10 best astro pneumatic air hammer bits for 2019
Finding your suitable astro pneumatic air hammer bits is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best astro pneumatic air hammer bits including detail information and customer reviews. Let’s find out which is your favorite one.
Best astro pneumatic air hammer bits
1. Astro 1822 1/2" Nano Impact Wrench
Feature
450 ft./lbs. of max torqueExtremely short profile, full length of less than 3-7/8"
Incredibly lightweight at 3.0lbs
3 forward and 3 reverse settings
Innovative twin hammer design
Description
The Astro Pneumatic Tool 1822 1/2" Nano Impact is the latest in mini lightweight impact development. At only 3.85" long (or about 1/2" longer than a credit card), the twin hammer 1822 Nano Impact is deceivingly powerful, registering a max of 450 ft./lbs. of torque. The 1822 was designed to be extremely light (3.0lbs.) and well balanced when connected to an air line, and operates in 3 forward and reverse speeds. Featuring a twin hammer design for increased reliability, and coming from Astro's robust ONYX line, this impact has more than just the numbers behind it.2. Grey Pneumatic (CS807 7-Piece Chisel Socket Set
Feature
7 PC CHISEL (GRY-CS807)Description
.498 shank chisels for heavy duty service work. 7 Piece Set contains: 5/8" Flat Chisel, Tapered Punch, Straight Punch, Dual Blade Panel Cutter, Rivet Cutter, Bushing Splitter and a 1-1/4" Diameter Hammer. Packaged in a molded storage tray.3. Astro Pneumatic Tool 4980 0.498" Shank Super Duty Air Hammer/Riveter
Feature
Maximum power air hammer for heavy duty off-road, industrial and automotive applicationsRemove or install rivets in I-beam suspension and work site equipment, heavy duty servicing of truck bushings, springs, king pins and more
Speed: 1800 RPM
Bore: 3/4-inch
Stroke: 2-11/16"
Description
The Astro 4980 0.498" Shank Super Duty Air Hammer / Riveter is built with maximum power for heavy duty off-road, industrial, and automotive applications. This unit is great for installing/removing rivets in I-beam suspension, and on site equipment, as well as heavy duty servicing of truck bushings, springs, king pins and more. Specifications: Air Inlet: 1/4" Speed: 1800 RPM Bore: 3/4" Stroke: 2-11/16" Weight: 4.8 lbs. Contents: Spring Retainer.4. Chicago Pneumatic CP717 Super Duty Air Hammer
Feature
Most powerful CP air hammer for automotive, truck and off road equipmentPositive action trigger for precise control because of spool valve
1,800 blows per minute
.498-Inch diameter chisel shank to handle the extra power
Longer stroke heavy duty piston
Description
Most powerful CP Hammer for automotive, truck, off-road equipment use..498" diameter chisel shank to handle the extra power.Positive action trigger for precise speed control.Applications: Front end work, king pin removal, and installation of bulldozer walking beam bushing, removal of truck anchor springs, heavy-duty spring bushings.Specifications: Shank Opening: .498"Weight: 4.75 lbs.Bore Diameter: 3/4"Piston Stroke: 2-11/16"Avg. Air Consumption: 3 CFMAir Inlet: 1/4" NPTFMin. Hose Size: 3/8"Sound dBA Pressure: 95 dBABlows per min.: 18005. Chicago Pneumatic CP7150 Air Hammer
Feature
Powerful and Cost EffectiveStandard 0.401 Round Shank
Easy Change Retainer for Quick Accessory Changing
1-Year parts and labor
Description
Standard .401 round shankMost powerful hammer in its classLonger piston stroke for more powerIntegral muffler minimizes exhaust soundExcellent power / weight ratioFast action and withstands rugged useIdeal tool for heavy duty applicationPower (Joules): 9.5Blows per minute: 2300Cold rivet capacity: 6,4 mmCold rivet capacity: 6,4Bore: 19 mmStroke: 89mmChisel rivet set shank: 10.2 mmShank: roundWeight: 1,9Length: 225Average air consumption: 177 l/sActual air consumption: 708 l/sAir inlet thread size: 1/4in.Min. hose size: 10 mmMin. hose size: 10 mmSound DBA pressure: 100Vibrations: 9,4 m/sK: 1,7 m/s6. Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set
