9 best solder vacuum
Finding your suitable solder vacuum is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best solder vacuum including detail information and customer reviews. Let’s find out which is your favorite one.
Best solder vacuum
1. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Feature
One-handed solder sucker with powerful suction Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.Desoldering Wick with copper braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
ABS body with non-slip sponge and Nylon nozzle desoldering pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
Widely used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
Description
TABIGER Solder Sucker & Solder WickIt's a must-have tool for electronics kit, you can use them togethersolder sucker for large amounts, while the solder wick used in small, hard to reach areas.
How to Use the Solder Sucker:
Step 1: Press the plunger down until you hear a click sound;
Step 2: Heat up solder around item to be removed by using a soldering iron;
Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
Step 4: Repeat this process if necessary.
How to Use the Desoldering Wick:
Step 1: Place the wick over the solder you need to be removed and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed.
Package Included:
1* Solder Sucker
2* Solder Wick
2. OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) Desoldering Vacuum Pump Solder Removal Tool
Feature
Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
Solid Construction. The solder sucker has plastic backing to ensure stability.
Description
Get the solder off and replace them with newer ones, which it is very common when soldering, so this solder sucker and solder wick will be your perfect companion to suck the solder away effectively.Suck the Solder Away Easily
The solder sucker measures 7.48"X0.79", which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.
Clean the Solder in Detail
2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Why Choose Us:
All Our Products are Produced under Strict Quality Inspection
12-Month Worry-Free Warranty and Free Life-time Technical Support
Professional After-Sales Team
99% Positive Amazon Feedback
Package Included:
1* Solder Sucker
1* Solder Wick
Warranty:45 days money-back and 12-month, worry-free Guarantee!
3. Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump
Feature
The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
The desoldering iron gun if controlled automatically by the micro-processor.
The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
LCD (display data: set temperature, actual temperature)
Description
Technical data:1. Input voltage: 100-130V
2. Power consumption: 140 W
3. Main fuse: 3,15 A
4. ACCUM pressure: 600 mm Hg
5. Temperature range: 160C ~ 480C
5. Desolering Gun Voltage: 24 V (gun)
6. Gun Power: 80 W (heat up rating 130 W)
7. Heating element: PTC ceramic heater
Application :
Protable,widely use,suitable for frequent welding,also suitable for electronic products production line,mobile phone repair industry,precision electronic maintenance industry SMT components , plug-in element,platoon line, PCB integrated component of desoldering maintenance work.
Package Included:
Desoldering Station ZD-915 with US standard of power cord
Desoldering Gun with tip 1,0mm
2 tips for desoldering gun 0,8mm and 1,2mm
3 needles for cleaning the desoldering tip
Additional Filter for the desoldering gun
Support for desoldering gun to place at the station
Manual in Englisch
4. Desoldering Gun S-993A 110V 100W 50HZ Electric Desoldering Gun Solder Sucker Gun Suction Tin Gun Vacuum Desordering Pump
Feature
Portable integrated design, the overall compact and lightweightStrong suction tin power, except tin easy and easy
High power heating, with fast heating function
Stable operating temperature and instantaneous temperature function
Storage tin tube made of high strength, high temperature resistant plastic
Description
Model: S-993A.
-Power supply voltage: AC 110V ,50Hz.
-Vacuum pump: diaphragm type.
-Power consumption: 100W.
-Heating parts: ultra-longevity imports of ceramic heating core.
-Temperature range: 350 ~ 450 (stepless).
-Maximum pressure reached time: 0.2 seconds.
-Insulation resistance: 100 M.
-Work: continuous.
Body Length:210mm;
-Suction nozzle specifications: 1.0mm
5. GBSTORE Blue 13" Sucking Vacuum Desoldering Pump Solder Sucker Remover Hand Tool
Feature
Circuit maintenance, integrated circuit disassembly, desoldering necessary tool.Anti-skid design, easy to hold and use.
Quality material,high heat-resisting suction nozzle.
Working principle:Working like Needle Tubing.
Heavy-duty,Length:13", Diameter: 1.65", Tip Diameter: 0.32".
Description
Heavy-duty,Length:13", Diameter: 1.65", Tip Diameter: 0.32".Material: Plastic ,Metal.
Color: blue.
Single hand operation use.
The blue plastic heavy duty desoldering vacuum pump solder iron remover sucker hand tool provides easier working task for all kind of soldering job.
It is simple depress the plunger, place the tip of the nozzle against the solder that you want to remove. Large & solid handle feel.
High quality & large tip and strong vacuum remove all solder within a second. This desoldering vacuum pump will make your work more convenience.
Package included:1 x Solder Removal Tool.
6. Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack
Feature
Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suckSimple design allows easy one-handed use,lightweight and compact,suck the solder away easily
Very sturdy,will worke good to remove existing solder from a circuit board
Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
A must have excellent solder sucker which fits nicely in your tool box
Description
It allows one hand operation,just cock it and press the trigger button when you are ready
If you need to fix household appliances,this tool will help you keep solder off everything when putting the new leads in
100% MONEY BACK GUARANTEE
If you have any question about our product or service,please feel free to contact Teenitor and we will do our best to asist you within 24 hours
A couple of tips for the customer:
- If you can not get the solder to melt with your iron,apply a little solder to it first - it will help conduct the heat into the existing solder
- Ultimately,this thing is pretty much disposable and limited time use,every couple joints you desolder you should take it apart and clean out the solder to keep it working
How to Use the Desoldering Pump:
Step 1 - Press the plunger down until it is been locked and you will hear a click
Step 2 - Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid
Step 3 - Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip,pull the trigger
Step 4 - Repeat this process if necessary
Product Description
Material: aluminum + plasic
Right Size: 7-1/2 inch length x 3/4 inch diameter
Weight: about 60g
Special Design: right or left handed design allows easy one-handed use
Package Includes
1 x 3pcs/pack Solder Sucker
KINDLY NOTE
- If some items have a slight smell from the paint applied,this smell will dissipates after a few days
- As measurement ways are different by different people,maybe have 1-2cm difference
7. Anbes Soldering Iron Kit Electronics, 60W Adjustable Temperature Welding Tool, 5pcs Soldering Tips, Desoldering Pump, Soldering Iron Stand, Tweezers
Feature
Soldering Iron Support Station- Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged.Soldering Iron Unique Features- Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200-450.Heat up fast and work great.
