PARAMETER-Size:29*31*15mm,Pitch:20*20mmSuitable for 2~4 inch Frame Drone Kit.
CUSTOMER FIRST-If the ESC flight control is due to quality problems, please contact us in time and we will solve it for you.

5. iFlight SucceX-E Mini F4 2-6S Flight Controller Integrated OSD and 5V / 2.5A BEC for FPV Race Drone

Feature

STM32 F405 MCU, Runs Betaflight 4.0.5
Size:25*25mm /20*20mm 3 mounting
Built in Blackbox
Input voltage2-6S,MAX 8S
On-board Betaflight OSD,Integrated 5V/2.5A BEC,Integrated LC Filter

6. TCMMRC F4 10V 2-5s Flight Controller FC Built-in OSD LC Support PPM/ Ibus/ Sbus/ Dsmx for FPV Racing Drone Quadcopter

Feature

Professional : The onboard OSD chip of the flight controller supports the DMA mode (using the F4 MCU to control the OSD), and the parameters can be adjusted using the BetaFlight assistant software. It has optimized circuit design and high-performance hardware. The flight controller has less noise and smaller throttle range oscillation without adding any delay.
Advanced : Support multiple types of receivers (such as: SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and other types of receivers). It has LED programming signal output port, supports programmable LED strips, and can adjust the strip color and flash mode through flight control.
High Quality: With voltage monitoring port (BAT) and current monitoring port (CRT), battery voltage and current can be monitored (requires additional ammeter). With the buzzer output port, it supports external alarm buzzer for audible warning or notification of aircraft flight status.
Fast Response : ICM20602 chip using SPI bus, integrated accelerometer, and gyroscope (gyroscope operating frequency can be set up to 32KHz). Using the STM32 F405 master chip, higher frequency PID cycle time and gyroscope can be run.
Easy to Use : Its very easy to solder. The F4 Flight Controller has multiple ports, no soldering, just plug in the port line. This is convenient for beginners.

7. Matek Flight Controller F405-SE F4 FC Built-in OSD SD Slot Current Sensor 30.5x30.5mm Mounting for RC FPV Racing Drone

Feature

Specifications :MCU: 168MHz STM32F405RET6;IMU: MPU6000 (SPI);Baro: DPS310 (I2C);OSD: AT7456E (SPI);Blackbox: MicroSD slot (SPI);VCP & 6x Uarts, 1x Softserial_Tx supported;9x PWM outputs (7x Dshot compatible with BF/INAV)
PDB Specifications: Input: 6~36V (2~8S LiPo) w/TVS protection;4x35A (Max.4x46A);BEC: 5V 2A cont. (Max.3A);LDO 3.3V: Max.200mA;Current Sensor 184A (Scale 179 in INAV/BF);Battery Voltage Sensor: 1K:10K
Firmware:INAV: MATEKF405SE;BetaFlight: MATEKF405SE;ArduPilot: MATEKF405-WING
Physical: Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm;Dimensions: 36 x 46 mm;Weight: 10g
Much more details, pls click here:http://www.mateksys.com/?portfolio=f405-se#tab-id-2

8. Matek F411-WING Flight Controller F4 FC Built-in OSD BEC & Current Sensor on Board for RC FPV Racing Drone

Feature

Flight Controller F411-WING (new),STM32F411, MPU6000, INAVOSD, BMP280, 2x UARTs, 1x Softserial, 1x I2C, 2x Motors 5x Servos, 2x BEC current sensor on board.
Current Senor: 78A, 6.5-30V ADC, Scale 423, Mounting: 24 x 24mm, 2mm ,Dimensions: 41 x 28 x 10mm.
FC Specifications: MCU: 100MHz STM32F41, IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) ,OSD: INAV OSD w/ AT7456E chip , Blackbox: No.
BEC 5V output: Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed.
Much more details, pls click here:http://www.mateksys.com/?portfolio=f411-wingtab-id-2.

9. Flight Controller Board,F4 V3 ProBeataflight F4 V3 Flight Controller Set Built-in OSD Barometer BEC TF Slot for Wizard X220S Martian II 220mm FPV Racing Drone

Feature

STM32 F405 MCU, Dshot support
Secure digital memory card blackbox, Baro(BMP280)
MPU6000 6 axis SPI Gyro & Accelerometer, SBUS/PPM AND Spketrum dsm-x Ports
Drag and Drop OSD configured via Betaflight Configurator
Smartaudio v2 support Tune your PIDs and configure the omnibus F C from your Transmitter

10. iFlight SucceX-E F4 MPU6000 Flight Controller GPS F4 FC Built-in OSD BEC Current Sensor Black Box for FPV Racing Drone Quadcopter

Feature

The design of SucceX-E series is based on the SucceX series, focuses on quality, the SucceX-E series is more affordable
This flight controller is ready for anything with 4 uarts, 8mb blackbox and a powerful F4 processor to run it all
Built-in OSD; Four LED plugs
Double 5V/3A BEC circuit, one BEC for flight control power supply, one BEC for LED power supply
36x36mm PCB with 30.5mm mounting holes, 4mm with Grommets 3mm,Weight: 7.6g

Conclusion

All above are our suggestions for f4 flight controller with osd. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using f4 flight controller with osd with us by comment in this post. Thank you!