Top cat6 shielded connectors for 2022
If you looking for cat6 shielded connectors then you are right place. We are searching for the best cat6 shielded connectors on the market and analyze these products to provide you the best choice.
Best cat6 shielded connectors
1. trueCABLE Cat6 Direct Burial, Shielded FTP, 1000ft, Waterproof, Outdoor Rated CMX, Black, 23AWG Solid Bare Copper, 550MHz, ETL Listed, Bulk Ethernet Cable
Feature
HIGH PERFORMANCE NETWORK CABLE. Our outdoor cat 6 lan cable is 23 AWG with 4 pairs (8 conductors). The overall aluminum (AL) foil shield helps eliminate cross-talk noise and can prevent electromagnetic interference (EMI). Suitable for Fast, Gigabit, and 10-Gigabit Ethernet. Supports bandwidth of up to 550 MHz.HASSLE FREE PACKAGING. 1000 feet (305 meters) of our trueCABLE product has been packaged on a tangle free, easy pull reel/spool so you don't have to worry about getting behind on your next job.
100% SOLID BARE COPPER CONDUCTORS. Pure bare copper produces a stronger signal along with better conductivity and flexibility when compared to copper clad aluminum (CCA).
FOR USE INDOORS & OUTDOORS. Designed to withstand sunlight, dirt, and moisture. Rugged and durable for extreme environments. Bury directly in the ground or use in conduit. Connect to what matters: computers, printers, gaming consoles, routers, ethernet extenders, switch boxes, VoIP phones, IP cameras, PoE devices, etc.
FLUKE TESTED, CUSTOMER APPROVED. All data cables meet or exceed ANSI TIA/EIA 568-C.2 standards, are RoHS compliant, and ETL listed.
Description
Condition: New from factory
Color : Black - Length : 1000 ft
Cable Construction:
- Our heavy-duty polyethylene (PE) jacket is outdoor rated and designed to withstand UV rays while the high-density polyethylene (HDPE) insulation and water blocking tape make it waterproof and resistant to moisture.
- The aluminum mylar shield helps protect the cable from outside interference and near-end crosstalk, commonly referred to as NEXT.
- The center separator/spline provides the cable extra support to help fight against twists and kinks. It also separates the pairs to further eliminate crosstalk.
- A tinned copper drain wire is built in to help ease termination of the cables shield by crimping and soldering.
- Our cables are manufactured with 100% bare copper wire, NOT copper clad aluminum (CCA) wire.
Please reference our trueCABLE spec sheet image for complete product information.
Supports all your devices
- TV
- Server
- Media Server
- Gaming Console
- Wi-Fi Router
- Printer
- Computer/Laptop
- Telephone
Commonly referred to as:
- Cat6 Cable
- Cat6 Ethernet Cable
- Cat 6 Network Cable
- Phone Cable
- LAN Cable
- RJ45 Wire
- Category Cable
2. Cable Matters 50-Pack RJ45 Shielded Modular Plugs with Strain Relief Boots
Feature
SHIELDED METAL RJ45 connectors terminate Cat 6A shielded, twisted pair cable; Robust die-cast metallic housing provides superior shielding and mitigates alien crosstalkCAT 6A PERFORMANCE for a 10 GBASE-T channel compliant network; Supports 23 to 26 AWG solid or stranded wire; Backwards compatible with Cat 6 and Cat 5e bulk cable
LARGE DIAMETER CABLE compatible with STP / FTP shielded Cat6A or outdoor rated cable; Ideal IP camera cable termination solution
COST-EFFECTIVE 50-PACK provides both heavy duty shielded RJ45 connectors and strain relief boots
SUPERIOR CONSTRUCTION of STP wire connectors combines a metal housing with a strain relief boot and gold-plated contacts to suppress alien crosstalk and provide a secure connection; Crimp-style plugs terminate solid or stranded cable with three-point staggered contacts to provide a secure connection
Description
Connect More with Cable Matters Cat 6A Networking Products10 Gig Network Solution
The Cable Matters Cat 6A Shielded Modular Plugs with Strain Relief Boots are the perfect choice for a complete Cat 6A shielded 10 Gigabit network system. They also offer a solution for terminating large diameter Cat 6 cabling such as outdoor rated cable.
Cat 6A Performance with a Lifetime Warranty
The combination of gold-plated contacts in a metallic housing with strain relief boots provide superior performance for a 10 Gigabit Ethernet rated network. These connectors are backed by a lifetime warranty and product support for peace of mind when purchasing.