Solder Sucker Desoldering Pump- Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints.
Widely Used & Carry Portable- Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag.
14-In-1 Soldering Kit- Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube,soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire.
Description
Anbes Welding Soldering Iron Kit design for various uses,from home DIY,electrical repairs jobs and other soldering project.Why do you choose us:
14-in-1 Set: Thissetoftoolsiscomplete,you dont need to buy the other accessories from the amazon store.
Safety of Tools: Soldering iron stands dual safety design and Heat-insulated and anti-scalding silicone handle protects users from burn.
Easy for Storage & Carry: PU carry bag is very convenient to store small tools and easy to carry,you can take it anywhere for repair or DIY.
Specification:
Work Voltage: 110V
Power: 60W
Temp Rang: 200 - 450
Tweezer: ESD-15, ength 4.7inches
Soldering Iron Stand: Steel
Tips Model: 900M series
Desoldering Pump: Plastic and aluminum alloy
Carry Bag: PU leather
Package Included:
Soldering Iron x 1
Desoldering Pump x 1
Different Soldering Iron Tips x 5
Tin Wire Tube x 1
Soldering Iron Stand x 1
Tweezers x 1
Wire Stripper Cutterx 1
22awg Electronic Wire x 2
PU Carry Bag x 1
Warm Tips:
Please be really careful when you are using the tools in avoidance of pricks or other injuries,Youd better keep it somewhere kids cant reach.
The iron heats up fast,so please select a suitable temperature. Working for long hours and high temperature may shorten its life.
Do not allow the iron to idle at operating temperatures for extended periods, This could burn the soldering iron and even other things.
The 5 tips are general 900M series and you can buy replacement on Amazon.
8. Solder Accessory Kit with CHP-170 Micro Soft Wire Cutter (5 Inch Diagonal, Flush Cut), Solder Braid/Wick and Solder Sucker for Solder Removal and 16 Gauge Copper and Soft Wire
Feature
[Wide Application] XOOL Solder Accessory Kit is suited for jewelry maker, crafts, anyone fixing electronics or all kinds of hobbyists to remove solder and cut 16 gauge copper and soft wire. The flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge copper and soft wire. Solder sucker has powerful suction can quickly remove solder from circuit board.[Superb Quality]The CHP-170 Micro Soft Wire Cutter is made of heat-treated Hardened Carbon Steel, which is durable enough for cutting soft copper, steel wire, terminal wires easily. The solder sucker adopts new high-strength all aluminum construction that is resistance to beat, corrosion and have good heat dispersion. The excellent PETT sucker nozzle is resistance to high temperature and fusion. The push rod is made of durable stainless steel.
[Easy to use] After using the solder sucker, you just push the button and bye-bye messy solder. You -do- need to clean the tip of the solder sucker right away so it doesn't get clogged. The CHP-170 Micro wire cutter is an ultra-precise tool. It cuts fine with a clean and reverse angled cutting surface. Unique, user friendly, design includes return spring and Anti-slid handle for increased precision and control.
[Ergonomics Design] The handle of cutter is made of non-slip rubber/plastic without being to sticky, doesn't attract dust or dirt. And this anti-skid handle can improve work efficiency. The blades are hardened carbon steel, and after a long time show no nicking or bending. If you don't have adequate surface area for suction and removing the solder, you can use the solder wick.
[Labor-saving] The handle of cutter will protect your palm when cutting, softening the feel when applying cutting pressure. Spring back handles feel firm and just right for repeated cuts. High quality desoldering wick with a special chlorine-free flux can't damage precise tool and instrument. Desoldering pump has right or Left handed design allowing easy one-handed use.
Description
Suck Solder Easily: The solder sucker will fit your hands perfectly no matter if you are left-handed or right-handed. With all aluminum body and high pressure vacuum, our desoldering pump can help you suck the solder away effectively and quickly.Clean the Solder in Detail: 2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Package List:
1* Solder Sucker
1* Solder Wick
1* CHP-170 Micro Soft Wire Cutter Notes:
The solder sucker is only plastic, so be sure not to touch it to the soldering iron for a long time.
ALWAYS WEAR EYE PROTECTION and CUT WIRE MAX THICKNESS 16 Gauge
9. Vastar AD444 Solder Sucker Desoldering Vacuum Pump Solder Removal Tool
Feature
High quality: super high pressure vacuumLight material: aluminum body frame
Size: 7-1/2" length x 3/4" diameter
Special design: right or Left handed design allows easy one-handed use
Worry-free warranty: 45 days money-back & 18-month warranty
Description
Vastar Solder Sucker is a necessary tool. It used to remove solder from capacitors, resistors, and other components easily.
Package included:
1 x Vastar Solder Sucker
Warranty:
45 days money-back & 18-month warranty. For any question, please feel free to contact us. We will get back to you within 24 hours.
Recent Comments