Feature
Taper Punch: 3/32-inchby5-1/4-inch, 1/8-inchby5-3/4-inch, 5/32-inchby6-inch, 3/16-inchby6-1/4-inch, 1/4-inchby6-3/4-inchCold Chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inch by 6-1/2-inch
Pin Punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 5/32-inch by 5-inch, 3/16-inch by 5-1/4-inch, 1/4-inch by 5-3/4-inch
Center Punch: 1/8-inch by 5-inch, 3/16-inch by 6-inch
Product material: CR-V and hardness: 54~58HRC
Description
This kit is a complete punch and chisel solution. It is made of heat treated chrome vanadium steel. Includes storage pouch and chisel punch gauge. The product includes a storage pouch and chisel punch gauge. The kit includes the following: Punches - (5) Taper punches, (5) Pin punches, (2) Center punches. Chisels - (3) Clod chisels, (1) Chisel gauge and (1) Plastic storage tray. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.7. Lisle Drake Off Road Tools 41500 Fork Kit
Feature
Drake off road tools for separating ball joints, tie rods, pitman arms and other usesKit consists of three forks and two handles, one for hammering, the other for use with an air hammer (.401 inch shank)
All forks are threaded to interchange with either handle
Forks are heavy-duty forgings, handles are heat-treated alloy steel
Description
Drake off road tools li41500 features: -For separating ball joints, tie rods, pitman arms and other uses. -Six tools in one for exceptional versatility and value. -Kit consists of three forks and two handles, one for hammering, the other for use with an air hammer (.401" shank). -All forks are threaded to interchange with either handle. Forks are heavy-duty forgings, handles are heat-treated alloy steel kit includes: 41510 handle. Product type: -Separators. Use: -Pitman arm/tie rod/ball joint. Multi-use: -Yes. Quantity: -Set. Dimensions: Overall height - top to bottom: -1 inches. Overall width - side to side: -7.6 inches. Overall depth - front to back: -12.6 inches. Overall product weight: -3.75 pounds.8. Astro Pneumatic Tool ADN38 XL Rivet Nut Drill Adapter Kit
Feature
Easily convert your cordless, pneumatic or corded drills into a power rivet nut setterIncludes SAE sizes: 10-24, 1/4-20, 5/16-18, 3/8-16 and metric: M5, M6, M8 & M10
Use 12V and up cordless drills for aluminum and steel rivet nuts, or 18V+ for larger sizes like M10 & 3/8" and/or stainless (drills must feature torque limiting clutch)
CNC machined from solid billet aluminum and features durable bearings
Sizes above ", or when setting stainless, may require you to grip the tool significantly tight to prevent tool spinning
Description
The Astro ADN38 XL rivet nut drill adapter kit - 3/8" capacity is made from a single CNC machined piece of aluminum billet and features Japanese bearings. Easily convert a cordless, pneumatic or corded drill into a power rivet nut setters. This kit includes 8 mandrels and nosepieces in the following SAE and metric sizes: 10-24, 1/4-20, 5/16-18, 3/8-16 and M5, M6, M8 & M10. For aluminum and steel rivets nuts use a 12V and up corded drill or an 18V and up for larger sizes like M10 & 3/8 and for stainless rivet nuts (all drills must feature torque limited clutch.)9. Ingersoll Rand 114GQC Air Hammer - 3 PC Chisel Set with Tapered Punch, Panel Cutter, Flat Chisel, 2-5/8 Inch stroke, 3500 BPM, Lightweight, Compact, Gray
Feature
Includes 3-piece chisel setQuick change chisel retainer
Longer life alloyed steel barrel and heat-treated piston
Diffused handle exhaust
Ergonomic grip
Description
Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.10. Sunex SX243 Hd 250-Mm Long Barrel Air Hammer
Feature
Long barrel design with 2,200 BPMAluminum alloy housing with ergonomic comfort grip
Hardened steel barrel for maximum durability
Built-in regulat or knob for easy adjustment
Specificat ions: blows per minute 2,200, bore (-Inch) 3/4, stroke (-Inch) 3-3/4, air inlet (npt) 1/4
Recent Comments