Specifications
- RJ45 8P/8C Female with 50 micron gold-plated contacts
- Category Rating: Cat 6A
- Compatible with 23-28 AWG solid or stranded STP/FTP/UTP cable
Package Contents
- 50 x Cat 6A Shielded Modular Plugs
- 50 x Strain Relief Boots
Warranty
Limited Lifetime Warranty and Lifetime Product Support
3. Shielded RJ45 Cat6 Cat 6A Connectors - Pass Through Connector Gold Plated 3 Prong 8P8C Modular Plugs for FTP/STP Stranded Ethernet Cable & Solid Wire(50 Pcs/Jar,23AWG)
Feature
CAT6 LARGE CONNECTOR - Work with multi-stranded ,single-stranded and solid cables.This Ethernet ends are available for shielded 23AWG (insulated conductor diameter 1.08 -1.16MM) Cat6, and Cat6A round or flat Ethernet cable.Recommended to cooperate with RJ45 pass through crimp tool.EASY TO USE & SAVE TIME Pass through RJ45 end allows you to verify the wires sequences before crimping and avoiding wire sequence mismatch. Comparing to traditional non-pass through ,closed end types RJ45 plugs, It's easy to use and save time ,and great for beginners & professionals alike.
EXCELLENT SHIELDED PERFORMANCE Metal-shielded shell eliminate cross-talk and prevents electromagnetic interference (EMI) that be caused by nearby power lines or appliances .Great for 23AWG Shielded and direct-burial waterproof cables
GOOD PERFORMANCE Adopting 3 prong Gold plated contacts ,stronger antioxidant performance and the contacts are closely attached to core and connection is more stable.
WHAT YOU GET a jar of 50 pieces pass-through Ethernet plug
4. VCE (Gen 1)30-Pack Nickel Plated Shielded Cat6A/Cat7 RJ45 Modular Plugs, 3-Prong 50u" Gold Plated Ethernet Connector with Strain Relief Boots - Blue
Feature
SHIELDED METAL RJ45 connectors terminate Cat 6A, Cat 7 solid or stranded conductors; Robust shield termination and strain relief provide excellent shielding and reduce alien crosstalk for one-step termination processDIY RJ45 CABLE ENDS ideal for making custom length Ethernet patch cords; Supports 23AWG round or flat wires, for wire core OD 1.35~1.45mm. The wire OD of cables with the same AWG specifications may vary depending on the manufacturer. Please ensure AWG and OD MUST BOTH meet the requirements
SUPERIOR TRANSMISSION meets CAT6a performance requirements per ANSI/TIA-568-B.2-10 for a Gigabit Ethernet channel compliant network. 50u" gold-plated contacts on 8P8C network connectors provide faster speed with less interference
SOLID METAL HOUSING and gold-plated 3-prong contacts suppress alien crosstalk and provide a secure connection; Secure termination for shielded or outdoor-rated cable with an IP camera or security camera installation
With 30 x Blue Strain Relief Boots, taking the pressure off the cable, keeping dust and water from invading the plugs. (The Ethernet cable cap compatible with cable OD 7~8mm)
5. trueCABLE Cat6/6A RJ45 Pass Through Modular Plugs, Shielded (STP) External Ground Connector, UL Listed, EZ Crimp, Gold Plated 3 Prong 8P8C, 20 Pieces
Feature
PASS THROUGH DESIGN. No more load bars means less waste and frustration. The ability to see the conductors come through the front of the plug allows you to verify the correct TIA 568A or 568B color sequence which minimizes bad terminations.MAXIMUM PERFORMANCE. Ensuring the best cable to plug combination, pass through plugs allow a push-pull method to seat the cable jacket as far into the plug as possible, minimizing crosstalk. Triple prong gold plated contacts. Staggered conductor design. Shielded (External Ground). Suitable for PoE++.
VERSATILE. Compatible with 23AWG stranded or solid conductors. Suitable for cable jacket diameters up to 8.00mm and conductor insulation diameters from 1.05 - 1.25mm. Terminate and crimp external ground tab with the trueCABLE all in one V2 tool.
QUALITY GUARANTEED. ANSI/TIA 568 2.D Certified and Validated with trueCABLE F/UTP Ethernet cable. ETL, UL, SGS (RoHS REACH / SVHC) Verified and Tested. FCC compliant.
20 PIECE RESEALABLE BAG. These shielded pass through RJ45 ends are sure to make your install hassle free.
6. Shielded RJ45 Cat6 Cat6A Pass Through Connectors - 3 Prong 8P8C Gold Plated Ethernet Ends for FTP/STP Network Cable & Solid Wire 20Pack
Feature
IMPORTANT INFORMATION:Only work with shielded or unshielded cat6 cat6a cable(multi-stranded ,single-stranded and solid cables) with an insulated conductor diameter of 1.08-1.18mm. Confirm your cable meet above requirements.To do this, please consult your cable's user manual, contact the seller, or check the manufacturer's website.(For the best results,RJ45 pass through crimp tool are recommended.)PASS-THROUGH ETHERNET ENDS Allow for the wires to feed through the connector for easier alignment. The excess wire is trimmed during the crimping process providing a quicker and more efficient experience.
3-PRONG & GOLD PLATED CONTACTS stronger antioxidant performance ,3-prong plugs work with stranded and solid copper conductors(2 prong plugs work with stranded copper only), provide fast, reliable connector installations for data applications
SUPPRESS EMI AND CROSSTALK Metal housing reduce pair-to-pair crosstalk, surrounding EMI and help to ensure data integrity and high-speed performance.
Package includes a bag of 20 pieces pass-through Ethernet connectors.
7. Platinum Connector Shielded ESD CAT6 Connector 50 Pieces with 50 Boots/Strain Relief -RJ45 End Pass Through Ethernet Modular Snap Plugs/Clips secures ESD Drain Wire for 24-23AWG Cable
Feature
Durable Shielded connector with ESD hole that secures ground wire easily. You can terminate this connector with our pass through crimper (crimp and trim simultaneously). This connector eliminates all the additional work (soldering or copper taping) of crimping shielded connector and secures ground drain wire firmly.These Shielded CAT6 connector with ESD hole from Platinum Connector are designed to meet the demands of a fast paced work environment with high-quality crimp plugs and efficiently secures the ESD wire to complete the crimping process
You can verify the required color coding standards (ANSI/TIA/EIA) and before finalizing the crimping process thus reduce any wasteage
Supports Shielded CAT6 regular and special cable's data transmitting capability of up to 1000Mbps (1Gb), used for CCTV, Security Cameras, Routers, Switches, Printers, and Servers.
Ensures electromagnetic interference or discharge (EMI or ESD) free signal for large CAT6 23AWG 4-pair Solid and stranded cable.
8. RJ45 CAT5 CAT6 Shielded Connector End Pass Through Gold Plated Ethernet 8P8C 3u Modular Plug 20Pack
Feature
RJ45 CAT6 CAT5 CONNECTORS not only let you make enternet cables in custom lenths without breaking the bankbut also can work effectively with every model of pass through crimper tool and RJ45 cat5 cat6 connectors for 24AWG cable .(NOTEPlease straighten the wires and cut it neatly in order to Pass Thru easier)Pass-thru design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.in addition,as wires are inserted through the connector and out the other side,making sequence verification easier.
Enhances signal integrity and clarity by reducing the distance between wire twists and contacts.gold plated 8p8c 2prong makes the contact attach to the core closer and the data flow stable.
Lower pair-to-pair crosstalk -- fully shielded products lower pair-to-pair crosstalk, alien crosstalk and considerably improved immunity to noise at all frequenciesespecially above 30 mhz when cable balance starts to significantly degrade.
Foldable shrapnel-even if the shrapnel is folded 180 degrees and then crimped with pliers, you can still hear click" when you insert it into the notch again.
Package List: 20 pieces cat5e cat6 pass thru connectors( Do not fit 23awg cable)
9. RJ45 Cat6 Connector Pass Through Cat6 Cat6a Ends Gold Plated 8P8C Ethernet Shield Modular Plugs for 23Awg/24AwgCable 50Packs
Feature
RJ45 Cat6 Cat6a Connectors-let make enternet cables in custom lenths without breaking the bank so that you can make your own ethernet easier by yourself as the lenth you need. It can work effectively with every model of pass through crimper tool.Fully Shield Cat6 Cat6a Plugs -can lower pair-to-pair crosstalk, alien crosstalk and considerably improved immunity to noise at all frequencies. Substantially improve noise immunity at all frequencies, especially above 30 mhz when cable balance starts to significantly degrade.
Pass Through Design Simplifies Teminations -these cat6 connectors have staggered jacks(diameter 1.20mm),as wires are inserted through the connector and out the other side making sequence verification easier.
Enhances Signal Integrity and Clarity- the hole is stagger, the twists in each pair can be pulled closer to the contacts than conventional plugsby shortening the distance between wire twists and contacts.Gold plated 8p8c and stagger hole makes the contact attach to the core closer and the data flow stable.
Foldable shrapnel-even if the shrapnel is folded 180 degrees and then crimped with pliers, you can still hear click" when you insert it into the notch again.
Package List 50 pieces cat6/6a shield pass through connectors.
10. RJ45 CAT6a Cat6 Connector with Grounding Buckle Gold Plated 8P8C Grounded Pass Through Shield Plug 50PC(External grounding)
Feature
RJ45 LARGER CAT6A/6 CONNECTORS FOR 23AWG let make enternet cables in custom lenths without breaking the bank.In addition,but also can work effectively with every model of pass through crimper tool.PASS THROUGH DESIGN SIMPLIFIES TEMINATIONS --The Cat6A connectors have staggered jacks(diameter 1.20mm),as wires are inserted through the connector and out the other side making sequence verification easier.In Addition,As the pass-thru design, the Twists in Each Pair can be pulled closer to the contacts than conventional Plugs.
Ground Wire Buckle--discharge static electricity effectively,decreases crosstalk and markedly increases performance.
Enhances signal integrity and clarity by reducing the distance between wire twists and contacts.gold plated 8p8c 2prong makes the contact attach to the core closer and the data flow stable.
Lower pair-to-pair crosstalk -- fully shielded products lower pair-to-pair crosstalk, alien crosstalk and considerably improved immunity to noise at all frequenciesespecially above 30 mhz when cable balance starts to significantly degrade.
Recent Comments